Preparing The Computer For Disassembly - HP Compaq V3000 Maintenance And Service Manual

Removal and Replacement Procedures
5.3 Preparing the Computer for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
12-cell, 8.8-Ahr
6-cell, 4.0-Ahr
6-cell, 2.55-Ahr
6-cell, 2.2-Ahr
4. Remove the battery by following these steps:
a. Turn the computer upside down with the front panel
5–4
Battery Spare Part Number Information
toward you.
Maintenance and Service Guide
417067-001
417066-001
441611-001
440772-001