Top Cover - HP ENVY 17 Maintenance And Service Manual

5. Release the ZIF connector (3) to which the keyboard light cable is attached, and then disconnect
the keyboard light cable (2) from the system board.
6. Remove the keyboard.
Reverse this procedure to install the keyboard.

Top cover

Description
Top cover (includes TouchPad and cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the memory module compartment cover (see
6. Remove the keyboard (see
Remove the top cover:
1. Turn the computer upside down, with the front toward you.
2. Remove the four rubber feet (1) from the base enclosure. The rubber feet are included in the
Rubber Feet Kit, spare part number 603798-001.
Battery on page 38).
Keyboard on page 51).
Memory module on page
Component replacement procedures
Spare part number
603793-001
43).
53