3. Remove the 3 Phillips PM2.0×4.0 screws 1 that secure the
USB board and frame to the top cover.
4. Remove the Phillips PM 2.5×7.0 screw 2 that secures the
USB board and frame to the top cover.
5. Lift the rear edge of the USB board and frame 3 until it
disengages from the top cover.
6. Slide the USB board and frame away from you 4 and remove
it from the top cover.
Removing the USB Board and Frame, Compaq Presario and
HP Compaq nx7220 V4200 Models
Maintenance and Service Guide
Removal and Replacement Procedures
5–85
Comments to this Manuals
Latest comments: