Switch Cover - HP 8510w Maintenance And Service Manual

Mobile workstation and notebook pc
Hide thumbs Also See for 8510w:
Table of Contents

Advertisement

Switch cover

Description
Switch cover (includes LED board and cable)
Before removing the switch cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the keyboard (see
Remove the switch cover:
1.
Turn the computer upside down, with the front toward you.
2.
Remove the Torx T8M2.5×9.0 screw (1) and the three Phillips PM2.0×2.0 screws (2) that secure
the switch cover to the computer.
3.
Turn the computer right-side up, with the front toward you.
4.
Open the computer as far as possible.
5.
Release the switch cover by lifting the left and right edges of the switch cover (1) until the switch
cover disengages from the computer.
Battery on page
47).
Keyboard on page
58).
Spare part number
452226-001
Component replacement procedures
75

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8510pCompaq 8510pCompaq 8510w

Table of Contents