Heat Sink - HP 8510w Maintenance And Service Manual

configurations, battery fast charging, and software requirements. Exhaust air is displaced through the
ventilation grill located on the left side of the computer.

Heat sink

Description
Heat sink (includes a heat sink clip and replacement thermal material)
Thermal Material Kits
For use in all countries or regions except Japan and Asia countries and regions
For use only in Japan and Asia Pacific countries and regions
Before removing the heat sink, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the keyboard (see
6.
Remove the fan (see
Remove the heat sink:
1. Remove the six Phillips PM2.0×3.0 screws (1) that secure the heat sink and the heat sink retention
clip to the base enclosure.
2.
Release the heat sink retention clip (2) by sliding it to the right.
64 Chapter 4 Removal and replacement procedures
Battery on page 47).
Keyboard on page
Fan on page 63).
58).
Spare part number
452227-001
413706-001
445853-001