Multiple Handset Use; Handset Locator; Join A Call In Progress - AT&T CL82351 User Manual

Multiple handset use

Multiple handset use

Handset locator

The handset locator feature is useful if you misplace
any handsets.
To start the paging tone:
HANDSET LOCATOR on the telephone base
• Press
/
to start the paging tone on all handsets for
60 seconds.
NOTE: If you press
the ringer of that handset stops, but the paging to the rest of the
handsets continues.
To stop the paging tone:
• Press PHONE/
(0-9, TONE , or #) on the handset(s).
-OR-
• Press HANDSET LOCATOR on the telephone base.
/

Join a call in progress

When a handset is already on a call and you would like to join the call, press
PHONE/
FLASH
OFF/
Press
CANCEL
end the call. The call does not end until all handsets hang up.
NOTE: You can use a maximum of 5 system handsets at the same time on an outside call.
If a sixth handset attempts to join the call, the handset screen shows Unable to call.
Try again.
OFF/
CANCEL
, /SPEA�ER SPEA�ER, or any dialing key
FLASH
/SPEA�ER SPEA�ER on your handset.
or
or place the handset in the telephone base or charger to
or MUTE/ on a handset,
DELETE
24
**Paging**