User Guide HP Photosmart 2600/2700 series all-in-one HP Photosmart 2600/2700 series all-in-one User Guide User Guide USB cable* HP PSC 1500 All-in-One series Setup Guide print cartridges power cord and adapter * Purchased separately. The contents of your box may differ.
CAUTION: The control panel overlay must be attached for the HP All-in-One to work! Connect the power cord and adapter 2 • HP All-in-One b Remove the bottom tab and the backing from the overlay.
Lower the access door until it stops. Make sure the print carriage moves to the right side. Pull the pink tab to remove the tape from both print cartridges. CAUTION: Do not touch the copper-colored contacts or retape the cartridges. HP All-in-One • 3...
On before you can insert the print cartridge. a Hold the tri-color print cartridge with the blue HP logo on top. b Place the tri-color print cartridge in front of the left slot. c Push the cartridge ﬁ rmly into the slot until it snaps into place.
Align the print cartridges Turn on your computer Choose the correct CD Windows Users: a Insert the HP All-in-One Windows CD. b Follow the onscreen instructions. If the startup screen does not appear, double-click My Computer, double-click the CD-ROM icon, and then double-click setup.exe .
USB cable. Once the prompt appears, connect the USB cable to the port on the back of the HP All-in-One, and then to any USB port on your computer. If you do not see these screens, see Troubleshooting on the next page.
Step 14. Problem: (Windows only) The Microsoft Add Hardware screen appears. Action: Click Cancel . Unplug the USB cable, and then insert the HP All-in-One Windows CD. Refer to Steps 14 and 15. Problem: (Windows only) The Device Setup Has Failed To Complete screen appears.
The Check Paper , Check Print Cartridge , Start Copy areas are ﬂ ashing. Printed on at least 50% total recycled ﬁ ber with at least 10% post-consumer paper. Visit www.hp.com/support for assistance. © Copyright 2005 Hewlett-Packard Development Company, L.P. *Q5888-90232* *Q5888-90232*...