Sign in today to find solutions:

Don't have an account? Sign up

 
HP Deskjet F4400 All-in-One series
Windows Help
Next page ->

Summary of Contents

  • Page 1

    HP Deskjet F4400 All-in-One series Windows Help...

  • Page 2

    HP Deskjet F4400 All-in-One series...

  • Page 4: Table Of Contents

    Contents Get to know the HP All-in-One Printer parts...3 Control panel features...4 Control panel features (HP Deskjet F4424 All-in-One only)...5 Print Print documents...7 Print photos...8 Print envelopes...10 Print on specialty media...11 Print a Web page...17 Scan Scan to a computer...27 Copy Copy text or mixed documents...29...

  • Page 6: Printer Parts

    Paper tray extender (also referred to as the tray extender) Paper stop Cartridges Glass Lid backing 10 Rear access door 11 Rear USB port 12 Power connection (Use only with the power adapter supplied by HP.) 13 Lid 14 Attention light Get to know the HP All-in-One...

  • Page 7: Control Panel Features

    9 Ink Level gauge: Show ink level information for each print cartridge, four indicators for the tri- color cartridge and four indicators for the black cartridge. Also displays a warning for print cartridge problems. Get to know the HP All-in-One...

  • Page 8: Control Panel Features (hp Deskjet F4424 All-in-one Only)

    Control panel features (HP Deskjet F4424 All-in-One only) 1 On: Turns the product on or off. When the product is off, a minimal amount of power is still used. To completely remove power, turn off the product, then unplug the power cord.

  • Page 9

    Chapter 1 Get to know the HP All-in-One...

  • Page 10

    Print Choose a print job to continue. “Print documents” on page 7 “Print photos” on page 8 “Print envelopes” on page 10 “Print on specialty media” on page 11 “Print a Web page” on page 17 Related topics • “Load media” on page 23 •...

  • Page 11: Print Photos

    Chapter 2 Select the appropriate options for your print job by using the features available in the Advanced, Printing Shortcuts, Features, and Color tabs. TIP: You can easily select the appropriate options for your print job by choosing one of the predefined print tasks on the Printing Shortcuts tab. Click a type of print task in the Printing Shortcuts list.

  • Page 12

    In the Resizing Options area, click the appropriate paper size from the Size list. If the paper size and paper type are not compatible, the product software displays an alert and allows you to select a different type or size. In the Basic Options area, select a high print quality, such as Best, from the Print Quality drop-down list.

  • Page 13: Print Envelopes

    • “Stop the current job” on page 99 Print envelopes You can load one or more envelopes into the input tray of the HP All-in-One. Do not use shiny or embossed envelopes or envelopes that have clasps or windows. NOTE: For specific details on how to format text for printing on envelopes, consult the help files in your word processing software.

  • Page 14: Print On Specialty Media

    Click the Features tab, and then select the following print settings: • Paper Type: Plain paper • Size: An appropriate envelope size Select any other print settings that you want, and then click OK. Related topics • “Load media” on page 23 •...

  • Page 15

    Chapter 2 Push the cards into the printer until they stop. Slide the paper guide firmly against the edge of the cards. Open the Printer Properties dialog box. Click the Features tab, and then specify the following print settings: • Paper Type: Click More, click Specialty Papers, and then select an appropriate card type.

  • Page 16

    Open the Printer Properties dialog box. Click the Features tab. Specify the following print settings: • Print Quality: Best • Paper Type: Click More, and then select an appropriate HP inkjet paper. • Orientation: Portrait or Landscape • Size: An appropriate paper size •...

  • Page 17

    Chapter 2 Click the Features tab, and then specify the following print settings: • Print Quality: Normal • Paper Type: Click More, and then select an appropriate card type. • Size: An appropriate card size Select any other print settings that you want, and then click OK. Print booklets Slide the paper guide all the way to the left.

  • Page 18

    Print posters Slide the paper guide all the way to the left. Place plain paper in the right side of the tray. The side to be printed on should face down. Push the paper into the printer until it stops. Slide the paper guide firmly against the edge of the paper.

  • Page 19

    Chapter 2 Print iron-on transfers Slide the paper guide all the way to the left. Place the iron-on transfer paper in the right side of the tray. The side to be printed on should face down. Push the paper into the printer until it stops. Slide the paper guide firmly against the edge of the paper.

  • Page 20: Print A Web Page

    You can print a Web page from your Web browser on the HP All-in-One. If you use Internet Explorer 6.0 or higher for Web browsing, you can use HP Smart Web Printing to ensure simple, predictable web printing with control over what you want and how you want it printed.

  • Page 21

    Chapter 2 • HP Advanced Photo Paper • Photo Hagaki Printing in maximum dpi takes longer than printing with other settings and requires a large amount of disk space. To print in Maximum dpi mode Make sure you have paper loaded in the input tray.

  • Page 22

    • Photo Printing–Borderless: Print to the top, bottom, and side edges of 10 x 15 cm (4 x 6 inch) and 13 x 18 cm (5 x 7 inch) HP Photo Papers. • Paper-saving Printing: Print two-sided documents with mutliple pages on same sheet to reduce paper usage.

  • Page 23

    Print dialog box from within your software application. To change the default print settings In the HP Solution Center, click Settings, point to Print Settings, and then click Printer Settings. Make changes to the print settings, and click OK.

  • Page 24

    Paper basics You can load many different types and sizes of paper in the HP All-in-One, including letter or A4 paper, photo paper, transparencies, and envelopes. This section contains the following topics: “Load media” on page 23 Recommended papers for printing If you want the best print quality, HP recommends using HP papers that are specifically designed for the type of project you are printing.

  • Page 25

    It is acid-free for longer lasting documents. HP Iron-On Transfers HP Iron-on Transfers (for color fabrics or for light or white fabrics) are the ideal solution for creating custom T-shirts from your digital photos.

  • Page 26

    Load media ▲ Select a paper size to continue. Load small-size paper a. Slide paper-width guide to the left. Slide paper-width guide to the left. b. Load paper. Insert stack of photo paper into photo tray with short edge forward and print side down.

  • Page 27

    Chapter 3 b. Load paper. Insert stack of paper into input tray with short edge forward and print side down. Slide stack of paper forward until it stops. Slide paper-width guide to the right until it stops at edge of paper. Load envelopes a.

  • Page 28

    Remove all paper from the main input tray. b. Load envelopes. Insert one or more envelopes into far-right side of the input tray, with envelope flaps on left and facing up. Slide stack of envelopes forward until it stops. Slide paper-width guide to the right against stack of envelopes until it stops. Load media...

  • Page 29

    Chapter 3 Paper basics...

  • Page 30

    Scan • Scan to a computer. Scan to a computer. ▲ Do the following: Single page scan a. Load original. Lift lid on product. Load original print side down on right front corner of glass. Close lid. Scan...

  • Page 31

    Chapter 4 b. Start scan. Press Scan. c. Preview and accept. Preview the scanned image and accept. Related topics “Stop the current job” on page 99 Scan...

  • Page 32

    Copy NOTE: If you have the HP Deskjet F4424 All-in-One (refer to the product control panel for the model number), see on page 33 to learn about that product's copy features. “Copy text or mixed documents” on page 29 Copy text or mixed documents ▲...

  • Page 33: Set The Copy Paper Type

    Copier paper or letterhead HP Bright White Paper HP Advanced Photo Paper, Glossy HP Advanced Photo Paper, Matte HP Advanced 4 x 6 inch Photo Paper HP Photo Paper HP Everyday Photo Paper HP Everyday Photo Paper, Semi Gloss Copy...

  • Page 34

    (continued) Paper type Other photo paper HP Advanced Paper HP All-in-One Paper HP Printing Paper Other inkjet paper Legal Related topics “Paper basics” on page 21 Control panel setting Photo Plain Plain Plain Plain Plain Set the copy paper type...

  • Page 35

    Chapter 5 Copy...

  • Page 36

    HP Photosmart Software must also be installed and running on your computer prior to copying. To verify that the HP Photosmart Software is running on a Windows computer, look for the HP Digital Imaging Monitor icon in the system tray at the lower right side of the screen, near the time.

  • Page 37

    Load original print side down on right front corner of glass. Close lid. c. Select number of copies. Press Number of Copies to change the number of copies. d. Start copy. Press Start PC Copy Black or Start PC Copy Color. Copy (HP Deskjet F4424 All-in-One only)

  • Page 38

    Related topics • “Set the copy paper type” on page 30 • “Stop the current job” on page 99 Copy text or mixed documents...

  • Page 39

    Chapter 6 Copy (HP Deskjet F4424 All-in-One only)

  • Page 40

    In addition, some residual ink is left in the cartridge after it is used. For more information, see www.hp.com/go/inkusage. To check the ink levels from the HP Photosmart Software In the HP Solution Center, click Settings, point to Print Settings, and then click Printer Toolbox. NOTE: You can also open the Printer Toolbox from the Print Properties dialog box.

  • Page 41: Order Ink Supplies

    Chapter 7 Order ink supplies For a list of cartridge numbers, use the software that came with the HP All-in-One to find out the reorder number. Find the cartridge number In the HP Solution Center, click Settings, point to Print Settings, and then click Printer Toolbox.

  • Page 42: Automatically Clean Print Cartridges, Manually Clean Print Cartridges

    NOTE: Do not remove both print cartridges at the same time. Remove and clean each print cartridge one at a time. Do not leave a print cartridge outside the HP All-in-One for more than 30 minutes. “Manually clean print cartridges” on page Do not use platen cleaners or alcohol to clean the print cartridge “Check the estimated...

  • Page 43: Replace The Cartridges

    1 Copper-colored contacts 2 Ink nozzles (do not clean) Hold the print cartridge with the HP logo on top, and insert the print cartridge back into the slot. Make sure you push the print cartridge in firmly until it snaps into place.

  • Page 44

    Wait for print carriage to move to center of the product. b. Press down to release cartridge, then remove it from slot. Insert new cartridge. a. Remove cartridge from packaging. b. Remove plastic tape using pink pull tab. Replace the cartridges...

  • Page 45: Cartridge Warranty Information

    During the warranty period the product is covered as long as the HP ink is not depleted and the end of warranty date has not been reached. The end of warranty date, in YYYY/...

  • Page 46

    For a copy of the HP Limited Warranty Statement, see the printed documentation that came with the product. Cartridge warranty information...

  • Page 47

    Chapter 7 Work with cartridges...

  • Page 48

    If you have a problem, follow these steps: Check the documentation that came with the product. Visit the HP online support Web site at www.hp.com/support. HP online support is available to all HP customers. It is the fastest source for up-to-date product information and expert assistance and includes the following features: •...

  • Page 49

    (including Mexico). To determine the duration of phone support in Europe, the Middle East, and Africa, go to www.hp.com/support. Standard phone company charges apply. Placing a call Call HP support while you are in front of the computer and the product. Be prepared to provide the following information: •...

  • Page 50

    After the phone support period After the phone support period, help is available from HP at an additional cost. Help may also be available at the HP online support Web site: www.hp.com/support. Contact your HP dealer or call the support phone number for your country/region to learn more about support options.

  • Page 51: Setup Troubleshooting

    This section contains the following topics: • The product will not turn on • I connected the USB cable, but I am having problems using the HP All-in-One with my computer • After setting up the product, it does not print •...

  • Page 52

    If the product still does not turn on, it might have a mechanical failure. Unplug the product from the power outlet. Contact HP support for service. Go to: www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. Setup troubleshooting...

  • Page 53

    Chapter 8 Cause: You pressed the On button too quickly. I connected the USB cable, but I am having problems using the HP All-in-One with my computer Solution: You must first install the software that came with the product before connecting the USB cable.

  • Page 54

    to the product and plugged into a power outlet. Press the On button to turn on the product. Cause: The product might not have been turned on. If this did not solve the issue, try the next solution. Solution 2: Set your product as the default printer Solution: Use the system tools on your computer to change your product to be the default printer.

  • Page 55

    Chapter 8 A red X appears on the USB connect prompt Solution: Verify that the product is set up properly, and then try to re-establish the connection. To retry the USB connection Verify that the USB cable is set up properly as follows: •...

  • Page 56

    Do not simply delete the HP All-in-One application files from your computer. Make sure to remove them properly using the uninstall utility provided when you installed the software that came with the HP All-in-One.

  • Page 57: Print Quality Troubleshooting

    Chapter 8 To verify that the software is properly installed, double-click the HP Solution Center icon on the desktop. If the HP Solution Center shows the essential icons (Scan Picture and Scan Document), the software has been properly installed. Print quality troubleshooting Use this section to solve these print quality problems: •...

  • Page 58

    NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs required as a result of using a non-HP supply will not be covered under warranty. If you believe you purchased genuine HP ink cartridges, go to: www.hp.com/go/anticounterfeit...

  • Page 59

    You might need to choose a lower print quality setting, if colors are running into each other. Or, choose a higher setting if you are printing a high-quality photo, and then make sure photo paper such as HP Advanced Photo Paper, is loaded in the input tray.

  • Page 60

    Solution: Check to see if your ink cartridges are genuine HP ink cartridges. HP recommends that you use genuine HP ink cartridges. Genuine HP ink cartridges are designed and tested with HP printers to help you easily produce great results, time after time.

  • Page 61

    NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs required as a result of using a non-HP supply will not be covered under warranty. If you believe you purchased genuine HP ink cartridges, go to: www.hp.com/go/anticounterfeit...

  • Page 62

    Solution 3: Rotate the image Solution 1: Check the paper type Solution: HP recommends that you use HP papers or any other paper type that is appropriate for the product. Always make sure the paper you are printing on is flat. For best results when printing images, use HP Advanced Photo Paper.

  • Page 63

    Try the following solutions if your printout has lines, streaks, or marks on it that run across the width of the page. • Solution 1: Make sure you are using genuine HP ink cartridges • Solution 2: Check the ink levels •...

  • Page 64

    NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs required as a result of using a non-HP supply will not be covered under warranty. If you believe you purchased genuine HP ink cartridges, go to: www.hp.com/go/anticounterfeit...

  • Page 65

    Solution: Align the printer. Aligning the printer can help ensure excellent print quality. To align the printer from the HP Photosmart Software Load letter, A4, or legal unused plain white paper into the input tray. In the HP Solution Center, click Settings.

  • Page 66

    NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs required as a result of using a non-HP supply will not be covered under warranty. If you believe you purchased genuine HP ink cartridges, go to: www.hp.com/go/anticounterfeit...

  • Page 67

    If this did not solve the issue, try the next solution. Solution 4: Check the paper type Solution: HP recommends that you use HP papers or any other paper type that is appropriate for the product. Always make sure the paper you are printing on is flat. For best results when printing images, use HP Advanced Photo Paper.

  • Page 68

    For this issue, there is not a problem with your ink supplies. Therefore, replacing the ink cartridges or printhead is not necessary. TIP: After reviewing the solutions in this section, you can go to HP's Web site to see if there is additional troubleshooting help. For more information, go to: support.

  • Page 69

    Cause: The printer needed to be aligned. Printouts have vertical streaks Solution: HP recommends that you use HP papers or any other paper type that is appropriate for the product. Always make sure the paper you are printing on is flat. For best results when printing images, use HP Advanced Photo Paper.

  • Page 70

    plan to use immediately. When you have finished printing, return any unused photo paper to the plastic bag. This will prevent the photo paper from curling. For more information, see: • “Load media” on page 23 • “Paper basics” on page 21 Cause: The wrong kind of paper was loaded in the input tray.

  • Page 71

    Chapter 8 Print a document with little or no text. Check the back of the paper for ink. If there is still ink on the back of the paper, try printing on another page of plain paper. Cause: Ink accumulated inside the product, where the back of the paper rests during printing.

  • Page 72: Print Troubleshooting

    Aligning the printer can help ensure excellent print quality. To align the printer from the HP Photosmart Software Load letter, A4, or legal unused plain white paper into the input tray. In the HP Solution Center, click Settings. In the Print Settings area, click Printer Toolbox.

  • Page 73

    Chapter 8 For more information, see: “Load media” on page 23 Cause: A stack of envelopes was loaded incorrectly. If this did not solve the issue, try the next solution. Solution 2: Load a different type of envelope Solution: Do not use shiny or embossed envelopes or envelopes that have clasps or windows.

  • Page 74

    Solution 2: Try printing another document Solution: Try printing another document from the same software application. If this works, then try printing a previously saved version of the document that is not corrupt. Cause: The document was corrupt. The pages in my document came out in the wrong order Solution: Print the document in reverse order.

  • Page 75

    Chapter 8 Solution 2: Verify the paper size setting Solution: Verify that you have selected the proper paper size setting for your project. Make sure that you have loaded the correct paper size in the input tray. Cause: The paper size setting was not set correctly for the project you were printing. If this did not solve the issue, try the next solution.

  • Page 76

    • Solution 2: Check for blank pages at the end of the document • Solution 3: Load more paper in the input tray • Solution 4: Check the print cartridges for protective tape Solution 1: Check the ink levels in the print cartridges Solution: Check the estimated ink levels remaining in the print cartridges.

  • Page 77: Scan Troubleshooting

    Chapter 8 1 Copper-colored contacts 2 Plastic tape with pink pull tab (must be removed before installing) 3 Ink nozzles under tape For more information, see: “Replace the cartridges” on page 40 Cause: The protective plastic tape was only partially removed from the print cartridge.

  • Page 78

    Cause: The original was placed incorrectly on the glass. Scanned image is incorrectly cropped Solution: The autocropping feature in the software crops anything that is not part of the main image. Sometimes this might not be what you want. In that case, turn off autocropping in the software and crop the scanned image manually, or not at all.

  • Page 79: Copy Troubleshooting

    Solution 1: Make sure that the brightness is set appropriately in the software Solution: Adjust the brightness in the software, and then rescan the original. To adjust the brightness In the HP Scanning window, click Lighten/Darken in the Basic menu or the Tools panel. Adjust the brightness indicators.

  • Page 80

    • Solution 4: The product does not support the paper or envelope • Solution 5: Check for a paper jam Solution 1: Turn on the product Solution: Look at the On button located on the product. If it is not lit, the product is turned off.

  • Page 81

    Chapter 8 If this did not solve the issue, try the next solution. Solution 5: Check for a paper jam Solution: Clear the paper jam. Cause: The product had a paper jam. Parts of the original do not appear or are cut off Try the following solutions to resolve the issue.

  • Page 82

    can cause the product to detect only a portion of the image. Turn off the product, unplug the power cord, and use a soft cloth to wipe the glass and the back of the document lid. Cause: The product detected only a portion of the image due to dust or debris on the glass.

  • Page 83: Errors

    Turn off the product, and then turn it on again. If the problem persists, contact HP customer support. In the meantime, you can continue to use the product as a printer.

  • Page 84

    On light Description Solution Fast The product has a blinking fatal error. If the problem persists, contact HP Support. Fast Scan was pressed, Make sure the blink for and there was no computer is turned response from the on, the product seconds computer.

  • Page 85

    • Memory is full Firmware revision mismatch Solution: To find support and warranty information, go to the HP Web site at www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. Cause: The revision number of the product firmware does not match the revision number of the software.

  • Page 86

    GIF, JPG, PCD, PCX, TIF, PICT, PSD, PCS, EPS, TGA, SGI, PDF, and PNG • When scanning, the HP Photosmart Software enables you to save an image in the following file formats: BMP, DCX, FPX, GIF, JPG, PCD, PCX, and TIF...

  • Page 87

    No scan options Solution: Make sure the software is installed and running. For more information, see the Start Here guide that came with the HP All-in-One. Cause: The software that came with the product was not running, or has never been installed.

  • Page 88

    Print cartridge messages The following is a list of print cartridge error messages: • Non-HP cartridges installed • Previously used genuine HP cartridges installed • Original HP ink has been depleted • Low on ink •...

  • Page 89

    NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Printer service or repairs required as a result of using of a non-HP supply will not be covered under warranty. If you believe you purchased genuine HP print cartridges, go to: www.hp.com/go/anticounterfeit...

  • Page 90

    Cause: The original HP ink in the indicated print cartridges was depleted. Low on ink Solution: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the print cartridges until print quality becomes unacceptable.

  • Page 91

    Chapter 8 Incorrectly Installed Cartridge(s) Print Cartridge(s) Missing Print cartridges missing or not detected Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

  • Page 92

    Do not remove both print cartridges at the same time. Remove and clean each print cartridge one at a time. Do not leave a print cartridge outside the HP All-in-One for more than 30 minutes. Inspect the print cartridge contacts for ink and debris buildup.

  • Page 93

    1 Copper-colored contacts 2 Ink nozzles (do not clean) Hold the print cartridge with the HP logo on top, and insert the print cartridge back into the slot. Make sure you push the print cartridge in firmly until it snaps into place.

  • Page 94

    If the end of warranty date has been reached, purchase a new print cartridge. • If the end of warranty date has not been reached, contact HP support. Go to www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.

  • Page 95

    Chapter 8 Print cartridges in wrong slot Solution: Make sure the print cartridges are installed into the correct slots. If they are, remove and reinsert the print cartridges and verify that they are fully inserted and locked in place. To make sure the print cartridges are installed correctly Make sure the product is turned on.

  • Page 96

    If the print cartridges are installed in the wrong slots and you cannot remove them from the product, contact HP support for service. Go to: www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. Cause: The indicated print cartridges were installed incorrectly.

  • Page 97

    Chapter 8 Remove the black print cartridge from the slot on the right. Press down on the cartridge to release it, and then pull it toward you out of the slot. 1 Tri-color print cartridge 2 Black print cartridge Close the print cartridge door. Check to see if the error has been resolved.

  • Page 98

    • Solution 1: Remove and reinsert the print cartridges • Solution 2: Clean the print cartridge contacts • Solution 3: Replace the print cartridges Solution 1: Remove and reinsert the print cartridges Solution: Remove and reinsert the print cartridges and verify that they are fully inserted and locked in place.

  • Page 99

    Do not remove both print cartridges at the same time. Remove and clean each print cartridge one at a time. Do not leave a print cartridge outside the HP All-in-One for more than 30 minutes. Inspect the print cartridge contacts for ink and debris buildup.

  • Page 100

    1 Copper-colored contacts 2 Ink nozzles (do not clean) Hold the print cartridge with the HP logo on top, and insert the print cartridge back into the slot. Make sure you push the print cartridge in firmly until it snaps into place.

  • Page 101

    Chapter 8 Solve a problem...

  • Page 102

    Stop the current job To stop a print job from the HP All-in-One ▲ Press Cancel on the control panel. If the print job does not stop, press Cancel again. It can take a few moments for printing to be cancelled.

  • Page 103

    Chapter 9 Stop the current job...

  • Page 104

    In the presence of high electromagnetic fields, it is possible the output from the HP All-in-One may be slightly distorted • HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise due to potential high electromagnetic fields Paper tray capacity Plain paper sheets (75 g/m²...

  • Page 105: Environmental Product Stewardship Program

    Cartridge yield Visit www.hp.com/go/learnaboutsupplies Acoustic information If you have Internet access, you can get acoustic information from the HP Web site. Go to: www.hp.com/support. Environmental product stewardship program Hewlett-Packard is committed to providing quality products in an environmentally sound manner.

  • Page 106

    Eco-Tips below to help you focus on ways to assess and reduce the impact of your printing choices. In addition to specific features in this product, please visit the HP Eco Solutions web site for more information on HP’s environmental initiatives.

  • Page 107

    Disposal of waste equipment by users in private households in the European Union Chemical Substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No...

  • Page 108: Regulatory Notices

    For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is SNPRH-0801. This regulatory number should not be confused with the marketing name (HP Deskjet F4400 All-in-One series, etc.) or product numbers (CB 745A-D, etc.).

  • Page 109

    Chapter 10 FCC statement • • • • Notice to users in Korea VCCI (Class B) compliance statement for users in Japan Technical information...

  • Page 110

    Regulatory Model Number is the main product identifier in the regulatory documentation and test reports, this number should not be confused with the marketing name or the product numbers. 19 Aug 2008 EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany www.hp.com/go/certificates U.S.: Hewlett –Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501...

  • Page 111

    Chapter 10 Technical information...

  • Page 112

    Index after the support period 47 blank copy 79 scan 74 border 78 color dull 63 connection problems HP All-in-One will not turn on 48 copy blank 79 missing information 78 paper types, recommended 30 specifications 102 troubleshooting 76 crop...

  • Page 113

    uninstall 53 start copy black 4, 5 color 4, 5 support process 45 system requirements 101 technical information copy specifications 102 environmental specifications 101 print specifications 102 scan specifications 102 system requirements 101 text dotted lines on scan 75 incorrect format on scan 75 incorrect or missing on scan 76 jagged 68...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: