Graco lower anchorage belt system manual (36 pages)
Summary of Contents for Graco HUSKY 716
Page 1
Parts INSTRUCTIONS–PARTS LIST See instruction manual 308981 for important warnings and information. READ AND KEEP FOR REFERENCE. INSTRUCTIONS METAL For converting Huskyt 716 Air Motor Retrofit Kits Part No. 241631 with standard air motor Part No. 241664 with remote-operated air motor GRACO INC.
Page 2
Pressure Relief Procedure WARNING PRESSURIZED EQUIPMENT HAZARD The equipment stays pressurized until pressure is manually relieved. To reduce the risk of serious injury from pressurized fluid, accidental spray, or splashing fluid, follow this procedure whenever you D Are instructed to relieve pressure D Stop pumping D Check, clean, or service any system equipment D Install or clean fluid nozzles...
Page 3
Husky 716 Air Motor Retrofit Kit Part No. 241631, with standard air motor Part No. 241664, with remote-operated air motor Ref. Part No. Description 240224 MOTOR, air, standard Included in Kit 241631 See manual 308981 for parts. 241255 MOTOR, air, remote-operated Included in Kit 241664 See manual 308981 for parts.
Page 4
Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.