1. Manuals
  2. Brands
  3. Central Pneumatic Manuals
  4. Tools
  5. 61244
  6. Owner's manual & safety instructions

Central Pneumatic 61244 Owner's Manual & Safety Instructions

Medium barrel air hammer with chise
Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
medium barrel air hammer
with chisel
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2013 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Because
of continuing improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 61244

Advertisement

Table of Contents
loading

Related Manuals for Central Pneumatic 61244

Summary of Contents for Central Pneumatic 61244

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Because SAVE THIS MANUAL.

  • Page 2: Table Of Contents

    2. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or fumes. Page 2 For technical questions, please call 1-800-444-3353. Item 61244...

  • Page 3: Personal Safety

    3. Use only the lubricants supplied with the by qualified repair personnel. tool or specified by the manufacturer. 2. When servicing a tool, use only identical replacement parts. Use only authorized parts. Item 61244 For technical questions, please call 1-800-444-3353. Page 3...

  • Page 4: Air Source

    WARNING marking concerning Cubic Feet per Minute flow Risk of Respiratory Injury. Wear NIOSH-approved dust mask/respirator. Cubic Feet per Minute flow SCFM at standard conditions WARNING marking concerning Risk of Explosion. Page 4 For technical questions, please call 1-800-444-3353. Item 61244...

  • Page 5: Specific Safety Instructions

    7. To reduce vibration, maintain seek medical advice as soon as possible. tool as explained in this manual. If abnormal vibration occurs, stop immediately. SAVE THESE INSTRUCTIONS. Item 61244 For technical questions, please call 1-800-444-3353. Page 5...

  • Page 6: Specifications

    90 PSI Air Inlet 1/4″ -18 NPT Maximum Speed 3,000 BPM Average Air Consumption 4 CFM @ 90 PSI Shank Capacity 0.401″ Components and Controls Cylinder Spring Chisel Trigger Regulator Air Inlet Page 6 For technical questions, please call 1-800-444-3353. Item 61244...

  • Page 7: Setup

    The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. Item 61244 For technical questions, please call 1-800-444-3353. Page 7...
  • Page 8 Page 8 For technical questions, please call 1-800-444-3353. Item 61244...
  • Page 9 Item 61244 For technical questions, please call 1-800-444-3353. Page 9...
  • Page 10 Note: The collar on the chisel must go under the spring to keep it from falling out. Figure D: Chisel Installation To twist the Spring on, twist from the hook at the front. Page 10 For technical questions, please call 1-800-444-3353. Item 61244...

  • Page 11: General

    Clean external surfaces of the tool with clean, dry cloth, and apply a thin coat of tool oil. Then store the tool indoors out of children's reach. Item 61244 For technical questions, please call 1-800-444-3353. Page 11...

  • Page 12: Maintenance

    •  any other condition that may 3. Quarterly (every 3 months) – affect its safe operation. Tool Disassembly, Cleaning, and Inspection: Have the internal mechanism cleaned, inspected, and lubricated by a qualified technician. Page 12 For technical questions, please call 1-800-444-3353. Item 61244...

  • Page 13: Troubleshooting

    Disconnect air supply before service. Accessory List Item/Part* Description 68276 3 Piece Long Air Chisel Set 68277 4 Piece Short Air Chisel Set *Item or part number may not be available for some accessories. Item 61244 For technical questions, please call 1-800-444-3353. Page 13...
  • Page 14 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-800-444-3353. Item 61244...

  • Page 15: Parts List And Assembly Diagram

    Parts List and Assembly Diagram Part Description Part Description Housing O-ring Plug Regulator Bushing Cylinder Ball Bearing Plunger Spring Valve Air Inlet Spring Trigger Chisel (not shown) Item 61244 For technical questions, please call 1-800-444-3353. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents