Page 1: Table Of Contents
Technical data Switching the appliance on for the first time Selecting the language Child safety lock Description of the appliance, 8 Overall view FDUD 43133 ULTIMA Control panel Loading the racks, 9-10 Lower rack Cutlery basket Upper rack Adjusting the upper rack...
Page 2: Product Fiche
Product fiche Product Fiche HOTPOINT Brand FDUD 43133P - FDUD 43133X Model Rated capacity in standard place settings (1) Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) A+++ Energy consumption per year in kWh (2) 237.0...
Page 3: Precautions And Safety Advice
Precautions and safety advice • The packaging material should not be used as a toy: The appliance was designed and manufactured in it can become a choking or suffocation hazard. compliance with current international safety standards. The following information has been provided for safety If your family includes children: reasons and should therefore be read carefully.
Page 4: Recycling & Disposal Information
Recycling & Disposal Information As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use quality recycled components to keep down customer costs and minimise material wastage. Please dispose of packaging and old appliances carefully.
Page 5: Positioning And Levelling
‘L’ from the use of non-original spare parts. Electrical Connection Changing the Mains Lead Before inserting the plug into the electrical socket, make sure A lead can be ordered from Hotpoint Service that: UK: 08709 066 066 or Republic of Ireland: 1850 302 220 • the socket is earthed and complies with current regulations; - If you have damaged the existing lead or require a longer one • the socket can withstand the maximum load of the appliance,...
Page 6: Installation, 5
The Company shall not be held responsible for any If the inlet hose is not long enough, contact a specialist incidents that occur if these regulations are not observed. (see Assistance) store or an authorised technician The water pressure must be within the values indicated Anti-condensation strip (see Installation).
Page 7: Switching The Appliance On For The First Time
• If fitting an under sink waste The control panel features a “Touch Control” system disposal unit, cut out the membrane, press the symbols lightly with your fingertips to activate bung or blanking plug. the command. (depending on the The machine has a buzzer/set of tones dishwasher model ) to inform the user that a command has...
Page 8: Description Of The Appliance
Description of the appliance Overall view Upper rack Upper sprayer arm Tip-up dispensers Rack height adjuster Lower rack Lower sprayer arm Washing filter Salt dispenser Detergent and rinse-aid dispensers and device Active Oxigen Data plate **** Control panel Turbo Dry Control Panel Extra Drying option button Multi-functional SETTINGS button Tablets button Select wash On-Off/Reset Key lock button cycle arrows button and Start/Pause button...
Page 9: Loading The Racks
Loading the racks Tips Several dishwasher models are fitted with tip-up sectors Before loading the racks, remove all food residues from the They can be used in a vertical position when arranging dishes crockery and empty liquids from glasses and containers. No or in a horizontal position (lower) to load pans and salad bowls preventive rinsing is needed under running water.
Page 10: Upper Rack
The upper rack can be adjusted for height based on requirements: Tip-up compartments with adjustable position high position to place bulky crockery in the lower rack and low The side tip-up compartments can be positioned at three position to make the most of the tip-up compartments/sectors different heights to optimize the arrangement of crockery inside by creating more space upwards.
Page 11: Start-Up And Use
Start-up and use Starting the dishwasher Measuring out the detergent A good wash result also depends on the correct 1. Turn the water tap on. amount of detergent being used. Exceeding the stated 2. Press the ON/OFF button: The ON/OFF indicator light and amount does not result in a more effective wash and the display light up. increases environmental pollution.
Page 12: Wash Cycles
Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Water Energy Wash cycles Duration of Wash cycle Options consumption consumption...
Page 13: Special Wash Cycles And Options
Special wash cycles and Options Notes: Zone Wash Optimum performance levels when using the “Fast wash” This option makes it possible to carry out the wash and “Express 30’” cycles can be achieved by respecting the cycle in the selected rack only. Select the wash specified number of place settings. cycle and then press the ZONE WASH button: the selected rack lights up and the wash cycle starts in the selected rack To reduce consumption, only run the dishwasher when it is full.
Page 14: Rinse Aid And Refined Salt
Rinse aid and refined salt This dishwasher offers a setting which helps to reduce pollution Only use products which have been specifically designed and optimises washing performance in accordance with the for dishwashers. water hardness level in your area. This information can be Do not use table/industrial salt or washing-up liquid.
Page 15: Care And Maintenance
Care and maintenance Shutting off the water and electricity Cleaning the filters supplies The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. • Turn off the water tap after every wash cycle to avoid leaks. They should be cleaned if you wish to achieve the best results • Always unplug the appliance when cleaning it and when in every wash.
Page 16: Troubleshooting
Troubleshooting Whenever the appliance fails to work properly, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start or cannot • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the cycle. be controlled. • The appliance has not been plugged in properly. •...
Page 17: After-Sales Service
After Sales Service After Sales Service Appliance Registration No one is better placed to care for your Hotpoint We want to give you additional benefits of Hotpoint appliance during the course of its working life than ownership. To activate your free 5 year parts guarantee us - the manufacturer.
Page 18: Guarantee
5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.
Page 20 195108371.03 03/2013 pb - Xerox Fabriano...

Hotpoint FDUD 43133 ULTIMA Instructions For Use Manual

Quick Links

Instructions for use

Related Manuals for Hotpoint FDUD 43133 ULTIMA

Summary of Contents for Hotpoint FDUD 43133 ULTIMA

Table of Contents