Page of 18

MicroBoards Technology PF-Pro Disc Printer User Manual: Printing Specifications; Technical Support

Pf-pro disc printer.

Printing Specifications

Print Speed: Depends upon percentage
of coverage and print mode selected:
Approx. 45 seconds for 100% full-
color coverage, Photo Normal Mode
Approx. 20 seconds for 100% full-
color coverage, Text & Graphics
Best Mode
coverage Text & Graphics Normal
Ink Cartridges:
Yellow and Black: CG316A
Cyan and Magenta: C9382A
Media Types:
Printable-surface 120mm CD-R or DVD-R
Technical Support
For technical questions or support issues, contact Microboards Technology technical support:
United States
PH: 952-556-1639
FAX: 952-556-1628
Please have the Model and Serial Number of your PF-Pro Disc Printer available when contacting
Technical Support.
Any unauthorized modification to this equipment may result in the revocation by the FCC of the user's authority to
operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and antenna
Connect the equipment into an outlet on a circuit different than that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following European standards:
EN 55022, EN 55024. The CE mark has been affixed in accordance with the CE Marking Directive 93/68/EEC.
Canadian Department of Communications (DOC) Statement
This Class B digital apparatus complies with the Canadian ICES-003 Issue 4:2004. Cet appareil numerique de la classe B est conforme a la
norme NMB-003 du Canade.
• Technical Support
PH: +44 (0) 845 230 7800
Maximum Print Width:
4.72" (120mm)
Power Supply:
Auto Detect AC Power:
90VAC – 240VAC, 47Hz – 63Hz
One Year Limited Warranty
Print Technology:
HP Inkjet
Print Quality, Black: 600 x 600 dpi
Print Quality, Color: up to 4800 x 1200
optimized dpi
32 MB
USB 2.0 required
PH: 03-3561-2266

   Related Manuals for MicroBoards Technology PF-Pro Disc Printer

   Related Content for MicroBoards Technology PF-Pro Disc Printer

Comments to this Manuals

Symbols: 0
Latest comments: