Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. REV 09/04 For technical questions, please call 1-800-444-3353. SKU 91938 Page 2...
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. For technical questions, please call 1-800-444-3353. SKU 91938 Page 3...
Page 4
Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly main- tained tools. For technical questions, please call 1-800-444-3353. SKU 91938 Page 4...
SPECIFIC SAFETY RULES Maintain labels and nameplates on the Cut-Off Saw. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replace ment Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace.
Page 6
Make sure the Cut-Off Wheel is balanced and is not broken or bent. Always unplug the Cut-Off Saw from its electrical outlet before perform- ing any inspection, maintenance, or cleaning procedures. For technical questions, please call 1-800-444-3353. SKU 91938 Page 6...
Page 7
WARNING! People with pacemakers should consult their physician(s) be- fore using this product. Electromagnetic fields in close proximity to a heart pace- maker could cause interference to or failure of the pacemaker. For technical questions, please call 1-800-444-3353. SKU 91938 Page 7...
Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.) FIGURE A For technical questions, please call 1-800-444-3353. SKU 91938 Page 8...
If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure C.) For technical questions, please call 1-800-444-3353. SKU 91938 Page 9...
Page 10
FIGURE C to five volts at 150% of the rated amperes. SYMBOLOGY Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes No Load Revolutions xxxx/min. per Minute (RPM) For technical questions, please call 1-800-444-3353. SKU 91938 Page 10...
Page 11
When unpacking, check to make sure all the parts shown on the Parts List on page 15 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Page 12
Angle Scale at the upper two screw holes. See FIGURE 4. FIGURE 4 FIGURE 5 Place Workpiece Here Quick Upper Two Screw Holes Release (31) Screws (41 & 44) Angle Scale Vise Handle (28) (35) For technical questions, please call 1-800-444-3353. SKU 91938 Page 12...
Page 13
Base (13). If it does contact any part of the Base (13), re- adjust the depth so it doesn’t. Repeat the cutting process starting with number 1 above. For technical questions, please call 1-800-444-3353. SKU 91938 Page 13...
TIGHTEN. Note: New Carbon Brushes (67) tend to arc or spark when first used until they wear and conform to the Motor Armature (85). FIGURE 8 FIGURE 9 Carbon Brush Cover (68) Carbon Brush Cover (68) For technical questions, please call 1-800-444-3353. SKU 91938 Page 14...
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. For technical questions, please call 1-800-444-3353. SKU 91938 Page 15...
ASSEMBLY DIAGRAM Wrench (111) - not shown. NOTE: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. For technical questions, please call 1-800-444-3353. SKU 91938 Page 16...
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.