Memory Module - HP 2000 Maintenance And Service Manual

Memory module

Description
4-GB (PC3, 10600, 1333-MHz)
2-GB (PC3, 10600, 1333-MHz)
1-GB (PC3, 10600, 1333-MHz)
Before removing a memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the memory module/wireless module compartment cover (see
models only) on page
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The memory module tilts up.)
2. Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install a memory module.
Battery on page 39).
40).
Spare part number
621569-001
621565-001
639738-001
Optical drive (select
Component replacement procedures 45