Speakers - HP ENVY 17 Maintenance And Service Manual

Speakers

Description
Speakers (include cable)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the memory module compartment cover (see
6. Remove the top cover (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the speakers (2).
Reverse this procedure to install the speakers.
Battery on page 38).
Top cover on page 53).
Memory module on page
Component replacement procedures
Spare part number
603796-001
43).
69