Memory Module - HP ENVY 17 Maintenance And Service Manual

Memory module

Description
4-GB (PC3, 10600, 1333-MHz)
2-GB (PC3, 10600, 1333-MHz)
Before removing a memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive cover (see
Remove the memory module:
1. Loosen the two captive Phillips screws (1) that secure the memory module compartment cover to
the computer.
2. Pivot the front edge of the memory module compartment cover (2) upward.
3. Remove the memory module compartment cover. The memory module compartment cover is
included in the Plastics Kit, spare part number 603795-001.
NOTE:
module slot contains the primary memory module.
4. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The memory module tilts up.)
Battery on page
The top memory module slot contains the expansion memory module. The memory
38).
Primary hard drive on page
Spare part number
599092-001
598856-001
39).
Component replacement procedures
43