Sony TRINITRON KV-HW21M80 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. TV
  5. FD Trinitron WEGA KV-HW21M80
  6. Service manual

Sony TRINITRON KV-HW21M80 Service Manual

Color tv
Hide thumbs Also See for TRINITRON KV-HW21M80:
Table of Contents

Advertisement

Quick Links

REVISION HISTORY

MODEL
KV-HW21M80
KV-HW21M83
KV-HW21M80J
NO.
SUFFIX
1
-01
2003/11
DATE
SUPP / CORR
_ _
BX1
9-872-408-01
PART NO. :
DESCRIPTION
1st Issue
CHASSIS

Advertisement

Table of Contents
loading

Related Manuals for Sony TRINITRON KV-HW21M80

Summary of Contents for Sony TRINITRON KV-HW21M80

  • Page 1: Revision History

    REVISION HISTORY CHASSIS MODEL 9-872-408-01 PART NO. : KV-HW21M80 KV-HW21M83 KV-HW21M80J SUFFIX DATE SUPP / CORR DESCRIPTION 2003/11 1st Issue...

  • Page 2: Service Manual

    SERVICE MANUAL CHASSIS MODEL COMMANDER DEST. CHASSIS NO. MODEL COMMANDER DEST. CHASSIS NO. KV-HW21M80 RM-W101 Saudi Arabia SCC-V10B-A KV-HW21M83 RM-W101 Saudi Arabia SCC-V10D-A KV-HW21M80J RM-W101 Saudi Arabia SCC-V10H-A (KV-HW21M83) (KV-HW21M80/HW21M80J) TRINITRON COLOR TV ®...

  • Page 3: Table Of Contents

    OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS ANODE. WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. – 2 –...

  • Page 4: Self Diagnostic Function

    KV-HW21M80/HW21M83/HW21M80J RM-W101 SELF DIAGNOSTIC FUNCTION The units in this manual contain a self diagnostic function. If an error occurs, the STANDBY (1) indicator will automatically begin to flash. A description of the self-diagnosis function is explained in the instruction manual. The number of times the STANDBY (1) indicator flashes translates to a probable source of the problem.
  • Page 5 KV-HW21M80/HW21M83/HW21M80J RM-W101 2. DISPLAY OF INDICATOR STANDBY (1) FLASH COUNT Diagnostic Item Flash Count* +B overcurrent 2 times V-Protect 4 times IK (AKB) 5 times Power Supply NG (+5V) 8 times for Video processor * One flash count is not used for self-diagnosis.
  • Page 6 KV-HW21M80/HW21M83/HW21M80J RM-W101 5. HANDLING OF SELF-DIAGNOSTIC SCREEN DISPLAY Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen during repairs. When you have completed the repairs, clear the result display to "0". Unless the result display is cleared to "0", the self-diagnosis function will not be able to detect subsequent faults after completion of the repairs.

  • Page 7: Disassembly

    KV-HW21M80/HW21M83/HW21M80J RM-W101 SECTION 1 DISASSEMBLY 1-1. 3D SPEAKER REMOVAL 1-2. REAR COVER REMOVAL 1 3D Speaker box assy (KV-HW21M83) 1 Eight screws (+BVTP 4 × 16 TYPE 2 IT-3) 2 Rear cover 2 Rear cover 1-4. CHASSIS ASSY REMOVAL 1-3. SPEAKER REMOVAL 1 Two screws (WH DIA.16)

  • Page 8: J Board Removal

    KV-HW21M80/HW21M83/HW21M80J RM-W101 1-7. J BOARD REMOVAL 1-8. A BOARD REMOVAL 1 J Board (KV-HW21M83) Two screws (+BVTP 3x12) A Board 1-9. PICTURE TUBE REMOVAL Note: • Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom right and left.
  • Page 9 KV-HW21M80/HW21M83/HW21M80J RM-W101 • REMOVAL OF ANODE-CAP Note: • After removing the anode, short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the CRT. • REMOVING PROCEDURES anode button turning up the rubber cap and pulling it up in the direction of the arrow C.

  • Page 10: Set-Up Adjustments

    KV-HW21M80/HW21M83/HW21M80J RM-W101 SECTION 2 SET-UP ADJUSTMENTS • The following adjustments should be made when a Perform the adjustments in the following order : complete realignment is required or a new picture 1. Beam Landing tube is installed. 2. Convergence 3. Focus Set the controls as follows unless otherwise noted: 4.

  • Page 11: Convergence

    KV-HW21M80/HW21M83/HW21M80J RM-W101 Operation of V.STAT magnet 2-2. CONVERGENCE If the V.Stat magnet is moved in the “A” and “B” arrows, • Before starting this adjustment, adjust the focus, the red, green and blue dots moves as shown below. horizontal size and vertical size.
  • Page 12 KV-HW21M80/HW21M83/HW21M80J RM-W101 (2) Convergence Rough Adjustment Preparation: • Before starting this adjustment, adjust the horizontal static convergence and the vertical static convergence Insert Correction Plate to DY Pocket ON DY: (Left or Right) YCH Insert YCH VOL on DY Rotate TLV...

  • Page 13: Focus Adjustment

    KV-HW21M80/HW21M83/HW21M80J RM-W101 2-3. FOCUS ADJUSTMENT 2-5. WHITE BALANCE ADJUSTMENT FOCUS adjustment should be completed before the W/B 1. Set to Service Mode (Refer Section 3-1: adjustment: ADJUSTMENTS WITH COMMANDER) 1. Receive digital monoscope pattern. 2. Input white raster signal. 2. Set picture mode: DYNAMIC.

  • Page 14: Circuit Adjustments

    VDSP Detected Stereo Type (Direct Value from CZ_ Stereo_Mode) Needed for Nicam DCXO aligment Purpose S : for Sony A : Aiwa Value of x = 0 - Unknown, 1 - BTSC, 2 - A2, 3 - NICAM, : US/Latin/Taiwan...

  • Page 15: Adjustment Method

    KV-HW21M80/HW21M83/HW21M80J RM-W101 e. OTHER FUNCTION VIA REMOTE COMMANDER 7, - All the data becomes the values in memory. 8, - All user control goes to the standard state. Display, - Service data initialization (Be sure not to use usually.) 2, 5 Select Device or Category 3-2.
  • Page 17 o i t y t i l . t i n t c n n o i e l b & e t o e c i e r d n I / a i t i u l a l i a t ) d e a l S...
  • Page 25 KV-HW21M80/HW21M83/HW21M80J RM-W101 Data Variant depend on models Category Name Model Data WHBL With VM A864 Without VM A864 With VM A865 Without VM A865 With VM A866 Without VM A866 Category Name Model Data With VM A87D Without VM A87D...
  • Page 26 KV-HW21M80/HW21M83/HW21M80J RM-W101 ITEM INFORMATION No. OPB1 Item Speed Search M/N(US) L’ KV-HW21M80 KV-HW21M83 KV-HW21M80J SPEED SEARCH (Time of speed search) 00 = disabled (original cycle speed) 01 = 4 time speed from the original 10 = 6 time speed from the original...
  • Page 27 KV-HW21M80/HW21M83/HW21M80J RM-W101 No. OPB4 Firmware/ Item 1 spk Equalizer V-Chip Text Surround SMAT Models KV-HW21M80 KV-HW21M83 KV-HW21M80J Firmware (SSD Firmware Downloading) 0 = disabled, 1 = enabled SMAT Surround Matrix 0 = Active, 1 = Passive 1 spk Models 1 Speaker Models...
  • Page 28 KV-HW21M80/HW21M83/HW21M80J RM-W101 No. OPB6 Item OSD Language Selection GA US Latin Feature 2 Feature 1 KV-HW21M80 KV-HW21M83 KV-HW21M80J GA US (US Model Destination) 0 = US/CANADA/Latin 1 = Taiwan/Korea/Philippine (Wake-up timer enable) (GA Surround Spec:OFF, SIMULATED, SRS) Latin (US Model Latin Destination)

  • Page 29: Picture Quality Adjustments

    KV-HW21M80/HW21M83/HW21M80J RM-W101 3-3. PICTURE QUALITY ADJUSTMENTS SUB HUE ADJUSTMENT PMX/CONTRAST ADJUSTMENT 1. Select Video. 2. Input a NTSC 3.58 Color Bar to TV set. 1. Select Video Mode. 3. Set the following condition: 2. Input PAL CB to TV set.

  • Page 30: Drive Adjustment

    KV-HW21M80/HW21M83/HW21M80J RM-W101 WIDE MODE (50Hz) WIDE MODE (60Hz) (V-Compression Adjustment) (V-Compression Adjustment) 1. Input SPCB signal. 1. Input mono scope signal. 2. Adjust condition change to WIDE MODE : ON 2. Adjust condition change to WIDE MODE : ON , then [MUTE] + 3.

  • Page 31: Picture Distortion Adjustment

    KV-HW21M80/HW21M83/HW21M80J RM-W101 V. LINEARITY (VLIN), V. CORRECTION (SCOR), PIN 3-6. PICTURE DISTORTION ADJUSTMENT AMP (EWPW), AND HORIZONTAL TRAPEZOID H. CENTER ADJUSTMENT (HPOS) (EWTZ) ADJUSTMENTS 1. Input NTSC Monoscope signal. 1. Input NTSC Monoscope signal. 2. Activate the Service Adjustment Mode.

  • Page 33: Circuit Boards Location

    KV-HW21M80/HW21M83/HW21M80J RM-W101 4-2. CIRCUIT BOARDS LOCATION C Board A Board J Board (KV-HW21M83) 4-3. SCHEMATIC DIAGRAM INFORMATION Note: Reference information All capacitors are in µF unless otherwise noted. • RESISTOR : RN METAL FILM • All electrolytic capacitors are rated at 50V unless otherwise...

  • Page 35: A Board - Processor (Block A)

    KV-HW21M80/HW21M83/HW21M80J KV-HW21M80/HW21M83/HW21M80J RM-W101 RM-W101 4-3-2. A Board — Processor (Block A) CN007 CN009 TO A BOARD (JACK) CN003 CN905 CN004 TO C BOARD CN711 TO C BOARD CN701 C005 C006 U IN R377 1.5k CHIP PROCESSOR (BLOCK A) D066 3.3V...

  • Page 36: A Board - Audio (Block B)

    KV-HW21M80/HW21M83/HW21M80J KV-HW21M80/HW21M83/HW21M80J RM-W101 RM-W101 4-3-3. A Board — Audio (Block B) CN201 J201 J200 J202 TO J BOARD CN200 CN202 CN3400 R238 AUDIO (BLOCK B) CHIP R237 R239 CHIP CHIP C235 C234 470P 470p CHIP R233 CHIP C217 C223 C201...

  • Page 37: A Board - Power Supply (Block C)

    KV-HW21M80/HW21M83/HW21M80J KV-HW21M80/HW21M83/HW21M80J RM-W101 RM-W101 4-3-4. A Board — Power Supply (Block C) C672 0.01 C675 3.3V 3.3V (C1) To A3,D18 C641 POWER SUPPLY IC606 (BLOCK C) BA033T D635 3.3V REG 1.8V_MAIN (C2) To A49 C685 JW1665 C662 17.5MM IC607 C609...

  • Page 38: A Board - Deflection (Block D)

    KV-HW21M80/HW21M83/HW21M80J KV-HW21M80/HW21M83/HW21M80J RM-W101 RM-W101 4-3-5. A Board — Deflection (Block D) R305 CHIP DEFLECTION C078 R307 IC804 R300 16 16 17 17 STV9302A (BLOCK D) CHIP CHIP CHIP V-OUT T802 To A66 (D19) PH2LF R881 T801 R308 R303 2.2M :CHIP...

  • Page 39: A Board - Tuner (Block E)

    KV-HW21M80/HW21M83/HW21M80J KV-HW21M80/HW21M83/HW21M80J RM-W101 RM-W101 4-3-6. A Board — Tuner (Block E) B-BX1s12034-SA.-A..(Block E)-HW21 SWF103 SWF101 WAVE TU102 TUNER TUNER(TEDE9) SWF100 (BLOCK E) FILTER SURFACE WAVE C138 0.01 R112 6.8K B:CHIP CHIP D102 JR1100 R106 L101 CT131 TU101 XX 4.7K R111 CHIP 1.2UH...

  • Page 40: A Board - Jack (Block F)

    KV-HW21M80/HW21M83/HW21M80J KV-HW21M80/HW21M83/HW21M80J RM-W101 RM-W101 4-3-7. A Board — Jack (Block F) CN903 CN904 C966 JR1903 To E17 (F30) TU-AGC L902 CHIP To A63 (F29) B_INT 47uH R9031 To A62 (F28) B_DAT R9028 CHIP JACK To A64 (F27) B_CLK CHIP C956...

  • Page 41: J Board Schematic Diagram

    KV-HW21M80/HW21M83/HW21M80J RM-W101 4-3-8. J Board Schematic Diagrams (KV-HW21M83) 3D + IN J3400 GND/3D - IN D3402 CN3400 D3403 TO A BOARD (AUDIO) CN201 (3D TERMINAL) B-BX1s12034-SA.-J..-HW21 – 46 –...
  • Page 42 KV-HW21M80/HW21M83/HW21M80J RM-W101 A BOARD ✽ MARK LIST KV-HW21M80 KV-HW21M83 KV-HW21M80J C200 0.22 16V :CHIP 1 6.3V :CHIP 0.22 16V :CHIP C201 0.22 16V :CHIP 1 6.3V :CHIP 0.22 16V :CHIP C204 0.1 :PT 0.47 :PT 0.1 :PT C205 0.47 0.47 C206 0.01 25V :CHIP...

  • Page 43: Voltage Measurement And Waveforms

    KV-HW21M80/HW21M83/HW21M80J RM-W101 4-4. VOLTAGE MEASUREMENT AND WAVEFORMS A BOARD VOLTAGE LIST AND WAVEFORM Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] IC001 1.960V (1.4)[1.5] (1.7)[1.8] 1.860V (2.3)[2.2] NTSC (3.9)[3.8] 1.680V 216.0mV NTSC 920.0mV 5.440V 1.800V 3.120V 2.040V (1.8)[1.9] (1.8)[1.7] (1.9)[0.2]...
  • Page 44 KV-HW21M80/HW21M83/HW21M80J RM-W101 A BOARD VOLTAGE LIST AND WAVEFORM Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] IC200 10.9 IC804 Q201 23.2 23.9 (23)[23.1] (24)[23.9] Q202 –0.3 (11.3)[11.4] Q204 664.0mVp-p NTSC 23.9 Q205 10.4 11.2 (0.2)[2.2] IC601 Q601 744.0mVp-p 10.4 (0.3)[0.2]...
  • Page 45 KV-HW21M80/HW21M83/HW21M80J RM-W101 A BOARD VOLTAGE LIST AND WAVEFORM Pin No. Voltage[v] Pin No. Voltage[v] Q809 Q911 Q814 Q8009 198.3 198.5 Q900 Q8010 DY800 Q901 –0.1 Q902 –0.1 1.320V C BOARD VOLTAGE LIST AND WAVEFORM Pin No. Voltage[v] Pin No. Voltage[v] Pin No.

  • Page 46: Printed Wiring Boards And Parts Location

    KV-HW21M80/HW21M83/HW21M80J RM-W101 4-5. PRINTED WIRING BOARDS AND PARTS LOCATION PRINTED WIRING BOARDS [VIDEO AMP] [3D TERMINAL] – C Board – A703 A705 CN701 C754 CN704 CN703 R775 C752 R780 R781 R752 C790 R784 R776 G1-1 L780 R785 C759 G1-2 R786...
  • Page 47 KV-HW21M80/HW21M83/HW21M80J KV-HW21M80/HW21M83/HW21M80J RM-W101 RM-W101 PRINTED WIRING BOARDS NOTE: The circuit indicated at left contains high voltage of over [Processor, Audio, Power Supply, Deflection, Tuner, Jack ] 1220 Vp-p. Please pay attention when inspecting or repairing it to prevent an electric shock.

  • Page 48: Semiconductors

    KV-HW21M80/HW21M83/HW21M80J RM-W101 4-6. SEMICONDUCTORS DIODE CATHODE CATHODE ANODE (GRN) ANODE (GRN) CATHODE ANODE ANODE HSS82-TJ AM01AV1 10ERB20-TA2B5 BY228/A52A SPB-25MVWF D3SB60F3 D1NL20U 10ERB20-TB3 MTZJ-T-77-15 D3S6M-F 11EQS10-TB5 RD5.1ESB2 1SS133T-77 EGP20G EL1Z GP08D RU4AM-T3 S3L20UF4 TRANSISTOR ANODE ANODE CATHODE CATHODE MA2ZD14001S0 1PS226-115 MMDL914T1...
  • Page 49 KV-HW21M80/HW21M83/HW21M80J RM-W101 TOP VIEW STR-F6267S LF1357 BA18BCOFP SE135N-LF38 – 55 –...

  • Page 50: Exploded Views

    KV-HW21M80/HW21M83/HW21M80J RM-W101 SECTION 5 EXPLODED VIEWS NOTE: • • Items marked " ∗ " are not stocked since Items with no part number and no The components identified by description are not stocked because they are seldom required for routine...
  • Page 51 PIECE A (90) CONV. CORRECT * 4-093-713-01 SPEAKER DUCT (KV-HW21M83) (KV-HW21M80J) * 4-096-279-01 CUSHION, DUCT (125x5) KV-HW21M83) * A-1302-429-A COMPLETE PWB, A (KV-HW21M80) * A-1302-363-A COMPLETE PWB, A (KV-HW21M83) * 4-068-528-01 FOOT (KV-HW21M83) * A-1302-617-A COMPLETE PWB, A (KV-HW21M80J) – 57 –...

  • Page 52: Electrical Parts List

    REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK * A-1302-429-A COMPLETE PWB, A (KV-HW21M80) C055 1-100-829-31 CAP, PP FILM (S) 0.15MF * A-1302-363-A COMPLETE PWB, A (KV-HW21M83) C056 1-126-933-11 ELECT...
  • Page 53 KV-HW21M80/HW21M83/HW21M80J RM-W101 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK C213 1-115-339-11 CERAMIC CHIP 0.1UF C647 1-126-935-11 ELECT...
  • Page 54 KV-HW21M80/HW21M83/HW21M80J RM-W101 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK C870 1-106-387-00 MYLAR 0.068UF 10% 200V D059 8-719-081-97...
  • Page 55 KV-HW21M80/HW21M83/HW21M80J RM-W101 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK D827 8-719-302-43 DIODE EL1Z <CHIP CONDUCTOR> D829 8-719-069-55 DIODE UDZSTE-175.6B...
  • Page 56 KV-HW21M80/HW21M83/HW21M80J RM-W101 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK L033 1-469-525-91 INDUCTOR 10UH Q902 8-729-424-67 TRANSISTOR UN2216...
  • Page 57 KV-HW21M80/HW21M83/HW21M80J RM-W101 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R150 1-216-809-11 METAL CHIP 1/10W R400 1-260-288-11 CARBON 0.47...
  • Page 58 KV-HW21M80/HW21M83/HW21M80J RM-W101 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R846 1-216-825-11 METAL CHIP 2.2K 1/10W R940 1-216-849-11...
  • Page 59 <TUNER> TU102 1-693-636-11 TUNER (TEDE9) <CONNECTOR> CN201 1-564-506-11 PLUG, CONNECTOR 3P (KV-HW21M83) <VARISTOR> VDR600 1-804-995-21 VARISTOR <DIODE> D635 8-719-072-63 DIODE PDZ3.6B-115 (KV-HW21M80/M83) <CRYSTAL> D635 8-719-083-57 DIODE UDZSTE-173.6B (KV-HW21M80J) D819 6-500-567-31 DIODE 10ERB20-TB3 (KV-HW21M80/M83) X001 1-795-839-21 QUARTZ CRYSTAL UNIT D819 6-500-567-01...
  • Page 60 <TRANSFORMER> R757 1-219-746-11 METAL 1/2W ! 1-453-329-41 T801 TRANSFORMER ASSY FLYBACK R758 1-219-746-11 METAL 1/2W R763 1-260-087-11 CARBON 1/2W (NX-4751//M3A4) (KV-HW21M80/M80J) R764 1-260-087-11 CARBON 1/2W T801 ! 1-453-309-21 TRANSFORMER ASSY FLYBACK R765 1-260-087-11 CARBON 1/2W (NX-4450//M3A4) (KV-HW21M83) R773 1-260-132-11 CARBON...
  • Page 61 MANUAL, INSTRUCTION (KV-HW21M80/M83) 4-099-165-11 MANUAL,INSTRUCTION (KV-HW21M80J) 4-392-003-11 BAND, HOLD 4-392-004-11 CLIP **************************************************************** REMOTE COMMANDER ********************** 1-478-009-11 REMOTE COMMANDER (RM-W101) 4-084-290-01 REMOTE COMMANDER BATTERY COVER Sony Corporation Sony Technology Malaysia Sdn. Bhd. English  9-872-408-01 Visual Products 2003.11 – 67 –...

  • Page 62: Operating Instructions

    • Before operating the unit, please read this manual thoroughly and retain it for future reference. Mode d’emploi • Avant de faire fonctionner cet appareil, lisez attentivement le présent mode d’ emploi et conservez-le pour toute référence ultérieure. • • KV-HW21 © 2003 Sony Corporation...
  • Page 63 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
  • Page 64 Do not plug in too many appliances to the same To prevent fire or shock hazard, do not expose the power socket. Do not damage the power cord. TV to rain or moisture. Pull the power cord out by the plug. Do not pull the power cord itself.

  • Page 65: Securing The Tv

    x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. (1) Put a cord or chain through the clamps.
  • Page 66 Table of Contents Installation Additional Information Getting Started ........6 Connecting the TWEETER (KV-HW21M85 only) ......23 Setting up your TV (“Initial Setup”) ........7 Connecting the 3D WOOFER (KV-HW21M83 only) ......24 Connecting optional components ... 24 Overview of Controls Troubleshooting .........

  • Page 67: Installation

    Installation x Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •...

  • Page 68: Setting Up Your Tv ("Initial Setup")

    x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically and adjust the picture position using the buttons on the top control panel. and V/v/B/b buttons on the remote control can also be used for the •...

  • Page 69: Overview Of Controls

    Overview of Controls TV top control, front and rear panels TV top control panel PROG SOUND MODE MENU TV rear panel TV front panel (MONO) (MONO) (MONO) (MONO) (MONO) Button/Terminal Function Page Turn off or turn on the TV. Remote control sensor. –...

  • Page 70: Using The Remote Control And Basic Functions

    Using the remote control and basic functions PROG MENU Button Description Page Turn off temporarily or turn on the TV. – Display the TV program. – Jump to previous program number. – PROG +/– Select program number. – 2 +/– Adjust volume.
  • Page 71 continued Button Description Page Select sound mode options with a 5-Band Graphic Equalizer display. Select picture mode options. Menu operations MENU Display or cancel the menu. Confirm selected items. V, v, B, b Select and adjust items. Timer operations Set TV to turn on automatically. –...

  • Page 72: Advanced Operations

    Advanced Operations Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Personal” option. Selecting the picture mode Press to select the desired picture mode. Select To view “Dynamic”...

  • Page 73: Viewing Teletext (Kv-Hw21M85/Hw21M81 Only)

    x Viewing Teletext KV-HW21M85/HW21M81 only Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. Do this display a Teletext Press .

  • Page 74: Menu Adjustment

    Menu Adjustment x Introducing the menu system The MENU button lets you open a menu and change the settings of your TV. The following is an overview of the menu system. Return icon Picture icon Name of the current Sound icon Setup menu Language:...
  • Page 75 continued Level 1 Level 2 Level 3/Function Page “Timer” Set TV to turn off automatically. “Sleep Timer” Set TV to turn on automatically. “Wake Up Timer” Preset channels automatically. “Channel Setup” “Auto Program” Preset channels manually. “Manual Program” Select the TV system: “TV System”...
  • Page 76 How to use the menu PROG Picture Press MENU to Mode: Dynamic display the menu. Picture Adjustment Color Temperature: Cool Intelligent Picture: MENU Select Confirm Press V or v to select the desired item. Channel Setup Auto Program Manual Program TV System: Program Label Program Block...

  • Page 77: Changing The "Picture" Setting

    x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press MENU. Make sure the “Picture” icon ( ) is Picture Mode: Dynamic selected, then press Picture Adjustment Color Temperature: Cool Intelligent Picture: Select Confirm Press V or v to select the desired item (e.g., “Mode”), then press Select “Mode”...

  • Page 78: Changing The "Sound" Setting

    x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press MENU. Press V or v to select the “Sound” Sound Mode: Dynamic icon ( ), then press Sound Adjustment Balance Intelligent Volume: Surround: Select Confirm Press V or v to select the desired item (e.g., “Mode”), then press Select...
  • Page 79 continued Adjusting the “Sound Adjustment” item under “Personal” mode The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of “Personal” mode in the menu. Make sure that “Adjust” is selected, Adjustment: Personal then press Adjust Reset Selecting “Reset” will set your TV to the factory setting.

  • Page 80: Changing The "Timer" Setting

    x Changing the “Timer” setting The “Timer” menu allows you to set TV to turn off and turn on automatically. Press MENU. Press V or v to select the “Timer” icon ( ), Timer then press Sleep Timer: Wake Up Timer: Select Confirm Press V or v to select the desired item (e.g., “Sleep Timer”), then press...

  • Page 81: Changing The "Channel Setup" Setting

    x Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels, select the TV system, label the program number and block unwanted programs. Press MENU. Press V or v to select the “Channel Setup” Channel Setup icon ( ), then press...
  • Page 82 Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. Manual Program Program: (1) Make sure “Program” is selected, then press TV System: VHF Low (2) Press V or v until the program number you want Fine: Auto Skip:...

  • Page 83: Changing The "Setup" Setting

    x Changing the “Setup” setting The “Setup” menu allows you to change the menu language, adjust the picture position, change the picture size, label the connected equipment, select the color system and enjoy audio equipment sound. Press MENU. Press V or v to select the “Setup” icon Setup ), then press Language:...

  • Page 84: Additional Information

    Additional Information Connecting the TWEETER KV-HW21M85 only You can enjoy high quality sound by connecting the TWEETER. Step 2 Step 1 TWEETER Cable Step 3 clip – – TWEETER (8 ) Plain Striped wire wire Place the TWEETER on top of your TV. Peel off the protective sheet at the bottom of the cable clips, stick the 6 cable clips on the rear of your TV and slide the wires through the cable clips.

  • Page 85: Connecting The 3D Woofer (Kv-Hw21M83 Only)

    x Connecting the 3D WOOFER KV-HW21M83 only You can enjoy high quality sound by connecting the 3D WOOFER as follows: Step 1 Step 2 3D WOOFER Black Red wire wire Notes • Connect only the supplied 3D WOOFER; otherwise your TV may malfunction. •...

  • Page 86: Connecting To The Monitor Output Terminal ( T)

    Connecting to the monitor output terminal ( T ) TV rear panel Audio system Audio/Video (MONO) (MONO) cable (not supplied) Connecting to the component video input terminal ( TV rear panel Component video cable (not supplied) (MONO) (MONO) DVD player Audio cable (not supplied) Notes...

  • Page 87: Troubleshooting

    Troubleshooting If you find any problem while viewing your TV, please check the following guide. If any problem persists, contact your Sony dealer. Troubleshooting guide Symptom Solutions Page Possible cause Snowy picture • The connection is loose • Check the antenna cable and connection or the cable is on the TV, VCR and at the wall.
  • Page 88 • Do not use a hair dryer or other stripes equipment near the TV. interference from cars, neon signs, hair dryers, – • Check the antenna setup. Contact a Sony power generators, etc. dealer for advice. Double images or • Broadcast signals are –...
  • Page 89 TV, VCR, and at the the cable is damaged. incomplete (snowy wall. picture or double images). • The antenna setup is • Check the antenna setup. Contact a Sony – (KV-HW21M85/ dealer for advice. inappropriate. HW21M81 only) –...

  • Page 90: Specifications

    Specifications KV-HW21M85 KV-HW21M83 Note KV-HW21M81 KV-HW21M80 110-240 V AC, 50/60 Hz Power requirements Indicated on the rear of the TV Power consumption (W) B/G, I, D/K, M Television system PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43 Color system English, Farsi (Persian)
  • Page 91 • Before operating the unit, please read this manual thoroughly and retain it for future reference. Mode d’emploi • Avant de faire fonctionner cet appareil, lisez attentivement le présent mode d’ emploi et conservez-le pour toute référence ultérieure. • • KV-HW21 M80J © 2003 Sony Corporation...
  • Page 92 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
  • Page 93 Do not plug in too many appliances to the same To prevent fire or shock hazard, do not expose the power socket. Do not damage the power cord. TV to rain or moisture. Pull the power cord out by the plug. Do not pull the power cord itself.
  • Page 94 x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. (1) Put a cord or chain through the clamps.
  • Page 95 Table of Contents Installation Additional Information Connecting optional components ... 22 Getting Started ........6 Setting up your TV Troubleshooting ......... 24 (“Initial Setup”) ........7 Specifications ...... Back cover Overview of Controls TV top control, front and rear panels ..........8 Using the remote control and basic functions ........

  • Page 96: Installation

    Installation x Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •...

  • Page 97: Setting Up Your Tv ("Initial Setup")

    x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language and preset the TV channels automatically using the buttons on the top control panel. and V/v/B/b buttons on the remote control can also be used for the •...

  • Page 98: Overview Of Controls

    Overview of Controls TV top control, front and rear panels TV top control panel PROG SOUND MODE MENU TV rear panel (MONO) (MONO) TV front panel (MONO) Button/Terminal Function Page Turn off or turn on the TV. Remote control sensor. –...

  • Page 99: Using The Remote Control And Basic Functions

    Using the remote control and basic functions PROG MENU Button Description Page Turn off temporarily or turn on the TV. – Display the TV program. – Jump to previous program number. – PROG +/– Select program number. – 2 +/– Adjust volume.
  • Page 100 continued Button Description Page Select sound mode options with a 5-Band Graphic Equalizer display. Select picture mode options. Menu operations MENU Display or cancel the menu. Confirm selected items. V, v, B, b Select and adjust items. Timer operations Set TV to turn on automatically. –...

  • Page 101: Advanced Operations

    Advanced Operations Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Personal” option. Selecting the picture mode Press to select the desired picture mode. Select To view “Dynamic”...

  • Page 102: Menu Adjustment

    Menu Adjustment x Introducing the menu system The MENU button lets you open a menu and change the settings of your TV. The following is an overview of the menu system. Return icon Picture icon Name of the current Sound icon Setup menu Language:...
  • Page 103 Level 1 Level 2 Level 3/Function Page Set TV to turn off automatically. “Timer” “Sleep Timer” Set TV to turn on automatically. “Wake Up Timer” Preset channels automatically. “Channel Setup” “Auto Program” Preset channels manually. “Manual Program” Select the TV system: “TV System”...
  • Page 104 How to use the menu PROG Picture Press MENU to Mode: Dynamic display the menu. Picture Adjustment Color Temperature: Cool Intelligent Picture: MENU Select Confirm Press V or v to select the desired item. Channel Setup Auto Program Manual Program TV System: Program Label Program Block...

  • Page 105: Changing The "Picture" Setting

    x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press MENU. Make sure the “Picture” icon ( ) is Picture Mode: Dynamic selected, then press Picture Adjustment Color Temperature: Cool Intelligent Picture: Select Confirm Press V or v to select the desired item (e.g., “Mode”), then press Select “Mode”...

  • Page 106: Changing The "Sound" Setting

    x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press MENU. Press V or v to select the “Sound” Sound Mode: Dynamic icon ( ), then press Sound Adjustment Balance Intelligent Volume: Surround: Select Confirm Press V or v to select the desired item (e.g., “Mode”), then press Select...
  • Page 107 Adjusting the “Sound Adjustment” item under “Personal” mode The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of “Personal” mode in the menu. Make sure that “Adjust” is selected, Adjustment: Personal then press Adjust Reset Selecting “Reset” will set your TV to the factory setting.

  • Page 108: Changing The "Timer" Setting

    x Changing the “Timer” setting The “Timer” menu allows you to set TV to turn off and turn on automatically. Press MENU. Press V or v to select the “Timer” icon ( ), Timer Sleep Timer: then press Wake Up Timer: Select Confirm Press V or v to select the desired item (e.g., “Sleep Timer”), then press...

  • Page 109: Changing The "Channel Setup" Setting

    x Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels, select the TV system, label the program number and block unwanted programs. Press MENU. Press V or v to select the “Channel Setup” Channel Setup Auto Program icon (...
  • Page 110 continued Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. Manual Program Program: (1) Make sure “Program” is selected, then press TV System: VHF Low (2) Press V or v until the program number you want Fine: Auto Skip:...

  • Page 111: Changing The "Setup" Setting

    x Changing the “Setup” setting The “Setup” menu allows you to change the menu language, change the picture size, label the connected equipment, select the color system and enjoy audio equipment sound. Press MENU. Press V or v to select the “Setup” icon Setup Language: English...

  • Page 112: Additional Information

    Additional Information x Connecting optional components Connecting to the video input terminal ( t ) Audio/Video cable (not supplied) TV front panel Camcorder Audio cable (MONO) (not supplied) TV rear panel Walkman Antenna cable (not supplied) Audio/Video cable (MONO) (MONO) (not supplied) Note •...
  • Page 113 Connecting to the component video input terminal ( Component video cable (not supplied) (MONO) (MONO) DVD player Audio cable (not supplied) Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV.

  • Page 114: Troubleshooting

    Troubleshooting If you find any problem while viewing your TV, please check the following guide. If any problem persists, contact your Sony dealer. Troubleshooting guide Symptom Possible cause Solutions Page Snowy picture • The connection is loose • Check the antenna cable and connection or the cable is on the TV, VCR and at the wall.
  • Page 115 Dotted lines or interference from cars, equipment near the TV. stripes neon signs, hair dryers, – • Check the antenna setup. Contact a Sony power generators, etc. dealer for advice. – • Use a highly directional antenna. • Broadcast signals are...

  • Page 116: Specifications

    Stereo minijack i (Headphone) 21 in. Picture tube Measured diagonally Tube size (cm) Measured diagonally Screen size (cm) 630 × 460 × 492 Dimensions (w/h/d, mm) Mass (kg) Design and specifications are subject to change without notice. Sony Corporation Additional Information...

This manual is also suitable for:

Trinitron kv-hw21m83Trinitron kv-hw21m80j

Table of Contents