Thermostat Information; Outdoor Temperature Sensor (Select Models) - Honeywell Chronotherm IV T8611G Installation Instructions Manual

Deluxe programmable heat pump thermostats
Hide thumbs Also See for Chronotherm IV T8611G:
Table of Contents

Advertisement

THERMOSTAT INFORMATION

1. Press the Time
information.
2. Press the increase
date code. The first two large digits are the month
and the third digit is the last digit of the year.
(Example: 027 = February 1997).
3. Press the increase
ware identification code. (Example: 02 = software
ID code 2).
T8611G CHRONOTHERM
key to access the thermostat
key to display the production
key again to display the soft-
®
IV DELUXE PROGRAMMABLE HEAT PUMP THERMOSTATS
4. Press the increase
ware revision number (Example: 001 = Revision
number 1).
5. Press the increase
EEPROM identification code (Example: 314 =
M14613
EEPROM ID 314).
6. Press the Run Program key to exit the system test.
The system test times out after four minutes
without any key presses.
M14614
CHECKOUT
Outdoor Temperature Sensor
(Select Models)
Allow the outdoor temperature sensor to absorb the
outdoor air for a minimum of five minutes before taking a
reading.
M14615
9
key again to display the soft-
M14616
key again to display the
M14617
69-1406—1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents