Installer System Test - Honeywell CHRONOTHERM IV DELUXE T8624D Product Data

T8624D CHRONOTHERM
2. Press Day until the current day is displayed.
NOTE: Sun=Sunday, Mon=Monday, Tue=Tuesday,
Wed=Wednesday, Thu=Thursday, Fri=Friday,
Sat=Saturday.
Time Set Program
Set Current
Run
Wake Leave
Program Day/Time
Day
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
3. Press Time or Time
displayed.
NOTE: Tapping the Set Current Day/Time will change
the time in one hour increments.
Time
Time Set Program
Run Set Current
Leave
Wake
Program Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
NOTE: If the current time is Daylight Savings Time,
press Daylight Time until DST is displayed.
Time Set Program
Daylight
Run Set Current
Wake Leave
Day/Time
Program
Time
Heat/Cool
Hold Temp Day
Settings
Daylight Copy
Time
4. Press Run Program.
Time Set Program
Run
Run Set Current
Wake Leave
Day/Time
Program
Program
Heat/Cool
Hold Temp Day
Settings
Daylight Copy
Time

INSTALLER SYSTEM TEST

Use the Installer System Test to check the thermostat
operation. Refer to Table 7 for a list of the available
system tests.
To start the system test:
CAUTION
The minimum off time for compressors is bypassed
during the Installer System Test. Equipment damage
can occur if the compressor is cycled too quickly.
Press and hold the increase
same time, until 10 appears. All segments of the display are
displayed for three seconds before 10 appears. See Fig. 10
and 11.
68-0166—1
®
IV DELUXE PROGRAMMABLE THERMOSTAT
Set Day/Time
PM
Tue
Return Sleep
System Fan
M10313
until the current time is
Set Day/Time
AM
Tue
Return Sleep
System Fan
M10314
Set Day/Time
AM
Tue
Return Sleep
DST
System Fan
M10315
AM
Room
Tue
Return Sleep
Wake
System DST Fan
System Fan
Heat
M10316
and decrease keys, at the
Set Program Start Time
Hold for
Em Ht
Aux Ht
Mon TueWedThuFriSatSun
Wake LeaveReturnSleep
System
Em Heat Off Cool
Fig. 10. Display of all the segments of the LCD.
Fig. 11. Display of test number.
Table 7. Tests Available in Installer System Test.
Test
Number
10-19 Heating equipment can be turned on and off
30-39 Cooling equipment can be turned on and off
40-49 Fan equipment can be turned on and off
60 0 to Keyboard keys test
60 19
70-79 Thermostat information including date code and
software versions are displayed
Refer to Table 8 for the directions and results of the
Auto
specific tests.
NOTE: Press Time
Time to go to the previous test. Press
Run Program to exit the system test.
10
Temporary Setting Enrg
Set Day/Time
AM
PM
%Humid
Heat Cool Outdoor
In Recovery Auto Repl Batt
DST Fan
Auto Wait On
TEST NUMBER
System Test Description
to advance to the next test and
Sav
Room
Auto
M10345
M10257A