Sony TRINITRON KV-XR29M50 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. TV
  5. KV-XR29M50
  6. Service manual
Sony TRINITRON KV-XR29M50 Service Manual

Sony TRINITRON KV-XR29M50 Service Manual

Hide thumbs Also See for TRINITRON KV-XR29M50:
Table of Contents

Advertisement

Quick Links

REVISION HISTORY

MODEL
KV-XR29M50
KV-XR29M80
KV-XR29M80
KV-XR29M80
NO.
SUFFIX
1
-01
2003/12
DATE
SUPP / CORR
_ _
BX1
9-872-427-01
PART NO. :
DESCRIPTION
1st Issue
CHASSIS

Advertisement

Table of Contents
loading

Related Manuals for Sony TRINITRON KV-XR29M50

Summary of Contents for Sony TRINITRON KV-XR29M50

  • Page 1: Revision History

    REVISION HISTORY CHASSIS MODEL 9-872-427-01 PART NO. : KV-XR29M50 KV-XR29M80 KV-XR29M80 KV-XR29M80 SUFFIX DATE SUPP / CORR DESCRIPTION 2003/12 1st Issue...

  • Page 2: Service Manual

    SERVICE MANUAL CHASSIS MODEL COMMANDER DEST. CHASSIS NO. MODEL COMMANDER DEST. CHASSIS NO. KV-XR29M50 RM-W104 Malaysia SCC-U96M-A KV-XR29M80 RM-W104 ME SCC-U90V-A KV-XR29M80 RM-W104 Saudi Arabia SCC-V10J-A KV-XR29M80 RM-W104 Russia SCC-V13A-A RM-W104 TRINITRON COLOR TV ®...

  • Page 3: Table Of Contents

    OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS ANODE. WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. – 2 –...

  • Page 4: Self Diagnosis Function

    KV-XR29M50/XR29M80 RM-W104 SELF DIAGNOSIS FUNCTION The units in this manual contain a self diagnosis function. If an error occurs, the STANDBY (1) indicator will automatically begin to flash. The number of times the STANDBY (1) indicator flasher translates to a probable source of the problem. If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these problems occur.
  • Page 5 KV-XR29M50/XR29M80 RM-W104 2. DISPLAY OF STANDBY/(1) indicator FLASH COUNT Diagnosis Item Flash Count* +B overcurrent 2 times I-Prot 4 times IK (AKB) 5 times HV Protect 8 times * One flash count is not used for self-diagnosis. FLASH RED n Please refer diagnosis item.
  • Page 6 KV-XR29M50/XR29M80 RM-W104 5. HANDLING OF SELF-DIAGNOSTIC SCREEN DISPLAY Since the diagnosis results displayed on the screen are not automatically cleared, always check the self-diagnostic screen during repairs. When you have completed the repairs, clear the result display to "0". Unless the result display is cleared to "0", the self-diagnosis function will not be able to detect subsequent faults after completion of the repairs.

  • Page 7: Disassembly

    KV-XR29M50/XR29M80 RM-W104 SECTION 1 DISASSEMBLY 1-1. REAR COVER REMOVAL 1-2. SPEAKER REMOVAL 1 Two screws (Washer Head) 2 Rear cover (+P4 × 16) 1 Twelve screws (+BVTP 4 × 16 TYPE 2 IT-3) 1-3. CHASSIS ASSY REMOVAL 1-4. SERVICE POSITION 1-6.

  • Page 8: H3 Board Removal

    KV-XR29M50/XR29M80 RM-W104 1-8. A BOARD REMOVAL 1-7. H3 BOARD REMOVAL 1 Four screws (screws (3 × 12)(+) BVTAP) 2 Two screw 1 Six Hooks (washer head) (+P 3 × 12) 3 A Board H3 Board 4 Four Hooks 1-9. D3 BOARD REMOVAL...

  • Page 9: 1-10.Picture Tube Removal

    KV-XR29M50/XR29M80 RM-W104 1-10. PICTURE TUBE REMOVAL Note: • Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom right and left. 1) Place the TV set with the CRT face down on a cushion jig 2) Remove the rear cover.

  • Page 10: Set-Up Adjustments

    KV-XR29M50/XR29M80 RM-W104 SECTION 2 SET-UP ADJUSTMENTS Perform the adjustments in the following order : The following adjustments should be made when a 1. Beam Landing complete realignment is required or a new picture tube is 2. Convergence installed. 3. Focus 4.

  • Page 11: Convergence

    KV-XR29M50/XR29M80 RM-W104 H. STAT 2-2. CONVERGENCE • Before starting this adjustment, adjust the focus, horizontal size and vertical size. • Receive dot/hatch signal • Pic mode: Soft Center dot BMC (Hexapole) Magnet V. STAT Magnet H. STAT VR RV750 H. STAT...
  • Page 12 KV-XR29M50/XR29M80 RM-W104 Rotate TLV-2 VOL (29", 34") on DY 7. Y separation axis correction magnet adjustment. XCV Rotate XCV Adj core on DY 1. Receive the cross-hatch signal and adjust YCH Rotate YCH VOL on DY [PICTURE] to [MIN] and [BRIGHTNESS] to [STANDARD] .

  • Page 13: Focus Adjustment

    KV-XR29M50/XR29M80 RM-W104 2-3. FOCUS ADJUSTMENT 2-4. G2 (SCREEN) ADJUSTMENTS FOCUS adjustment should be completed before W/B 1. Set the PICTURE to Normal. 2. Put the VIDEO input mode without signals adjustment. 3. Connect R,G,B of the C board cathode to the oscilloscope.

  • Page 14: Circuit Adjustments

    VDSP Detected Stereo Type (Direct Value from CZ_ Stereo_Mode) Needed for Nicam DCXO aligment Purpose S : for Sony A : Aiwa Value of x = 0 - Unknown, 1 - BTSC, 2 - A2, 3 - NICAM, : US/Latin/Taiwan...

  • Page 15: Adjustment Method

    KV-XR29M50/XR29M80 RM-W104 e. OTHER FUNCTION VIA REMOTE COMMANDER 7, - All the data becomes the values in memory. 8, - All user control goes to the standard state. [Display], - Service data initialization (Be sure not to use usually.) 2, 5 Select Device or Category (Up, Down) 3-2.
  • Page 26 KV-XR29M50/XR29M80 RM-W104 Data variant depend on models NOTE: This data with remark ** Category Name AV Stereo Stereo SDEM Category Name AV Stereo Stereo SDEC EPMD STDS DCXI DCXG DCLH Category Name AV Stereo Stereo XR29M50 MP3 Set OPTM DCXO...
  • Page 27 KV-XR29M50/XR29M80 RM-W104 ITEM INFORMATION No. OPB1 Item Speed Search L’ L(Euro), M(GA) Decimal KV-XR29M50 KV-XR29M80 (ME) KV-XR29M80 (Saudi Arabia) KV-XR29M80 (Russia) SPEED SEARCH (Time of speed search) 00 = disabled (original cycle speed) 01 = 4 time speed from the original...
  • Page 28 KV-XR29M50/XR29M80 RM-W104 No. OPB3 Item HDEV NICAM ST NICAM BI A2 ST Thai US ST MONO Decimal Bilingual Korean ST KV-XR29M50 KV-XR29M80 (ME) KV-XR29M80 (Saudi Arabia) KV-XR29M80 (Russia) HDEV (High Deviation Mode) 0 = disabled, 1 = enabled NICAM ST...
  • Page 29 KV-XR29M50/XR29M80 RM-W104 No. OPB5 Item Full Forced 60 Tilt IP Plus Wide Decimal Surround Surround KV-XR29M50 KV-XR29M80 (ME) KV-XR29M80 (Saudi Arabia) KV-XR29M80 (Russia) Full Surround (Full Surround option - no for euro model) 0 = Normal Surround Model 1 = Full Surround Model...

  • Page 30: Picture Quality Adjustment

    KV-XR29M50/XR29M80 RM-W104 3-3. PICTURE QUALITY ADJUSTMENT 80mV SUB COLOR ADJUSTMENT 1. Select Video. 2. Input PAL 100% Color Bar. 3. Set to following condition: PICTURE 100%,COLOR 50%, BRIGHTNESS 50%, VB1 = VB2 = VB3 = VB4 HUE Center, SHP 50%.

  • Page 31: Deflection Adjustment

    KV-XR29M50/XR29M80 RM-W104 WIDE MODE (50Hz) 3-4. DEFLECTION ADJUSTMENT (V-Compression Adjustment) H-TRAPEZOID ADJUSTMENT 1. Input SPCB signal(For NTSC models select Video 1. Receive cross hatch/dot signal mode) 2. Adjust RV1801 on C-Board to make H-Trapezoid 2. Adjust condition to WIDE MODE : ON.
  • Page 32 KV-XR29M50/XR29M80 RM-W104 NORMAL MODE (60Hz) WIDE MODE (60Hz) 1. Input 525/60Hz signal. (V-Compression Adjustment) 2. Using the buttons select category GEOM 1. Input mono scope signal (Service Mode.) 2. Adjust condition to WIDE MODE : ON. 3. Raise/ lower data using the buttons to 3.

  • Page 33: Picture Distortion Adjustment

    KV-XR29M50/XR29M80 RM-W104 V.LINEARITY (VLIN), S CORRECTION (SCOR), EW 3-5. PICTURE DISTORTION ADJUSTMENT PARABOLA/WIDTH (EWPW), AND EW TRAPEZIUM (EWTZ) ADJUSTMENTS H. CENTER ADJUSTMENT (HPOS) 1. Input Monoscope signal. 1. Input Monoscope signal. 2. Activate the Service Mode. 2. Activate the Service Adjustment Mode.

  • Page 35: Circuit Boards Location

    KV-XR29M50/XR29M80 RM-W104 4-2. CIRCUIT BOARDS LOCATION C Board D3 Board H3 Board VM Board A Board F Board J1 Board 4-3. SCHEMATIC DIAGRAM INFORMATION Reference information Note: • All capacitors are in µF unless otherwise noted. RESISTOR : RN METAL FILM •...

  • Page 37: A Board - Processor (Block A)

    KV-XR29M50/XR29M80 KV-XR29M50/XR29M80 RM-W104 RM-W104 4-3-2. A Board — Processor (Block A) CN005 CN003 TO VM BOARD CN5901 CN004 TO C BOARD CN701 C006 C093 PROCESSOR 3.3V (BLOCK A) D057 MMDL914T1 R-MUTE D058 MMDL914T1 R5010 R5012 G MUTE RN-CP RN-CP C592...

  • Page 38: A Board - Audio (Block B)

    KV-XR29M50/XR29M80 KV-XR29M50/XR29M80 RM-W104 RM-W104 4-3-3. A Board — Audio (Block B) CN202 CN203 CN208 6P:S-MICRO TO B BOARD TO H3 BOARD CN 205 CN3903 R238 R237 RN-CP C234 RN-CP JR1280 470P CHIP C235 470P C202 IC200 CHIP 0.047 R208 AN5276T...

  • Page 39: A Board - Power Supply/Deflection

    KV-XR29M50/XR29M80 KV-XR29M50/XR29M80 RM-W104 RM-W104 4-3-4. A Board — Power Supply/Deflection (Block C) CN605 CHOKE COIL R6021 C638 TH601 RN-CP 0.0047 R6022 C698 ‘ C626 500V R681 C658 Q617 THERMISTOR, NTC Q614 47 35V 0.0047 0.01 RN-CP 500V C627 UN2211 MSB709-RT1 R6018 0.0047...

  • Page 40: A Board - Tuner (Block D)

    KV-XR29M50/XR29M80 KV-XR29M50/XR29M80 RM-W104 RM-W104 4-3-5. A Board — Tuner (Block D) SWF101 C112 FILTER SURFACE B:CHIP WAVE C139 0.01 SWF100 (BLOCK D) R106 B:CHIP FILTER R112 R114 4.7K SURFACE WAVE C140 6.8K 2.2K R111 CHIP CHIP C113 CHIP JR1100 TU101 0.0047...

  • Page 41: A Board - Jack (Block E)

    KV-XR29M50/XR29M80 KV-XR29M50/XR29M80 RM-W104 RM-W104 4-3-6. A Board — Jack (Block E) CN904 CN903 4P:VH BUS CONNECTOR BUS CONNECTOR CN015 TO B BOARD CN1425 To D18 (E45)TU-AGC JR1980 To A67 (E44) B_INT R901 R900 CHIP R903 To A68 (E43) B_DAT RN-CP...

  • Page 42: A Board - Heat Sink (Block F)

    KV-XR29M50/XR29M80 RM-W104 4-3-7. A Board — Heat Sink (Block F) Mount Mecha A001 409311901 IC001 Mount Mecha A200 409500101 IC200 EY001 EY002 Mount Mecha A503 X40360521 IC503 EY551 EY550 Mount Mecha A604 407215201 IC604 Mount Mecha A6071 403343761 IC607 Mount Mecha...

  • Page 44: H3 Board Schematic Diagram

    KV-XR29M50/XR29M80 KV-XR29M50/XR29M80 RM-W104 RM-W104 4-3-9. H3 Board Schematic Diagram CN3901 CN3602 CN3905 CN3903 CN3908 TO A BOARD CN3601 TO SPEAKER TO A BOARD (POWER SUPPLY TO A BOARD TO A BOARD CN3906 (AUDIO) /DEFLECTION) CN3902 CN3904 (JACK) (PROCCESSOR) TO F BOARD...

  • Page 45: D3, J1 And F Boards Schematic Diagrams

    KV-XR29M50/XR29M80 KV-XR29M50/XR29M80 RM-W104 RM-W104 4-3-10. D3, J1 and F Board Schematic Diagram C2806 C2801 0.047 L2803 100V 100V CN2802 3.3mH IC2801 R2817 270k LM358D CHIP R2807 D2800 V.PARA.AMP 1.8k TO VM BOARD ELIZ FPRD CN2801 BIAS R2816 L2800 D2801 Q2801...
  • Page 46 KV-XR29M50/XR29M80 RM-W104 A Board ✼ Mark List KV-XR29M80 KV-XR29M80 KV-XR29M50 KV-XR29M80 (SA) (ME) (EM) (Russia) C619 470 450V C620 820 250V 820 250V 820 250V C621 820 250V 820 250V 820 250V C646 22 25V 22 25V 22 25V C691 0.47 450V...

  • Page 47: Voltage Measurement And Waveforms

    KV-XR29M50/XR29M80 RM-W104 4-4. VOLTAGE MEASUREMENT AND WAVEFORMS A BOARD VOLTAGE LIST AND WAVEFORM Pin No Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] IC001 2.040V NTSC 2.240V (*) [1.7] NTSC (0.9)[0.4] (0.9)[0.3] 2.520V (32.7)[32.2] 2.120V (0.8)[0.3] (0)[1.0] (3.9)[4.1] (3.9)[4.0] (1.4)[0] 21.2 33.5...
  • Page 48 KV-XR29M50/XR29M80 RM-W104 A BOARD VOLTAGE LIST AND WAVEFORM Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] -30.0 IC609 Q001 (0)[-25.5] 1.000V 30.00Vp-p NTSC Q009 (0)[2.1] -14.8 (0)[*] (0.4)[-116.0] (2.2)[*] 13.1 Q012 1.300V Q013 (39.8)[0] Q014 1.580Vp-p (39.8)[0] IC602 72.4 Q100 (2.7)[3.5]...
  • Page 49 KV-XR29M50/XR29M80 RM-W104 A BOARD VOLTAGE LIST AND WAVEFORM Pin No. Pin No. Voltage[v] Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] Q507 12.5 Q609 Q912 (148.3)[1.8] 13.1 Q509 Q610 PH601 13.5 (74.1)[66.3] 12.4 Q511 -149.3 Q611 (6.4)[5.5] 378.0 (0)[1.3] Q612 (0)[0.5] Q613 (25.9)[0.2]...
  • Page 50 KV-XR29M50/XR29M80 RM-W104 C BOARD VOLTAGE LIST AND WAVEFORM Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] IC751 138.4 (5.8)[4.8] 11.1 (11.0)[9.6] 12.5 IC3800 1.660V 126.0V (3.9)[3.3] NTSC NTSC (5.3)[4.4] 2.020V 160.0V (134.1)[131.3] 12.8 J751 (139.6)[137.3] (134)[131.7] (132)[128.5] (0.1)[19.0] (0.2)[20.9] Q701 (5.0)[4.6]...

  • Page 51: Printed Wiring Boards And Parts Location

    KV-XR29M50/XR29M80 KV-XR29M50/XR29M80 RM-W104 RM-W104 4-5. PRINTED WIRING BOARDS AND PARTS LOCATION NOTE: PRINTED WIRING BOARDS The circuit indicated at left contains high voltage of over 1220 Vp-p. Please pay attention when inspecting or repairing it to prevent an electric shock.
  • Page 52 KV-XR29M50/XR29M80 KV-XR29M50/XR29M80 RM-W104 RM-W104 PRINTED WIRING BOARDS [VELOCITY MODULATION] [FRONT PANEL] [RGB AMPLIFIER, ROTATION CIRCUIT, LANDING CORRECTION CIRCUIT] – H3 board – CN3901 CN3908 CN3909 CN3906 CN3903 CN3905 CN3902 CN3904 1-860-455-12 D3913 D3901 (1-723-520-12) C3904 F3601 C3900 D3912 L3902 AC IN...
  • Page 53 KV-XR29M50/XR29M80 RM-W104 PRINTED WIRING BOARDS [DYNAMIC FOCUS & DQP] [CISPR] [DVD TERMINAL] – D3 board – 1-860-368-11 (1-723-488-11) CN2800 IC2800 T2800 CN2803 C2802 R2803 R2800 R2805 R2804 C2811 R2802 L2800 R2806 R2816 R2808 D2803 C2812 D2802 R2810 D2800 C2806 C2804...

  • Page 54: Semiconductors

    KV-XR29M50/XR29M80 RM-W104 4-6. SEMICONDUCTORS DIODE CATHODE CATHODE ANODE ANODE CATHODE CATHODE ANODE ANODE D2L20U D1NL20U-TR MMDL914T1 MA2ZD14001S0 ERC06-15S D4SB60L HSS82-TJ D1NS6 MA77 RD5.6SB-T1 U05G D4SBL20U EL1Z UDZSTE-179.1B MTZJ-T-77-15 D10SBS4F UDZS-TE17-12B MTZJ-T-77-22 ERA22-08 RD5.6ESB2 GP08D RD6.8ES-B1 UF4005PKG23 10ERB20-TB5 RD18ESB RD39ESB UPC574J...
  • Page 55 KV-XR29M50/XR29M80 RM-W104 TOP VIEW Dual In-line Package Pin 6~98 TOP VIEW BA18BCOWFP-E2 LM358D NJM78M09FA TDA8177 BR24L16F-WE2 MCZ3001DA LA6510 – 63 –...

  • Page 56: Exploded Views

    SCREW (WASHER HEAD) (+P 4x16) ! 1-419-323-11 COIL DEGAUSSING (KV-XR29M50) 1-825-691-11 SPEAKER (15x6.5cm) ! 1-419-294-11 * 4-046-981-03 BRACKET SPEAKER COIL DEGAUSSING (except KV-XR29M50) 4-063-935-21 CUSHION (50x550) DGC 4-064-883-03 HOLDER DGC 1-452-896-11 COIL NA ROTATION (RT200) * A-1410-218-A MOUNTED PWB, VM...

  • Page 57: Chassis

    CORD AC POWER (WITH CONNECTOR) (FOR CONNECTOR; ASSY, 4P VH(1)) (Russia) CN600 (A BOARD) – CN3602 (H3 BOARD) *! 4-095-844-01 BRACKET TERMINAL * A-1302-875-A COMPLETE PWB, A (KV-XR29M50) * A-1302-874-A COMPLETE PWB, A (ME/Saudi Arabia) * A-1302-878-A COMPLETE PWB, A (Russia) – 65 –...

  • Page 58: Electrical Parts List

    REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK * A-1302-875-A COMPLETE PWB, A (KV-XR29M50) C053 1-164-227-11 CERAMIC CHIP 0.022UF 10.00% 25V * A-1302-874-A COMPLETE PWB, A (ME/SAUDI ARABIA) C054 1-107-826-11 CERAMIC CHIP 0.1UF...
  • Page 59 KV-XR29M50/XR29M80 RM-W104 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK C207 1-130-495-00 MYLAR 0.1UF 5.00% C553 1-162-116-00 CERAMIC 680PF 10.00% 2KV...
  • Page 60 KV-XR29M50/XR29M80 RM-W104 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK C659 1-125-969-91 CERAMIC 680PF 10.00% 1KV * CN503...
  • Page 61 KV-XR29M50/XR29M80 RM-W104 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK D548 8-719-991-33 DIODE 1SS133T-77 FB600 1-410-397-21 FERRITE 1.1UH...
  • Page 62 KV-XR29M50/XR29M80 RM-W104 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK JR030 1-216-864-11 SHORT CHIP <TRANSISTOR> JR600 1-216-864-11 SHORT CHIP...
  • Page 63 KV-XR29M50/XR29M80 RM-W104 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R045 1-216-809-11 METAL CHIP 1/10W R309 1-216-847-11 METAL CHIP...
  • Page 64 KV-XR29M50/XR29M80 RM-W104 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R549 1-215-447-00 METAL 1/4W R678 1-249-421-11 CARBON 2.2K...
  • Page 65 METAL CHIP 1/10W (KV-XR29M50) R6026 1-216-833-11 METAL CHIP 1/10W C620 1-113-611-11 ELECT(BLOCK) 820UF 250V R6027 1-216-833-11 METAL CHIP 1/10W (Except KV-XR29M50) C621 1-113-611-11 ELECT(BLOCK) 820UF 250V R6028 1-208-840-11 METAL CHIP 270K 0.50% 1/10W (Except KV-XR29M50) R6029 1-218-760-11 METAL CHIP 220K 0.50%...
  • Page 66 8-719-970-83 DIODE HSS82-TJ D782 8-719-109-89 DIODE RD5.6ESB2 <RELAY> D783 8-719-991-33 DIODE 1SS133T-77 D784 8-719-991-33 DIODE 1SS133T-77 RY601 ! 1-755-395-11 RELAY (AC POWER) (Except KV-XR29M50) D1803 8-719-911-19 DIODE 1SS119-25 D1804 8-719-911-19 DIODE 1SS119-25 D1808 8-719-908-03 DIODE GP08D <VARISTOR> VD600 1-804-824-11 VARISTOR ENE271D-20A <IC>...
  • Page 67 KV-XR29M50/XR29M80 RM-W104 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK <TRANSISTOR> C2803 ! 1-110-541-91 FILM 0.056UF 5.00% 630V...
  • Page 68 KV-XR29M50/XR29M80 RM-W104 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK <TRANSFORMER> * CN3901 1-564-507-11 PLUG, CONNECTOR 4P * CN3903...
  • Page 69 CUSHION, LOWER D5901 8-719-911-19 DIODE 1SS119-25 * 4-096-555-01 CUSHION, UPPER D5902 8-719-110-86 DIODE RD39ESB * 4-098-749-01 INDIVIDUAL CARTON 4-100-612-12 MANUAL, INSTRUCTION (KV-XR29M50) D5903 8-719-911-19 DIODE 1SS119-25 D5904 8-719-110-86 DIODE RD39ESB 4-100-941-11 MANUAL, INSTRUCTION (ME/Saudi Arabia) D5905 8-719-911-19 DIODE 1SS119-25 4-101-845-11...
  • Page 70 ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK Sony Corporation Sony Technology Malaysia Sdn. Bhd. English  9-872-427-01 Visual Products 2003.12 – 78 –...
  • Page 71 • Before operating the unit, please read this manual thoroughly and retain it for future reference. • Panduan Pengendalian • Sebelum mengendalikan unit, sila baca buku panduan ini dengan teliti dan simpan untuk rujukan masa depan. KV-XR34 KV-XR29 KV-XR25 © 2003 Sony Corporation...
  • Page 72 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 220 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
  • Page 73 Do not plug in too many appliances to the same To prevent fire or shock hazard, do not expose the power socket. Do not damage the power cord. TV to rain or moisture. Pull the power cord out by the plug. Do not pull the power cord itself.

  • Page 74: Securing The Tv

    x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. (1) Put a cord or chain through the clamps.
  • Page 75 Table of Contents Menu Adjustment Installation Getting Started ........6 Introducing the menu system ..14 Setting up your TV Changing the “Picture” setting ..17 (“Initial Setup”) ........7 Changing the “Sound” setting ..18 Changing the “Timer” setting ..20 Overview of Controls Changing the “Channel Setup”...

  • Page 76: Installation

    Installation x Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •...

  • Page 77: Setting Up Your Tv ("Initial Setup")

    x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically and adjust the picture position using the buttons on the TV front panel. •...

  • Page 78: Overview Of Controls

    Overview of Controls TV front and rear panels TV rear panel L(MONO) AUTO PROG:Press (MENU) For 5sec SOUND MENU MODE (AUTO PROG) PROG qf qd TV front panel L(MONO) AUTO PROG:Press ([MENU] for 5sec SOUND MENU MODE (AUTO PROG) PROG Button/Terminal Function Page...

  • Page 79: Using The Remote Control And Basic Functions

    Using the remote control and basic functions PROG MENU RESET Button Description Page Turn off temporarily or turn on the TV. – Display the TV program. – Jump to last program number that has been – watched for at least five seconds. PROG +/–...
  • Page 80 continued Button Description Page Select sound mode options. 5-Band Graphic Equalizer display will appear. Select picture mode options. Menu operations MENU Display or cancel the menu. Confirm selected items. V, v, B, b Select and adjust items. Timer operations Set TV to turn on automatically. –...

  • Page 81: Advanced Operations

    Advanced Operations Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Personal” option. Selecting the picture mode Press to select the desired picture mode. Select To view “Dynamic”...

  • Page 82: Enjoying Stereo Or Bilingual Programs (Kv-Xr34M61/Xr29M61 Only)

    x Enjoying stereo or bilingual programs KV-XR34M61/XR29M61 only You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. When receiving a NICAM program Broadcasting On-screen display (Selected sound) NICAM Mono NICAM stereo (Regular sound) (Stereo sound)

  • Page 83: Viewing Teletext (Kv-Xr34M61/Xr29M61 Only)

    x Viewing Teletext KV-XR34M61/XR29M61 only Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. Do this display a Teletext Press .

  • Page 84: Menu Adjustment

    Menu Adjustment x Introducing the menu system The MENU button lets you open a menu and change the settings of your TV. The following is an overview of the menu system. Return icon Picture icon Name of the current Sound icon Setup menu Language:...
  • Page 85 Level 3/Function Page Level 1 Level 2 Set TV to turn off automatically. “Timer” “Sleep Timer” Set TV to turn on automatically. “Wake Up Timer” “Channel Setup” “Auto Program” Preset channels automatically. Preset channels manually. “Manual Program” Select the TV system: “TV System”...
  • Page 86 continued How to use the menu PROG Picture Press MENU to Mode: Dynamic Picture Adjustment display the menu. Color Temperature: Cool High MENU Intelligent Picture: Select Confirm RESET Press V or v to select the desired item. Channel Setup Auto Program Manual Program TV System: Program Label...

  • Page 87: Changing The "Picture" Setting

    x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press MENU. Make sure the “Picture” icon ( ) is Picture Mode: Dynamic selected, then press Picture Adjustment Color Temperature: Cool High Intelligent Picture: Select Confirm Press V or v to select the desired item (e.g., “Mode”), then press Select...

  • Page 88: Changing The "Sound" Setting

    x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press MENU. Press V or v to select the “Sound” icon ( Sound Mode: Dynamic then press Sound Adjustment Balance Intelligent Volume: Surround: Select Confirm Press V or v to select the desired item (e.g., “Mode”), then press Select “Mode”...
  • Page 89 Adjusting the “Sound Adjustment” item under “Personal” mode The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of “Personal” mode in the menu. Make sure that “Adjust” is selected, Adjustment: Personal then press Adjust Reset Selecting “Reset” will set your TV to the factory setting.

  • Page 90: Changing The "Timer" Setting

    x Changing the “Timer” setting The “Timer” menu allows you to set TV to turn off and turn on automatically. Press MENU. Press V or v to select the “Timer” icon ( ), Timer then press Sleep Timer: Wake Up Timer: Select Confirm Press V or v to select the desired item (e.g., “Sleep Timer”), then press...

  • Page 91: Changing The "Channel Setup" Setting

    If you preset a blocked program number, that program number will be unblocked automatically. Note • During automatic channel presetting, your TV screen will indicate “B/G”, “I”, “D/K” or “M” (KV-XR29M50/XR25M50 only) and “Auto” (KV-XR34M61/XR29M61 only) for the “TV System”. continue Menu Adjustment...
  • Page 92 continued Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. Manual Program Program: (1) Make sure “Program” is selected, then press TV System: VHF Low (2) Press V or v until the program number you want Fine: Auto Skip:...

  • Page 93: Changing The "Setup" Setting

    x Changing the “Setup” setting The “Setup” menu allows you to change the menu language, adjust the picture position, change the picture size, label the connected equipment and select the color system. Press MENU. Press V or v to select the “Setup” icon ( Setup then press Language:...

  • Page 94: Additional Information

    Additional Information x Connecting optional components Connecting to the video input terminal ( t ) TV front panel (MONO) Camcorder Audio/Video cable (not supplied) Video game TV rear panel equipment Antenna cable (not supplied) Audio/Video cable (not supplied) Notes • If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the program number 0 on the TV (see page 22).
  • Page 95 Connecting to the component video input terminal ( TV rear panel Component video cable (not supplied) DVD player Audio cable (not supplied) Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV.

  • Page 96: Troubleshooting

    • The antenna setup is • Check the antenna setup. – inappropriate. Contact a Sony dealer for advice. Noisy sound • Channel presetting is • Display the “Channel Setup” menu and inappropriate or select “Manual Program” to preset the incomplete.
  • Page 97 Dotted lines or interference from cars, equipment near the TV. stripes neon signs, hair dryers, • Check the antenna setup. Contact a Sony – power generators, etc. dealer for advice. • Broadcast signals are • Use a highly directional antenna.
  • Page 98 TV cannot on the TV, VCR and at the wall. or the cable is receive stereo damaged. broadcast sound. • Check the antenna setup. Contact a Sony • The antenna setup is – dealer for advice. inappropriate. Stereo broadcast sound switches...
  • Page 99 (standby) indicator flashes. Press ! indicator on your diagnosis function TV flashes red (main power) to turn off your TV. indicates the possible several times after Contact your nearest Sony service problems. every three center. seconds. • Changes in room TV cabinet temperature sometimes creaks.

  • Page 100: Specifications

    Specifications Note KV-XR34M61 KV-XR29M61 KV-XR25M50 KV-XR29M50 Power requirements 220-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G, I, D/K, M Color system PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43 Stereo/Bilingual system NICAM Stereo/Bilingual B/G, I;...
  • Page 101 • Before operating the unit, please read this manual thoroughly and retain it for future reference. Mode d’emploi • Avant de faire fonctionner cet appareil, lisez attentivement le présent mode d’ emploi et conservez-le pour toute référence ultérieure. • • KV-XR34 KV-XR29 KV-XR25 © 2003 Sony Corporation...
  • Page 102 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
  • Page 103 To prevent fire or shock hazard, do not expose the Do not plug in too many appliances to the same TV to rain or moisture. power socket. Do not damage the power cord. Pull the power cord out by the plug. Do not pull the power cord itself.
  • Page 104 x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. (1) Put a cord or chain through the clamps.
  • Page 105 Table of Contents Menu Adjustment Installation Getting Started ........6 Introducing the menu system ..13 Setting up your TV Changing the “Picture” setting ..16 (“Initial Setup”) ........7 Changing the “Sound” setting ..17 Changing the “Timer” setting ..19 Overview of Controls Changing the “Channel Setup”...

  • Page 106: Installation

    Installation x Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •...

  • Page 107: Setting Up Your Tv ("Initial Setup")

    x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically and adjust the picture position using the buttons on the TV front panel. •...

  • Page 108: Overview Of Controls

    Overview of Controls TV front and rear panels TV rear panel L(MONO) ENTER SELECT AUTO MENU PROGR PROGR qf qd TV front panel L(MONO) AUTO PROG:Press [MENU] for 5sec SOUND MENU MODE (AUTO PROG) PROG Button/Terminal Function Page Remote control sensor. –...

  • Page 109: Using The Remote Control And Basic Functions

    Using the remote control and basic functions PROG MENU RESET Button Description Page Turn off temporarily or turn on the TV. – Display the TV program. – Jump to previous program number. – PROG +/– Select program number. – 2 +/– Adjust volume.
  • Page 110 continued Button Description Page Select sound mode options. “5-Band Graphic Equalizer” display will appear. Select picture mode options. Menu operations MENU Display or cancel the menu. Confirm selected items. V, v, B, b Select and adjust items. Timer operations Set TV to turn on automatically. –...

  • Page 111: Advanced Operations

    Advanced Operations Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Personal” option. Selecting the picture mode Press to select the desired picture mode. Select To view “Dynamic”...

  • Page 112: Viewing Teletext (Kv-Xr34M81/Xr29M81/ Xr25M81 Only)

    x Viewing Teletext KV-XR34M81/XR29M81/XR25M81 only Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. Do this display a Teletext Press .

  • Page 113: Menu Adjustment

    Menu Adjustment x Introducing the menu system The MENU button lets you open a menu and change the settings of your TV. The following is an overview of the menu system. Return icon Picture icon Name of the current Sound icon Setup menu Language:...
  • Page 114 continued Level 3/Function Page Level 1 Level 2 Set TV to turn off automatically. “Timer” “Sleep Timer” Set TV to turn on automatically. “Wake Up Timer” Preset channels automatically. “Channel Setup” “Auto Program” Preset channels manually. “Manual Program” Select the TV system: “TV System”...
  • Page 115 How to use the menu PROG Picture Press MENU to Mode: Dynamic Picture Adjustment display the menu. Color Temperature: Cool High MENU Intelligent Picture: Select Confirm RESET Press V or v to select the desired item. Channel Setup Auto Program Manual Program TV System: Program Label...

  • Page 116: Changing The "Picture" Setting

    x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press MENU. Make sure the “Picture” icon ( ) is Picture Mode: Dynamic selected, then press Picture Adjustment Color Temperature: Cool High Intelligent Picture: Select Confirm Press V or v to select the desired item (e.g., “Mode”), then press Select...

  • Page 117: Changing The "Sound" Setting

    x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press MENU. Press V or v to select the “Sound” Sound Mode: Dynamic icon ( ), then press Sound Adjustment Balance Intelligent Volume: Surround: Select Confirm Press V or v to select the desired item (e.g., “Mode”), then press Select...
  • Page 118 continued Adjusting the “Sound Adjustment” item under “Personal” mode The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of “Personal” mode in the menu. Make sure that “Adjust” is selected, Adjustment: Personal then press Adjust Reset Selecting “Reset” will set your TV to the factory setting.

  • Page 119: Changing The "Timer" Setting

    x Changing the “Timer” setting The “Timer” menu allows you to set TV to turn off and turn on automatically. Press MENU. Press V or v to select the “Timer” icon ( ), Timer then press Sleep Timer: Wake Up Timer: Select Confirm Press V or v to select the desired item (e.g., “Sleep Timer”), then press...

  • Page 120: Changing The "Channel Setup" Setting

    x Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels, select the TV system, label the program number and block unwanted programs. Press MENU. Press V or v to select the “Channel Setup” Channel Setup icon ( ), then press...
  • Page 121 Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. Manual Program Program: (1) Make sure “Program” is selected, then press TV System: VHF Low Fine: Auto (2) Press V or v until the program number you want Skip: to preset appears on the menu, then press Select...

  • Page 122: Changing The "Setup" Setting

    x Changing the “Setup” setting The “Setup” menu allows you to change the menu language, adjust the picture position, change the picture size, label the connected equipment and select the color system. Press MENU. Press V or v to select the “Setup” icon ( Setup Language: English...

  • Page 123: Additional Information

    Additional Information x Connecting optional components Connecting to the video input terminal ( t ) TV front panel (MONO) Camcorder Audio/Video cable (not supplied) TV rear panel Video game equipment Antenna cable (not supplied) Audio/Video cable (not supplied) Notes • If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the program number 0 on the TV (see page 21).
  • Page 124 continued Connecting to the component video input terminal ( TV rear panel Component video cable (not supplied) DVD player Audio cable (not supplied) Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV.

  • Page 125: Troubleshooting

    • The antenna setup is • Check the antenna setup. – inappropriate. Contact a Sony dealer for advice. Noisy sound • Channel presetting is • Display the “Channel Setup” menu and inappropriate or select “Manual Program” to preset the incomplete.
  • Page 126 • There is local – stripes equipment near the TV. interference from cars, neon signs, hair dryers, • Check the antenna setup. Contact a Sony – power generators, etc. dealer for advice. – Double images or • Use a highly directional antenna.
  • Page 127 Teletext display is on the TV, VCR, and at the wall. incomplete the cable is damaged. (snowy picture or double images) • The antenna setup is • Check the antenna setup. Contact a Sony – (KV-XR34M81/ inappropriate. dealer for advice. XR29M81/ –...

  • Page 128: Specifications

    Measured diagonally Screen size (cm) Measured diagonally 895 × 674 × 590 772 × 576 × 516 696 × 513 × 499 Dimensions (w/h/d, mm) Mass (kg) Design and specifications are subject to change without notice. Sony Corporation Additional Information...
  • Page 129 4-101-845-12 (1) Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-XR29 © 2003 Sony Corporation...
  • Page 130 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
  • Page 131 Unplug the TV before moving it or if you are not bottom area of the TV. going to use it for several days. Made in Malaysia. Sony Corporation 6-7-35 Kitashinagawa, Shinagawa-ku, Tokyo, 141-0001 Japan.
  • Page 132 x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. (1) Put a cord or chain through the clamps.
  • Page 133 Table of Contents Menu Adjustment Installation Getting Started ........6 Introducing the menu system ..12 Setting up your TV Changing the “Picture” setting ..15 (“Initial Setup”) ........7 Changing the “Sound” setting ..16 Changing the “Timer” setting ..18 Overview of Controls Changing the “Channel Setup”...

  • Page 134: Installation

    Installation x Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •...

  • Page 135: Setting Up Your Tv ("Initial Setup")

    x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically and adjust the picture position using the buttons on the TV front panel. and V/v/B/b buttons on the remote control can also be used for the •...

  • Page 136: Overview Of Controls

    Overview of Controls TV front and rear panels TV rear panel L(MONO) ENTER SELECT MENU AUTO PROGR PROGR qf qd TV front panel L(MONO) AUTO PROG:Press [MENU] for 5sec SOUND MENU MODE (AUTO PROG) PROG Button/Terminal Function Page Remote control sensor. –...

  • Page 137: Using The Remote Control And Basic Functions

    Using the remote control and basic functions PROG MENU RESET Button Description Page Turn off temporarily or turn on the TV. – Display the TV program. – Jump to previous program number. – PROG +/– Select program number. – 2 +/– Adjust volume.
  • Page 138 continued Button Description Page Select sound mode options. 5-Band Graphic Equalizer display will appear. Select picture mode options. Menu operations MENU Display or cancel the menu. Confirm selected items. V, v, B, b Select and adjust items. Timer operations Set TV to turn on automatically. –...

  • Page 139: Advanced Operations

    Advanced Operations Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Personal” option. Selecting the picture mode Press to select the desired picture mode. Select To view “Dynamic”...

  • Page 140: Menu Adjustment

    Menu Adjustment x Introducing the menu system The MENU button lets you open a menu and change the settings of your TV. The following is an overview of the menu system. Return icon Picture icon Name of the current Sound icon Setup menu Language:...
  • Page 141 Level 1 Level 3/Function Page Level 2 Set TV to turn off automatically. “Timer” “Sleep Timer” Set TV to turn on automatically. “Wake Up Timer” Preset channels automatically. “Channel Setup” “Auto Program” Preset channels manually. “Manual Program” Select the TV system: “TV System”...
  • Page 142 continued How to use the menu PROG Picture Press MENU to Mode: Dynamic Picture Adjustment display the menu. Color Temperature: Cool High MENU Intelligent Picture: Select Confirm RESET Press V or v to select the desired item. Channel Setup Auto Program Manual Program TV System: Program Label...

  • Page 143: Changing The "Picture" Setting

    x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press MENU. Make sure the “Picture” icon ( ) is Picture selected, then press Mode: Dynamic Picture Adjustment Color Temperature: Cool High Intelligent Picture: Select Confirm Press V or v to select the desired item (e.g., “Mode”), then press Select...

  • Page 144: Changing The "Sound" Setting

    x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press MENU. Press V or v to select the “Sound” icon ( Sound Mode: Dynamic then press Sound Adjustment Balance Intelligent Volume: Surround: Select Confirm Press V or v to select the desired item (e.g., “Mode”), then press Select “Mode”...
  • Page 145 Adjusting the “Sound Adjustment” item under “Personal” mode The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of “Personal” mode in the menu. Make sure that “Adjust” is selected, Adjustment: Personal then press Adjust Reset Selecting “Reset” will set your TV to the factory setting.

  • Page 146: Changing The "Timer" Setting

    x Changing the “Timer” setting The “Timer” menu allows you to set TV to turn off and turn on automatically. Press MENU. Press V or v to select the “Timer” icon ( ), Timer then press Sleep Timer: Wake Up Timer: Select Confirm Press V or v to select the desired item (e.g., “Sleep Timer”), then press...

  • Page 147: Changing The "Channel Setup" Setting

    x Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels, select the TV system, label the program number and block unwanted programs. Press MENU. Press V or v to select the “Channel Setup” Channel Setup icon ( ), then press...
  • Page 148 continued Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. Manual Program Program: (1) Make sure “Program” is selected, then press TV System: VHF Low (2) Press V or v until the program number you want Fine: Auto Skip:...

  • Page 149: Changing The "Setup" Setting

    x Changing the “Setup” setting The “Setup” menu allows you to change the menu language, adjust the picture position, change the picture size, label the connected equipment and select the color system. Press MENU. Press V or v to select the “Setup” icon ( Setup then press Language:...

  • Page 150: Additional Informations

    Additional Information x Connecting optional components Connecting to the video input terminal ( t ) TV front panel Audio/Video cable (not supplied) (MONO) Camcorder Video game TV rear panel equipment Antenna cable (not supplied) Audio/Video cable (not supplied) Notes • If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the program number 0 on the TV (see page 20).
  • Page 151 Connecting to the component video input terminal ( TV rear panel Component video cable (not supplied) DVD player Audio cable (not supplied) Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV.

  • Page 152: Troubleshooting

    • The antenna setup is • Check the antenna setup. – inappropriate. Contact a Sony dealer for advice. Noisy sound • Channel presetting is • Display the “Channel Setup” menu and inappropriate or select “Manual Program” to preset the incomplete.
  • Page 153 Dotted lines or interference from cars, equipment near the TV. stripes neon signs, hair dryers, • Check the antenna setup. Contact a Sony – power generators, etc. dealer for advice. • Broadcast signals are • Use a highly directional antenna.
  • Page 154 (standby) indicator flashes. Press ! function indicates the TV flashes red (main power) to turn off your TV. possible problems. several times after Contact your nearest Sony service every three center. seconds. • Changes in room TV cabinet temperature sometimes creaks.

  • Page 155: Specifications

    Stereo minijack i (Headphone) 29 in. Picture tube Measured Tube size (cm) diagonally Screen size (cm) Measured diagonally Dimensions (w/h/d, mm) 772 x 576 x 516 Mass (kg) Design and specifications are subject to change without notice. Sony Corporation Additional Information...

This manual is also suitable for:

Trinitron kv-xr29m80

Table of Contents