Download Print this page
Coleman 2000007829 Setup Instructions
Coleman 2000007829 Setup Instructions

Coleman 2000007829 Setup Instructions

Shelter

Advertisement

Quick Links

Before you begin
• Read all instructions before set up.
• Select a level site clear of rocks, branches, and other hard or
sharp objects, to install your shelter.
WARNING: Keep clear of overhead power lines.
• Do not set up your shelter under trees because of potential
lightning strikes or falling tree limbs in inclement weather.
• Secure with all stakes and guylines provided to prevent property
damage or personal injury.
• For best results in windy conditions, position narrow end of
shelter into the wind.
• Do not drop shelter.
• Do not bounce shelter bag on its end to remove shelter, as these
actions may damage the frame.
• THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO
PEOPLE TO ASSEMBLE.
• Under no circumstances should this product be used to cover
automobiles, marine products or similar items.
CAUTION: Avoid pinch points when opening and closing the
shelter frame.
1
Extend the Shelter Frame
• With two persons standing at diagonal corners of the
structure, grab the leg, and pull out to unfold
frame. (Fig. 1)
NOTE: Do not unfold frame completely. This will allow
easier fit for draping shelter top over frame.
Fig. 1
2
Set up the Shelter
• Drape shelter top over frame. (Fig. 2)
• Attach hook and loop fasteners, located on corners of
shelter top, to four corners of frame post. (Fig. 2A)
• Secure shelter top to frame by attaching clips to frame
post. (Fig. 2B)
Fig. 2
sHELTER sETUP INsTRUCTIONs
2A
2B
MODEL 2000007829
• Pull up sliding bracket located
on upper portion of leg until
push button snaps into place.
(Fig. 3) This will ensure top of
frame is fully extended.
HANDY TIP: To fully engage the
push button, grip the top and
bottom frame members and
squeeze as shown in Fig. 3A. Be
careful to avoid pinch points.
• Secure shelter top to frame with hook & loop fasteners provided.
(Fig. 4 & 5)
Fig. 4
3
Adjust the Height
• Adjust desired height until push button locks into place,
making sure all four posts are level. (Fig. 6 & 7)
Push
Button
Fig. 6
4
Stake the Shelter
• Secure shelter by driving stakes through the holes in the
base of each frame post. (Fig. 8)
Fig. 8
Push Button
Fig. 3
Fig. 3A
Fig. 5
Upper
Portion
of Leg
Push
Button
Fig. 7
(continued on other side)

Advertisement

loading

Summary of Contents for Coleman 2000007829

  • Page 1 INsTRUCTIONs MODEL 2000007829 Before you begin • Pull up sliding bracket located on upper portion of leg until • Read all instructions before set up. push button snaps into place. • Select a level site clear of rocks, branches, and other hard or (Fig.
  • Page 2 • This product is not intended to be used during heavy rain, wind, hail, snow or other inclement weather. Excess water build-up © 2010 The Coleman Company, Inc. All rights reserved. Coleman , and are registered trademarks of can cause the frame system to be come unstable, and possibly ® The Coleman Company, Inc. collapse, causing injury. 4010009477 (ECN20014620-02)