D-Link Xtreme N Duo DAP-1522 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Hardware
  5. xtreme n duo dap-1522
  6. User manual

D-Link Xtreme N Duo DAP-1522 User Manual

Wireless bridge
Hide thumbs Also See for Xtreme N Duo DAP-1522:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for D-Link Xtreme N Duo DAP-1522

Summary of Contents for D-Link Xtreme N Duo DAP-1522

  • Page 2: Table Of Contents

    Setup Wizard ........... 49 DHCP ............26 Wireless ............57 Static IP ............27 Wireless MAC Cloning ........... 58 Advanced ............... 28 Network Settings ..........59 MAC Address Filter .......... 28 Static ............59 Advanced Wireless .......... 29 D-Link DAP-15 User Manual...
  • Page 3 Configure WPA-Enterprise (AP Mode) ....77 Configure WEP (Bridge Mode) ......78 Configure WPA-Personal (Bridge Mode) ....79 Connect to a Wireless Network ........ 80 Using Windows XP ..........80 ® Configure WEP ............81 Configure WPA-PSK ..........83 D-Link DAP-15 User Manual...

  • Page 4: Product Overview

    • CAT5 Ethernet Cable • Rubber Feet • CD-ROM with User Manual Note: Using a power supply with a different voltage than the one included with the DAP-1522 will cause damage and void the warranty for this product. System Requirements •...

  • Page 5: Introduction

    ULTIMATE PERFORMANCE The D-Link Xtreme N™ Duo Wireless Bridge (DAP-1522) is a draft 802.11n compliant device that delivers real world performance of up to 650% faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet connection). Create a secure wireless network to share photos, files, music, video, printers, and network storage throughout your home.

  • Page 6: Features

    650% faster than 802.11g. • Compatible with 802.11a, 802.11b, and 802.11g Devices - The DAP-1522 is still fully compatible with the IEEE 802.11a/b/g standard, so it can connect with existing 802.11a/b/g PCI, USB, and Cardbus adapters.

  • Page 7: Hardware Overview

    AP, Auto, or Bridge mode. LAN Ports (1-4) Power Receptor Connect Ethernet devices such as computers, Receptor for the supplied power switches, game consoles, setup boxes and hubs. adapter. D-Link DAP-15 User Manual...

  • Page 8: Leds

    LEDs AP LED Bridge LED A blinking light indicates that the A blinking light indicates that the DAP-1522 is in AP mode. DAP-1522 is in bridge mode LAN LEDs Power LED A solid light indicates a connection to an A solid light indicates a proper connection Ethernet-enabled device on ports 1-4.

  • Page 9: Installation

    Section  - Installation Installation This section will walk you through the installation process. Placement of the DAP-1522 is very important. Do not place the DAP-1522 in an enclosed area such as a closet, cabinet, or in the attic or garage.

  • Page 10: Wireless Installation Considerations

    1. Keep the number of walls and ceilings between the D-Link access point and other network devices to a minimum. Each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

  • Page 11: Ap/Bridge/Auto Mode

    Section  - Installation AP/Bridge/Auto Mode Depending on how you want to use your DAP-1522 will determine which mode you use. This section will help you figure out which setting works with your setup. AP Mode If you already have a wired or wireless router, and want to add a MediaBand (5GHz wireless), to your network, you will need to move the switch on the back panel of the DAP-1522 to “AP”.
  • Page 12 Auto Mode If the switch on the back panel of the DAP-1522 is set to “Auto”, the device will wait for 30 seconds, looking for a DHCP server from the ethernet ports. If an IP address is assigned, it will automatically shift to AP mode. If an IP address is not assigned from a DHCP server, the DAP-1522 will automatically shift to Bridge mode.

  • Page 13: Configuration For Ap Mode

    Section  - Configuration Configuration for AP Mode This section will show you how to configure your new D-Link wireless access point using the web-based configuration utility. Web-based Configuration Utility To access the configuration utility, open a web browser such as Internet Explorer and enter dlinkap or 192.168.0.50 in the address field.

  • Page 14: Setup Wizard

    To set up your wireless network, click Add Wireless Device With WPS and skip to page 22. If you want to enter your settings without running the wizard, click Manual Wireless Network Setup and skip to page 24. D-Link DAP-15 User Manual...

  • Page 15: Wireless Setup Wizard

    Enter the Device Name of the AP and click Next to continue. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. If you want to change the admin account password, enter a new password and click Next.
  • Page 16 Section  - Configuration Select Auto as the configuration method only if your wireless device supports Wi-Fi Protected Setup. Skip to page 17 for Manual configuration. Click Next to continue. Click Save to save your network settings. D-Link DAP-15 User Manual...
  • Page 17 Section  - Configuration The following screen opens to indicate that you have successfully saved your new settings. Select Manual as the configuration method to set up your network manually. Click Next to continue. D-Link DAP-15 User Manual...
  • Page 18 To Manually assign a network key, skip to page 19. Click Next to continue. If you choose WPA-PSK encryption, the following screen will show you your Network Key to enter on your wireless clients. Click Save to finish the Setup Wizard. D-Link DAP-15 User Manual...
  • Page 19 If you choose WEP encryption, the following screen will show you your Network Key to enter on your wireless clients. Click Save to finish the Setup Wizard. Choose Manually assign a network key to create you own key. Click Next to continue. D-Link DAP-15 User Manual...
  • Page 20 63 characters long or enter exactly 64 characters using 0-9 and A-F. Click Next to continue. If you select WPA encryption, the following screen will show you your network key to enter on your wireless clients. Click Save to finish the Setup Wizard. D-Link DAP-15 User Manual...
  • Page 21 13 characters long or exactly 10 or 26 characters using 0-9 and A-F. Click Next to continue. If you select WEP encryption, the following screen will show you your network key to enter on your wireless clients. Click Save to finish the Setup Wizard. D-Link DAP-15 User Manual...

  • Page 22: Add Wireless Device With Wps

    Select PIN to use your PIN number from your wireless device to connect to your network. For PBC configuration, skip to page 23. Click Connect to continue. Start WPS on the wireless device you are adding to you wireless network to complete the setup. D-Link DAP-15 User Manual...
  • Page 23 Select PBC to use the Push Button Configuration in order to connect to your network. Click Connect to continue. Press down the Push Button on the wireless device that you are adding to your network to complete the setup. D-Link DAP-15 User Manual...

  • Page 24: Manual Configuration

    Mixed 802.11g and 802.11b - Select if you are using a mix of 802.11g and 11b wireless clients. Mixed 802.11n and 802.11g - Select if you are using a mix of 802.11n and 11g wireless clients. If you choose 5GHz band, then select either 802.11a Only, 802.11n Only, or Mixed 802.11n and 802.11a. D-Link DAP-15 User Manual...
  • Page 25 Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DAP-1522. If Invisible is Status: selected, the SSID of the DAP-1522 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DAP-1522 in order to connect to it.

  • Page 26: Network Settings

    (DHCP) to automatically obtain an IP address on the LAN/private network. Device Name: Enter the Device Name of the AP. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. D-Link DAP-15 User Manual...

  • Page 27: Static Ip

    Default Gateway: Enter the Gateway assigned by your ISP. Device Name: Enter the Device Name of the AP. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. D-Link DAP-15 User Manual...

  • Page 28: Advanced

    This parameter allows you to manually add a MAC Filtering Rule: filtering rule. Click the Add button to add the new MAC filtering rule to the MAC Filtering Rules list at the bottom of this screen. D-Link DAP-15 User Manual...

  • Page 29: Advanced Wireless

    Check this box to reduce the guard interval time therefore increasing the data capacity. However, it is less reliable and may create higher data loss. IGMP Snooping: This enables IGMP snooping for the wireless connection. We recommend enabling this if you often use multicast services such as video conferencing and streaming audio/video. D-Link DAP-15 User Manual...

  • Page 30: Wlan Partition

    Ethernet access to your WLAN. Internal Use the drop-down menu to either Allow or Deny Station internal station connection. Connection: Ethernet Use the drop-down menu to either Allow or Deny to WLAN Ethernet to Wireless LAN access. Access: D-Link DAP-15 User Manual...

  • Page 31: Dhcp Server

    DHCP Server DHCP stands for Dynamic Host Control Protocol. The DAP-1522 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.”...

  • Page 32: Dhcp Reservation

    IP Address: Enter the IP address you want to assign to the computer or device. This IP Address must be within the DHCP IP Address Range. MAC Address: Enter the MAC address of the computer or device. D-Link DAP-15 User Manual...

  • Page 33: Qos

    There are four priority levels for all LAN ports. The Port: priority level values assigned are 1 for Background, 3 for Best Effort, 5 for Video, and 7 for Voice (Voice is the highest level and Background is the lowest level) at a normal priority. D-Link DAP-15 User Manual...
  • Page 34 Users can treat the two speeds as system transmission bandwidth, where all applications will share the whole system bandwidth based on assigned priorities. Note that the maximum amount of bandwidth that can be used is the same as the set value of both speeds. D-Link DAP-15 User Manual...

  • Page 35: Traffic Manager

    Ethernet to This section allows the user to indicate the device’s Wireless: maximum bandwidth from Ethernet to wireless. Wireless to This section allows the user to indicate the device’s Ethernet: maximum bandwidth from wireless to Ethernet. D-Link DAP-15 User Manual...

  • Page 36: Add Traffic Manager Rule

    Ethernet to wireless speed. Users can treat the two speeds as system transmission bandwidth, where all applications will share the whole system bandwidth based on assigned priorities. Note that the maximum amount of bandwidth that can be used is the same as the set value of both speeds. D-Link DAP-15 User Manual...

  • Page 37: Schedule

    Save Settings at the top for your schedules to go into effect. Schedule Rules The list of schedules will be listed here. Click the List: Edit icon to make changes or click the Delete icon to remove the schedule. D-Link DAP-15 User Manual...

  • Page 38: Maintenance

    Enter a new password for the Administrator Login Name. The administrator can make changes to the settings. Verify Enter the same password that you entered in the Password: previous textbox in order to confirm its accuracy. D-Link DAP-15 User Manual...

  • Page 39: Time

    To manually input the time, enter the values in these Time: fields for the Year, Month, Day, Hour, Minute, and Second and then click Save Settings. You can also click the Copy Your Computer’s Time Settings button at the bottom of the screen. D-Link DAP-15 User Manual...

  • Page 40: System

    Note: Restoring the factory default settings will not reset the Wi-Fi Protected Status to Not Configured. Reboot the Click to reboot the access point. Device: Clear Language Click to clear the language pack. This will put the Pack: web UI back to English. D-Link DAP-15 User Manual...

  • Page 41: Language Pack

    You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website for firmware updates at http://support.dlink.com.
  • Page 42 Section  - Configuration If you load a language pack and would like to go back to English, click Maintenance > System and click on Clear next to Clear Language Pack. D-Link DAP-15 User Manual...

  • Page 43: Status

    Section  - Configuration Status Device Info This page displays the current information for the DAP-1522. It will display the LAN and wireless LAN information. General: Displays the access point’s time and firmware version. LAN: Displays the MAC address and the private (local) IP settings for the access point.

  • Page 44: Wireless

    Signal quality can be reduced by distance, by interference from other radio-frequency sources (such as cordless telephones or neighboring wireless networks), and by obstacles between the access point and the wireless device. D-Link DAP-15 User Manual...

  • Page 45: Logs

    Updates the log details on the screen so it displays any recent activity. Clear: Clear all of the log contents. Save Log: This option will save the access point to a log file on your computer. D-Link DAP-15 User Manual...

  • Page 46: Statistics

    TX Bytes: Displays the number of bytes that were sent from the access point. RX Bytes: Displays the number of bytes that were received by the access point. D-Link DAP-15 User Manual...

  • Page 47: Help

    Section  - Configuration Help D-Link DAP-15 User Manual...

  • Page 48: Configuration For Bridge Mode

    Section  - Configuration Configuration for Bridge Mode This section will show you how to configure your new D-Link wireless MediaBridge using the web-based configuration utility. Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter dlinkap or enter 192.168.0.50 in the address field.

  • Page 49: Setup Wizard

    Click Launch Wireless Setup Wizard Enter the Device Name of the AP and click Next to continue. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. D-Link DAP-15 User Manual...
  • Page 50 If you want to change the admin account password, enter a new password and click Next. Select Auto configuration if you want to use Wi-Fi Protected Setup. If you want to set up your network manually, skip to page Click Next to continue. D-Link DAP-15 User Manual...
  • Page 51 For PBC configuration, skip to page 52. Enter the PIN number used into you access point and click Connect. Start WPS on the wireless device you are adding to you wireless network to complete the setup. D-Link DAP-15 User Manual...
  • Page 52 Select PBC to use the Push Button Configuration to connect to your network. Click Connect to continue. Press down the Push Button on the wireless device you are adding to your network to complete the setup. D-Link DAP-15 User Manual...
  • Page 53 Select Manual configuration to set up your network manually. Click Next to continue. Enter the Wireless Network Name of the AP or click the Site Survey button to find the AP. Click Next to continue on to page 54. D-Link DAP-15 User Manual...
  • Page 54 If you clicked on Site Survey, the following screen will be displayed. Find your access point from the list and click Connect to complete the Setup Wizard. Choose which Security Mode you want to use and click Next to continue. D-Link DAP-15 User Manual...
  • Page 55 Section  - Configuration If you choose WEP, enter the wireless security password and click Next to complete the Setup Wizard. If you choose WPA, enter the WPA Personal Passphrase and click Next to complete the Setup Wizard. D-Link DAP-15 User Manual...
  • Page 56 Section  - Configuration If you choose WPA2, enter the WPA2 Personal Passphrase and click Next to complete the Setup Wizard. The following screen opens to indicate that you have successfully saved your new settings. . D-Link DAP-15 User Manual...

  • Page 57: Wireless

    This option is unavailable in Bridge Mode. Enable Auto The Auto Channel Scan setting is used to allow the Channel Scan: DAP-1522 to choose the channel with the least amount of interference. This option is unavailable in Bridge Mode. Wireless Indicates the channel setting for the DAP-1522.

  • Page 58: Wireless Mac Cloning

    Wireless MAC Cloning Enabling this option allows the user to manually assign the source MAC address to packets forwarded by the DAP-1522. If not manually assigned, the packet’s source MAC address field will be automatically selected as the DAP-1522’s MAC address.

  • Page 59: Network Settings

    Enter the Gateway assigned by your ISP. Gateway: Device Name: Enter the Device Name of the AP and click Next to continue. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. D-Link DAP-15 User Manual...

  • Page 60: Dhcp

    LAN/private network. Device Name: Enter the Device Name of the AP and click Next to continue. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. D-Link DAP-15 User Manual...

  • Page 61: Advanced

    2346 is the default setting. Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it is less reliable and may create higher data loss. D-Link DAP-15 User Manual...

  • Page 62: Qos

    There are four priority levels for all LAN ports. The Port: priority level values assigned are 1 for Background, 3 for Best Effort, 5 for Video, and 7 for Voice (Voice is the highest level and Background is the lowest level) at a normal priority. D-Link DAP-15 User Manual...
  • Page 63 Users can treat the two speeds as system transmission bandwidth, where all applications will share the whole system bandwidth based on assigned priorities. Note that the maximum amount of bandwidth that can be used is the same as the set value of both speeds. D-Link DAP-15 User Manual...

  • Page 64: Schedule

    Save Settings at the top for your schedules to go into effect. Schedule Rules The list of schedules will be listed here. Click the List: Edit icon to make changes or click the Delete icon to remove the schedule. D-Link DAP-15 User Manual...

  • Page 65: Maintenance

    Enter a new password for the Administrator Login Password: Name. The administrator can make changes to the settings. Enter the same password that you entered in the Verify previous textbox in order to confirm its accuracy. Password: D-Link DAP-15 User Manual...

  • Page 66: Time

    To manually input the time, enter the values in these Time: fields for the Year, Month, Day, Hour, Minute, and Second and then click Save Settings. You can also click the Copy Your Computer’s Time Settings button at the bottom of the screen. D-Link DAP-15 User Manual...

  • Page 67: System

    Save button above. Reboot The Click to reboot the bridge. Device: Clear Click to clear the language pack. This will put the web UI back to English. Language Pack: D-Link DAP-15 User Manual...

  • Page 68: Language Pack

    You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com.
  • Page 69 Section  - Configuration If you load a language pack and would like to go back to English, click Maintenance > System and click on Clear next to Clear Language Pack. D-Link DAP-15 User Manual...

  • Page 70: Status

    Section  - Configuration Status Device Info This page displays the current information for the DAP-1522. It will display the LAN and wireless LAN information. General: Displays the access point’s time and firmware version. LAN: Displays the MAC address and the private (local) IP settings for the access point.

  • Page 71: Logs

    Updates the log details on the screen so it displays any recent activity. Clear: This option clears all of the log contents. Save Log: This option will save the access point to a log file on your computer. D-Link DAP-15 User Manual...

  • Page 72: Help

    Section  - Configuration Help D-Link DAP-15 User Manual...

  • Page 73: Wireless Security

    Section  - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DAP-1522 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key) •...

  • Page 74: What Is Wpa

    WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DAP-15 User Manual...

  • Page 75: Configure Wep In Ap Mode

    6. Click Save Settings at the top of the window to save your settings. If you are configuring the access point with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the access point. D-Link DAP-15 User Manual...

  • Page 76: Configure Wpa-Personal (Ap Mode)

    If you are configuring the access point with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the access point. D-Link DAP-15 User Manual...

  • Page 77: Configure Wpa-Enterprise (Ap Mode)

    7. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 1812 is the default port. 8. Next to RADIUS Server Shared Secret, enter the security key. Click Save Settings at the top of the window to save your settings. . 9. Click D-Link DAP-15 User Manual...

  • Page 78: Configure Wep (Bridge Mode)

    6. Click Save Settings to save your settings. If you are configuring the access point with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the access point. D-Link DAP-15 User Manual...

  • Page 79: Configure Wpa-Personal (Bridge Mode)

    If you are configuring the access point with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the access point. D-Link DAP-15 User Manual...

  • Page 80: Connect To A Wireless Network

    Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal, but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DAP-15 User Manual...

  • Page 81: Configure Wep

    XP Wireless Utility by right-clicking ® on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DAP-15 User Manual...
  • Page 82 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WEP settings are correct. The WEP key must be exactly the same as on the wireless access point. D-Link DAP-15 User Manual...

  • Page 83: Configure Wpa-Psk

    XP Wireless Utility by right-clicking ® on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DAP-15 User Manual...
  • Page 84 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless access point. D-Link DAP-15 User Manual...

  • Page 85: Connect To A Wireless Network

    Network and Sharing Center. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) under Select a network to connect to and then click the Connect button. D-Link DAP-15 User Manual...
  • Page 86 The utility will display the following window to indicate a connection is being made. The final window indicates the establishment of a successful connection. The next two pages display the windows used to connect to either a WEP or a WPA-PSK wireless network. D-Link DAP-15 User Manual...

  • Page 87: Configure Wep

    Click on a network (displayed using the SSID) using WEP under Select a network to connect to and then click the Connect button. Enter the appropriate security key or passphrase in the field provided and then click the Connect button. D-Link DAP-15 User Manual...

  • Page 88: Configure Wpa-Psk

    Click on a network (displayed using the SSID) using WPA-PSK under Select a network to connect to and then click the Connect button. Enter the appropriate security key or passphrase in the field provided and then click the Connect button. D-Link DAP-15 User Manual...

  • Page 89: Troubleshooting

    Section  - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-1522. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows XP. If you have ®...
  • Page 90 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link access point in the address bar. This should open the login page for your the web management.
  • Page 91 ® ® and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DAP-15 User Manual...
  • Page 92 • To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DAP-15 User Manual...

  • Page 93: Wireless Basics

    Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.

  • Page 94: What Is Wireless

    D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work? Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B.
  • Page 95 Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access •...

  • Page 96: Tips

    The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.

  • Page 97: Wireless Modes

    An Infrastructure network contains an Access Point or wireless bridge. All the wireless devices, or clients, will connect to the wireless bridge or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DAP-15 User Manual...

  • Page 98: Networking Basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 99: Statically Assign An Ip Address

    2000 - From the desktop, right-click My Network Places > Properties. ® Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your access point.

  • Page 100: Technical Specifications

    Environmental conditions will adversely affect wireless signal range. Range varies depending on country’s regulation. The DAP-1522 doesn’t include 5.25-5.35GHz & 5.47~5.725GHz. D-Link DAP-15 User Manual...

  • Page 101: Contacting Technical Support

    • Hardware Revision (located on the label on the bottom of the access point (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the access point). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.

  • Page 102: Warranty

    Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
  • Page 103 Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link;...
  • Page 104 • The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped to D-Link Systems, Inc., 17595 Mt.

  • Page 105: Limitation Of Liability

    RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.

  • Page 106: Federal Communication Commission Interference Statement

    This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. D-Link DAP-15 User Manual...

  • Page 107: Industry Canada Statement

    The firmware setting is not accessible by the end user. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. D-Link DAP-15 User Manual...

  • Page 108: Registration

    Appendix F - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.2 January 7, 2009 D-Link DAP-15 User Manual...

Table of Contents