Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
34° angle
finish nailer
REV 12b
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2010 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SaVE thiS manual.
ITEM 68020
Advertisement
Table of Contents
Related Manuals for CentralPneumatic 68020
Summary of Contents for CentralPneumatic 68020
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SaVE thiS manual.
-
Page 2: Table Of Contents
National pipe thread, straight NIOSH-approved dust mask/respirator. WARNING marking concerning WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved Risk of Explosion. safety goggles with side shields. table a: Symbol Definitions Page 2 For technical questions, please call 1-800-444-3353. Item 68020... -
Page 3: Work Area
A dust mask, non-skid safety shoes and finger on trigger, the tool is able to fire a fastener. a hard hat must be used for the applicable conditions. Wear heavy-duty work gloves during use. Item 68020 For technical questions, please call 1-800-444-3353. Page 3... -
Page 4: Tool Use And Care
Always verify prior to using the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range. SaVE thESE inStRuCtiOnS. Page 4 For technical questions, please call 1-800-444-3353. Item 68020... - Page 5 17. Keep clear of the workpiece near the area being fastened. Fasteners may bend sideways during firing, causing them to exit the workpiece at an unexpected point, causing personal injury. Item 68020 For technical questions, please call 1-800-444-3353. Page 5...
-
Page 6: Specifications
(55) tRiGGER (41) PuShER (75) Safety nosepiece - Also called the workpiece contact, the Safety Nosepiece helps prevent the tool from firing unless it is pressed against an object. Page 6 For technical questions, please call 1-800-444-3353. Item 68020... -
Page 7: Setup
3. The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. Item 68020 For technical questions, please call 1-800-444-3353. Page 7... - Page 8 Page 8 For technical questions, please call 1-800-444-3353. Item 68020...
- Page 9 Item 68020 For technical questions, please call 1-800-444-3353. Page 9...
-
Page 10: Operation
(fire). repaired by a qualified service technician. If it fails to act in the manner explained in bold, have it repaired by a qualified service technician. Page 10 For technical questions, please call 1-800-444-3353. Item 68020... -
Page 11: Loading The Tool
Store indoors out of children’s reach. is helpful when precise fastener placement is required. Also, it may reduce the possibility of injury to you or to others working with you. Item 68020 For technical questions, please call 1-800-444-3353. Page 11... -
Page 12: Maintenance
Use a screwdriver to release the jammed fastener by probing the openings in the magazine. 4. If the jam cannot be cleared using the method above, have the tool serviced by a qualified technician. Page 12 For technical questions, please call 1-800-444-3353. Item 68020... -
Page 13: Troubleshooting
3. Replace damaged components. 4. Dirty, worn or damaged valve. 4. Clean or replace valve assembly. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. Item 68020 For technical questions, please call 1-800-444-3353. Page 13... -
Page 14: Parts List And Diagram
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-800-444-3353. Item 68020... - Page 15 Diagram Item 68020 For technical questions, please call 1-800-444-3353. Page 15...
-
Page 16: Warranty
90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.