Auger/Blower
inspection
Check
the
auger,
auger
housing,
blower
and shear
bolts for signs of
damage or other faults. If any of the shear bolts are broken,
replace them
with the one furnished
with the snowblower.
Additional
shear bolts and
nuts are available from authorized
Honda snowblower
dealers.
Shear
bolts
are designed
to break
under
force
that
would
otherwise
damage auger and blower
parts. Do not replace shear bolts with ordinary
hardware
bolts.
Shear bolt replacement
procedure
1. Place the showblower
on a firm, level surface.
2. Turn the engine switch OFF and remove the cap from the spark plug.
3. Clean the auger and blower of snow, ice or any other foreign particles.
4. Check the entire snow clearing mechanism.
5. Replace any broken shear bolts.
Tighten securely.
BLOWER SHEAR BOLT
6mm SELF NUT
6mm HEX NUT (2)
AUGER SHEAR BOLT (2)
41