Summary of Contents for Pico Macom MOR Series
- Page 1 Series Headend Equipment Racks and Shelves Installation and Operation Manual Operation www.picomacom.com Ph: 800-421-6511 Manual Rev. 06/03...
-
Page 2: Important Safety Instructions
To insure proper installation and operation, take a moment to read this guide before proceeding with the installation. If you have any questions or comments about the MOR Series Headend Equipment Racks and Shelves, please contact your dealer or have him contact the PICO MACOM Service Center at these phone numbers: 800-421-6511, 818-493-4300. - Page 3 Safeguards Series 11. Power Sources: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company. 12.
- Page 4 MOR-S1 shelf is designed to provide a solid support for small width consumer satellite RS310C spacing for universal receivers and CATV set top converters. The Pico Macom MOR-S6 equipment rack shelf compatibility is designed to provide a solid support for up to six consumer satellite receivers, CATV...
-
Page 5: Specifications
Specifications Series Headend Equipment Racks and Shelves MOR Equipment Racks MOR-S Universal Rack Shelf MOR-36 MOR-61 MOR-71 MOR-84 Dimensions: 19˝(L) x 12˝(D) x 3 ˝(H) Weight: 2.1 lbs. Height (H): ˝ ˝ ˝ ˝ Material: 16-Gauge Stamped Steel Weight: 26.8 lbs. 34 lbs. -
Page 6: Operation And Controls
Operation and Controls Series www.picomacom.com Ph: 800-421-6511 Rev. 06/03... -
Page 7: Installation Procedure
Installation Procedure Series Installation It is recommended that assistance be available to safely install equipment in equipment racks. Begin assembly of the rack by attaching the rail supports (2 pcs.) to the base. Attach the side rails (2 pcs.) to the rail supports. Attach the top brace (1 pc.) to the top ends of the side rails. -
Page 8: Limited Warranty
List Price of the loaner unit plus shipping costs. When you receive the loaner unit, pack the failed unit in the loaner unit’s box and ship it freight prepaid to Pico Macom for repair. When you receive the repaired unit, a new RMA number will be provided in the box. Carefully pack the loaner unit and affix the new RMA number on the box and ship it back to us for full credit excluding shipping costs.