By Intersection; Selecting The State Or Province; Selecting The City - Honda 2010 Accord Crosstour Owner's Manual

By Intersection

After you select Intersection from the
MENU screen (Enter destination by),
the display changes to:
Tip:
When entering an address, it is usually
easier to enter the street first. A city or
cities that the street appears in will be
displayed. For your convenience, you
do not have to enter both city and street.
NOTE:
• If you find that your city is not listed,
it may be part of a larger
metropolitan area. Try entering the
street first.
• Prior to departure, you can set areas
to avoid. The system then includes
them in its calculations for the
destination you have entered. See
Edit Avoid Area on page 91.

Selecting the State or Province

The state you are in is displayed at the
top of the screen. If your desired
destination is in another state, select
CHANGE STATE by moving the
Interface Dial down.
The display then changes to the Select
a state screen. Use the voice control
system and say the name of the state, or
rotate the Interface Dial knob to
select the state.
2010 Accord Crosstour
Entering a Destination

Selecting the City

This is helpful if the street runs through
several cities, and you know what city
includes the street. The city you are in is
displayed on the screen. If the city you
want is displayed on the screen, say
"Select current city." If your desired
destination is in another city, say or
enter another city.
By Voice Control:
Say "City" on the Find intersection by
screen, and the display changes to the
Say city name screen. Say the city
name and searching will begin.
Navigation System 35