Honda 2010 Accord Crosstour Owner's Manual page 134

Frequently Asked Questions
Problem
Daylight saving time occurred, but the navigation system did
not change time even though SETUP shows Auto Daylight
is ON.
The navigation system automatic daylight time feature is not
switching the navigation system clock on the correct dates.
Why is this?
The navigation system clock switched by one hour for no
apparent reason. What can cause this?
My battery was disconnected or went dead, and the
navigation system is asking for a code. Where do I find this
code?
I speak a language other than English. When will other
languages be available for the navigation system?
134 Navigation System
Go to the Clock adjustment screen in SETUP and select DST Selection.
Ensure that the correct DST schedule is selected. For more information, see
Clock Adjustment on page 94.
1) Go to the Clock adjustment screen in SETUP and ensure that Auto
Daylight is ON.
2) The navigation system is designed to switch to daylight saving time
according to the months selected in the DST schedule selection screen.
Ensure that the appropriate schedule is selected. For more information,
see Clock Adjustment on page 94.
1) You may be driving near a time zone boundary (see Auto Daylight on
page 95).
2) The navigation system does not switch between standard and daylight
saving time. Set Auto Daylight to ON on the Clock adjustment screen
in SETUP, and ensure that the correct month switching schedule is
chosen on the DST schedule selection screen. See page
information.
There should be a card in the glove box with the anti-theft code for the
navigation/audio system. This card contains the 4-digit security code and
serial number. If you cannot find it, your dealer can help you out.
This is being considered as a future enhancement.
2010 Accord Crosstour
Solution
95 for more