Initial System Start-Up; Adjusting Volume; Controllable With Remote Control; Setting Time - Alpine CDE-SXM145BT Reference Manual

Cd/usb/advanced bluetooth with siriusxm tuner; cd/usb receiver with advanced bluetooth; usb receiver with advanced bluetooth
Hide thumbs Also See for CDE-SXM145BT:
Table of Contents

Advertisement

Initial System Start-Up

Be sure to press the RESET button when using the unit for the first time,
after changing the car battery, etc.
1
Turn off the unit power.
2
Remove the detachable front panel.
3
Press RESET with a ballpoint pen or similar pointed object.
RESET button

Adjusting Volume

Turn the Rotary encoder until the desired sound is
obtained.

Setting Time

1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select GENERAL, and then
press ENTER.
*
AUDIO  GENERAL  DISPLAY  TUNER  SIRIUSXM
 iPod
 BLUETOOTH
* Displayed only when a siriusXM Tuner is
connected.(CDE-SXM145BT only).
3
Turn the Rotary encoder to select the CLOCK ADJ mode,
and then press ENTER.
The time indication will blink.
4
Turn the Rotary encoder to adjust the hours while the
time indication is blinking.
5
When the hour has been adjusted, press ENTER.
6
Turn the Rotary encoder to adjust the minutes while the
time indication is blinking.
7
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold ENTER for at least 2 seconds after
setting the “hour”. Minutes will reset to “00”. If the display shows over
“30” minutes when you do this, the time will advance one hour.
• Pressing r will return to the previous mode.
• Pressing and holding r for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
10
-EN

Controllable with Remote Control

This unit can be controlled with an optional Alpine remote control.
For details, consult your Alpine dealer. Point the optional remote
control transmitter at the remote-control sensor.
Remote control sensor
* The illustration is for CDE-SXM145BT/CDE-143BT.
Connectable to Remote Control Interface Box
With an optional Alpine Steering Wheel Remote Control Interface
Box (not included), this unit is controllable from the vehicles
steering wheel controls. For details, contact your Alpine dealer.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cde-143btUte-42bt

Table of Contents