Related Manuals for Haier XPB60-CS
Summary of Contents for Haier XPB60-CS
- Page 1 Twin-tub Washing Machine This manual is for XPB60-CS Please read this manual carefully before using. Retain it for future reference. The machine is for cold water connection only. User's manual 0030507957...
-
Page 2: Table Of Contents
Contents Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Midway spinning Rinsing Spinning Disposal after washing Trouble-Shooting Answer to questions Packing list Specification The 2nd cover The back cover... -
Page 3: Names Of The Parts
Names of the parts Buzzer Water-filling entrance Water inlet selector handle Wash selector Wash timer Control panel Overflow filter Water level adjusting lever Quick water-filling entrance Lint filter (Installed by user) Pulsator Wash tub Wash tub cover Meaning and description of the symbols Contents marked with that symbol are related Warning sign to the safety of the product and the personal... -
Page 4: Safety Precautions
Safety precautions Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector. Earth If the power cord is bad, to avoid risk it is required to replace it by the technicians of an after-sale service department. - Page 5 Safety precautions Do not put your hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine.
-
Page 6: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating of the machine. Install the lint filter After opening the package,please take out the lint filter from the document bag,install it to the overflow filter of the wash tub.See the figure. -
Page 7: Usage Of The Drain Hose
Installation and adjustment How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Extend the drain hose from the side of wash tub Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. -
Page 8: Preparation Before Washing
Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Before using , hang up the drain hose on suitable location. -
Page 9: The Musts In Washing
The musts in washing Usage of the detergent How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color. -
Page 10: Washing Sequence
Washing sequence Wash selector Wash timer (standard current, (To set to below 2 minute, strong current) first set to 6 minute then turn it back. it can increase the service life of the timer). Water inlet STRONG STANDARD DRAIN WASH SELECTOR WASH TIMER Wash 1.Water-filling selector... -
Page 11: Midway Spinning
Midway spinning Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Proper The laundries are slanting (2) Close the inner and outer cover of the spin tub. -
Page 12: Rinsing
Rinsing Rinsing Rinse with water-filling 1.Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously. 3.Rinse Adjust the wash timer to 5-7 minutes to do rinsing. -
Page 13: Spinning
Spinning Spinning 1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. -
Page 14: Disposal After Washing
Disposal after washing After using, please clean the lint and foreign materials from the lint filter and overflow filter each time. Otherwise it may affect the use of the machine. Please first pull out the power plug from the receptacle before cleaning. -
Page 15: Cleaning The Overflow Filter
Disposal after washing Cleaning the overflow filter Too much lint on the overflow filter will influence the normal usage of the machine. Please clean it every two months. 1 Take off the overflow filter. As indicated in the figure, nip the elastic fixing claw and pull it to the direction of the arrow to take it off.(See to Figure 1) - Page 16 Disposal after washing Disposal of the complete unit Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty Do not wash it directly by water After washing, dismount the water inlet hose. Do not store water in the tub for long period. Discharge the water immediately after each wash.
-
Page 17: Trouble-Shooting Answer To Questions
Trouble-shooting Answer to questions If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub, If the laundries fall to the outer side of the spin tub, please take them out immediately. - Page 18 Trouble-shooting Answer to questions (If there's break down, please pull out the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please call the after-sale service department of our company.
-
Page 19: Packing List
Packing list Name User's manual Warranty manual Water inlet hose Water-filling jointer Lint filter Gland Quantity One piece One piece One piece One piece One piece One piece... -
Page 20: Specification
Specification Maximum/43L Medium/36L Water level/Water quantity (about) Minimum/30L Injection pressure(MPa) 0.02-0.2 Rated washing / spinning capacity(kg) 6.0/5.0 (weight of standard dry cloth)