Mitsubishi Electric PUMY-P60NKMU Specifications

Job Name:
Schedule Reference:
OUTDOOR VRF SYSTEM FEATURES
•
zoning technology
• Inverter-driven (variable speed) compressor
• Total refrigerant piping length of 492' (150 m)
• Uses CITY MULTI indoor units and Controls Network
OPTIONAL PARTS
□ Branch Joint (T-Branch).......................................CMY-Y62-G-E
□ Header - Four-Branch.............................................CMY-Y64-G-E
□ Header - Eight-Branch.........................................CMY-Y68-G-E
□ Base Heater..................................................... PAC-SJ19BH-E
Nominal Cooling Capacity
Nominal Heating Capacity
Operating Temperature Range
External Dimensions (H x W x D)
Net Weight
Electrical Power Requirements
Cooling Power Input
Heating Power Input
Cooling Current
Heating Current
Minimum Circuit Ampacity (MCA)
Recommended Fuse/Breaker Size
Maximum Fuse Size
Piping Diameter (Brazed) (In. / mm)
Indoor Unit
Sound Pressure Levels
Fan
Type x Quantity
Compressor Operating Range
Compressor Type x Quantity
Compressor Motor Output
Refrigerant
Lubricant
High-pressure Protection Device
Compressor / Fan Protection Device
Inverter Protection Device
AHRI Ratings
(Ducted / Non-Ducted)
Blue Fin Anti-corrosion Protection: Cellulose- and polyurethane-resin coating treatment applied to condenser coil that protects it from air contaminants;
≥1μm thick; Salt Spray Test Method - no unusual rust development to 960 hours.
NOTES:
*1 If PKFY-P06/08 indoor units are connected, then range is 50° F ~ 115° F (10° C ~ 46° C).
SEACOAST PROTECTION
• External Panel Base, External Front Panel, Pillar: Alloyed galvanized-steel sheets with thermoset polyester-resin coating on internal and external surfaces
• Compressor Cover: Galvanized-aluminum sheets with thermoset polyester-resin coating on internal and external surfaces
• Electrical Parts Box: Galvanized-aluminum sheets with thermoset polyester-resin coating on external surface
• Fan Motor Support: Galvanized-steel sheets with thermoset polyester-resin coating on internal and external surfaces
• Printed Circuit Board: Epoxy resin with polyurethane-coating on external surface
PUMY-P60NKMU (-BS)
Model:
Unit Type
Btu/h
Btu/h
Cooling (Outdoor) *1
Heating (Outdoor)
In. / mm
Lbs. / kg
Voltage, Phase, Hertz
kW
kW
A
A
A
A
A
Liquid (High Pressure)
Gas (Low Pressure)
Total Capacity
Model / Quantity
dB(A)
CFM
kW
EER
SEER
COP
Date:
PUMY-P60NKMU (-BS)
UNIT OPTION
□ Standard Model................................PUMY-P60NKMU
□ Sea Coast (BS) Model..................PUMY-P60NKMU-BS
Model Name
PUMY-P60NKMU (-BS)
60,000
66,000
23° F ~ 115° F (-5 ° ~ +46° C) DB*
-4° F ~ +60° F (-20 ° ~ +15° C) WB
52-11/16 x 41-5/16 x 13 (+1-3/16) / 1,338 x 1050 x 330 (+30)
313 / 142
208 / 230V, 1-phase, 60Hz
4.80
6.15
21.5
27.6
35
40
42
3/8 / 9.52
3/4 / 19.05
50 to 130% of Outdoor Unit Capacity
P06 to P72 / 1 to 12
58/59
Propeller Fan x 2
4,940
22% to 100%
INVERTER-driven Scroll Hermetic x 1
3.0
R410A
FV50S
High Pressure Switch
Compressor Thermo / Overcurrent Detection
Overheat / Voltage Protection
11.3 / 12.5
16.5 / 16.7
3.70 / 3.14