Hitachi 46F500 Operating Manual page 41

AUDIO
Advanced
Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions.
Settings
Audio
Treble
Bass
Balance
Sound Enhancement
Advanced Settings
Move Select
SEL
Press CURSOR or to highlight a function. Press the SELECT button to select the function setting. When the function has a " " in
the box it is ON.
Audio Source
Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving a
weak stereo broadcast or SAP (second audio program) which may be a secondary language, weather report, etc.
The mode you select will be displayed at the left edge of the TV. The source received will be displayed above the mode. See example
below for each selection when both stereo and second audio are received (monaural is always received).
STEREO SELECTED
Audio
Stereo
Selected
ST/SA
Audio
Broadcast
Internal Speakers
On - Select this feature if using the internal speakers only.
Off - Select this feature if you prefer to use only speakers from a separate stereo system.
Auto Noise Cancel
This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will automatically eliminate the audio
for that channel.
Perfect Volume
This function will automatically adjust volume so each channel has the same average volume level.
Loudness
This function will improve the quality of both low and high frequency sounds when listening at low volume levels.
50%
50%
L R
CURSOR
SAP SELECTED
Ant A 31
SAP
NEWS
ST/SA
10:00 PM
41
Audio
Advanced Settings
Audio Source
Stereo Mono 2nd Audio Prog.
Internal Speakers
On Off
Auto Noise Cancel
Perfect Volume
Loudness
Return
Move
SEL
MONO SELECTED
Ant A 31 Mono
NEWS ST/SA
10:00 PM
Ant A 31
NEWS
10:00 PM