Hitachi 46F500 Operating Manual page 26

SPLIT MODE PICTURE-IN-PICTURE
Split Mode PIP displays the main picture and sub-picture evenly on the screen.
SURF MODE PICTURE-IN-PICTURE
This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, Press
the PIP button a second time to remove the sub-pictures from the screen.
Ant A 28
NOTES: 1. If no buttons are pressed when in SURF mode, auto-scanning will continuously scan channels in memory.
(see page 42)
2. If a channel is tuned during this SURF scanning, sub-pictures will be removed from the screen.
3. SURF MODE PIP is allowed only when ANT A or ANT B is selected as the main channel.
4. If MOVIE/TV RATINGS lock functions setting is ON, SURF mode will be deactivated.
5. Closed Caption will not appear when SURF mode is on.
SWAP button
If you wish to switch what is being shown on the main picture to the sub-picture, press the SWAP button.
SPLIT
NOTES: 1. The SWAP button will only operate in POP/SPLIT PIP mode.
2. The SWAP function will not operate if ANT B input is set as the main channel (ANT B input cannot be displayed as
a sub-picture.)
PIP MODE button
To change between the different PIP modes (POP, PIP, SPLIT or SURF) press the PIP MODE button when PIP is ON. Each
press of this button will change PIP to a different mode.
Ant A 10
Ant A 12
PIP MODES will depend on the type of input signal.
Ant A 10
Main Picture
PIP
Ant A 10
Ant A 12
Ant A 10
PIP MODE
PICTURE-IN-PICTURE (PIP) MODES
NTSC (ANT A/B)
480i
480p
720p
1080i
PICTURE-IN-PICTURE (PIP)
Ant A 12
09
PIP
10
12
Ant A 12
SWAP
Ant A 12
PIP MODE
POP PIP SPLIT SURF
YES x YES YES
YES x YES x
x x YES x
x x YES x
x YES YES x
26
Sub Picture
Ant A 10
09
PIP MODE
10
12