Table of Contents
Advertisement
3-3/8 INCH BLADE TOE KICK SAW
ASSEMBLY AND OPERATING INSTRUCTIONS
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
2006 by Harbor Freight Tools
©
contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for assembly and service may not
be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Visit our website at: http://www.harborfreight.com
. All rights reserved. No portion of this manual or any artwork
®
94626
Advertisement
Table of Contents
Related Manuals for Chicago Electric 94626
Summary of Contents for Chicago Electric 94626
- Page 1 © ® contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
-
Page 2: Specifications
Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. REV 09i Page 2 SKU 94626 For technical questions, please call 1-800-444-3353... -
Page 3: Electrical Safety
13. Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury. Page 3 SKU 94626 For technical questions, please call 1-800-444-3353... - Page 4 25. When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. Page 4 SKU 94626 For technical questions, please call 1-800-444-3353...
- Page 5 When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator. Page 5 SKU 94626 For technical questions, please call 1-800-444-3353...
- Page 6 The protruding blade may cut objects that can cause kickback. 12. Maintain labels and nameplates on the Saw. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 13. Always wear ANSI-approved safety impact eye goggles, heavy work gloves, and appropriate work clothes and shoes when using the Saw.
- Page 7 Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.) Page 7 SKU 94626 For technical questions, please call 1-800-444-3353...
-
Page 8: Extension Cords
Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. Protect your extension cords from sharp objects, excessive heat, and damp or wet areas. Page 8 SKU 94626 For technical questions, please call 1-800-444-3353... -
Page 9: Operating Instructions
Refer to the Assembly section, and the Assembly Drawing and Parts List at the end of this manual. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. - Page 10 When the flush cut is complete, release the Trigger and hold the Saw in place until the Saw Blade comes to a complete stop. Unplug the Power Cord (54) from the electrical outlet. Page 10 SKU 94626 For technical questions, please call 1-800-444-3353...
-
Page 11: Inspection, Maintenance, And Cleaning
If they are worn more than half way down, replace them. (An extra set is included.) It could be that they are simply dirty. They can be cleaned using an ink eraser. Replace the Carbon Brushes (36) and Brush Covers (38). Page 11 SKU 94626 For technical questions, please call 1-800-444-3353... -
Page 12: Installing The Saw Blade
Remove Saw Blade and clean our not open easily. Frame (9). Blade Guard Frame. Wood burns or smokes Saw Blade dull. Sharpen or replace Saw Blade. while cutting. REV 07i Page 12 SKU 94626 For technical questions, please call 1-800-444-3353... -
Page 13: Parts List
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 13 SKU 94626 For technical questions, please call 1-800-444-3353... -
Page 14: Assembly Drawing
ASSEMBLY DRAWING Page 14 SKU 94626 For technical questions, please call 1-800-444-3353... -
Page 15: Limited 90-Day Warranty
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This...