Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
18 volt CoRdleSS
REcIpRocaTIng
SaW
Rev 12a
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
visit our website at: http://www.harborfreight.com
email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
Save thiS manual.
ITEM 68852
Advertisement
Table of Contents
Related Manuals for Chicago Electric 68852
Summary of Contents for Chicago Electric 68852
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing Save thiS manual.
-
Page 2: Table Of Contents
Water entering a power tool will increase the risk of electric shock. Page 2 For technical questions, please call 1-800-444-3353. Item 68852... -
Page 3: Personal Safety
Power tools are dangerous in the hands of untrained users. Item 68852 For technical questions, please call 1-800-444-3353. Page 3... -
Page 4: Reciprocating Saw Safety Warnings
These carry important safety information. Keep it out of reach of children. If unreadable or missing, contact Harbor Freight Tools for a replacement. 10. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in 4. Avoid unintentional starting. -
Page 5: Vibration Safety
If any abnormal seek medical advice as soon as possible. vibration occurs, stop use immediately. Save theSe inStRuCtionS. Item 68852 For technical questions, please call 1-800-444-3353. Page 5... -
Page 6: Extension Cords
WARNING marking concerning Risk Risk of Explosion. of Eye Injury. Wear ANSI-approved Do not puncture, short, or open safety goggles with side shields. battery packs and do not charge damaged battery packs. Page 6 For technical questions, please call 1-800-444-3353. Item 68852... -
Page 7: Specifications
Red led: Flashing indicates that the battery is charging. Continuously lit (not flashing) indicates that the battery has finished charging and should be removed from the charger. Charger Green (sold separately) Item 68852 For technical questions, please call 1-800-444-3353. Page 7... -
Page 8: Operation
(not included) to prevent movement while working. or pets to prevent distraction and injury. 3. There must not be objects, such as utility lines, nearby that will present a hazard while working. Page 8 For technical questions, please call 1-800-444-3353. Item 68852... -
Page 9: General Operating Instructions
Saw Blade. Handle down for a slant cut. 2. Lubricate the cutting surface with cutting oil to avoid heat build-up. Follow the “Operating the Reciprocating Saw” section for basic instructions. Item 68852 For technical questions, please call 1-800-444-3353. Page 9... -
Page 10: Maintenance
NIOSH-approved dust mask/respirator while blowing dust out of motor using compressed air. Follow all safety precautions whenever diagnosing or servicing the tool. disconnect Battery pack and Charger power supply before service. Page 10 For technical questions, please call 1-800-444-3353. Item 68852... - Page 11 Torque Spring Bracket Pressure Plate Blade Collet Spring Bearing (6002) Collet Washer Top Pin Pinion Wheel Blade Guard Right Housing Eccentric Pin Saw Blade Screw Needle Bearing Gearshaft Middle Plate Washer Item 68852 For technical questions, please call 1-800-444-3353. Page 11...
-
Page 12: Warranty
90 day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.