Chicago Electric 68888 Owner's Manual

Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
70 AMP
ARC WELDER
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright 2011 by Harbor Freight Tools
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools. Diagrams
within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved. No portion of
Includes:
6 ft. welding cable with multi-angle
Electrode Holder
6 ft. Ground Cable with clamp
Five 1/16" electrodes
Handheld face shield
Chipping hammer with wire brush
Shielded Metal Arc Welder
AC Outlet for a Smooth & Easy Welding Process
120 volt, 20 amp, single phase input
• Weldable materials: steel, stainless steel, cast iron
• Material thickness: Up to 1/8" thick
• Thermal overload protection with indicator light
• Welding current: 40-70 amp AC
• Duty cycle: 30% @ 55 amp (Rated), 20% @ 70 amp (Max.)
• Electrode diameter ranges: 1/16"-3/32"
Read this material before using this product.
Failure to do so can result in serious injury.
SaVE thiS manual.
ITEM 68888