Chicago Electric 68850 Owner's Manual

Chicago Electric 68850 Owner's Manual

18 volt cordless drill / driver

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
18 volt CoRdleSS
DrIll /
DrIvEr
Rev 12a
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
visit our website at: http://www.harborfreight.com
email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
Save thiS manual.
ITEM 68850

Advertisement

Table of Contents
loading

Summary of Contents for Chicago Electric 68850

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing Save thiS manual.
  • Page 2: Table Of Contents

    Water entering a power tool will increase the risk of electric shock. Page 2 For technical questions, please call 1-800-444-3353. Item 68850...
  • Page 3: Personal Safety

    Power tools are dangerous in the hands of untrained users. Item 68850 For technical questions, please call 1-800-444-3353. Page 3...
  • Page 4: Drill Safety Warnings

    (such as a stable metal workbench or If unreadable or missing, contact concrete floor) at least 1 foot away from all flammable Harbor Freight Tools for a replacement. objects, such as drapes or walls. Keep a fire extinguisher and a smoke detector in the area.
  • Page 5: Vibration Safety

    If any abnormal seek medical advice as soon as possible. vibration occurs, stop use immediately. Save theSe inStRuCtionS. Item 68850 For technical questions, please call 1-800-444-3353. Page 5...
  • Page 6: Extension Cords

    WARNING marking concerning Risk Risk of Explosion. of Eye Injury. Wear ANSI-approved Do not puncture, short, or open safety goggles with side shields. battery packs and do not charge damaged battery packs. Page 6 For technical questions, please call 1-800-444-3353. Item 68850...
  • Page 7: Specifications

    Red led: Flashing indicates that the battery is charging. Continuously lit (not flashing) indicates that the battery has finished charging and should be removed from the charger. Charger Green Item 68850 For technical questions, please call 1-800-444-3353. Page 7...
  • Page 8: Operation

    The green power LED will light, showing that power is supplied to the Charger. 10. Press the Battery Button to release Battery Pack from the Charger. Page 8 For technical questions, please call 1-800-444-3353. Item 68850...
  • Page 9: Work Piece And Work Area Set Up

    11. Clean then store the Drill indoors a center punch (not included) to mark the and out of children’s reach. desired hole. This will prevent the drill bit from slipping as the hole is started. Item 68850 For technical questions, please call 1-800-444-3353. Page 9...
  • Page 10: Maintenance

    NIOSH-approved dust mask/respirator while blowing dust out of motor using compressed air. Follow all safety precautions whenever diagnosing or servicing the tool. disconnect Battery pack and Charger power supply before service. Page 10 For technical questions, please call 1-800-444-3353. Item 68850...
  • Page 11 Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 68850 For technical questions, please call 1-800-444-3353. Page 11...
  • Page 12: Warranty

    90 day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents