Download Print this page
American Standard Lucerne Wall Hung Lavatory 0356.066 Specification Sheet

American Standard Lucerne Wall Hung Lavatory 0356.066 Specification Sheet

American standard lucerne wall hung lavatory specification sheet

Advertisement

Quick Links

BARRIER FREE
LUCERNE™ WALL-HUNG LAVATORY
• Wall-hung sink
• Vitreous china
• Front overflow
• "D" shaped bowl
• Self-draining deck area with contoured back
and side splash shields
• Faucet ledge
Both shown with 1340.000 metering faucet
(not included)
Single faucet hole on right:
0356.066 For exposed bracket support
0356.439 For wall hanger (included) or
concealed arms support

Nominal Dimensions:

521 x 464mm
(20-1/2" x 18-1/4")

Bowl sizes:

381mm (15") wide
254mm (10") front to back
171mm (6-3/4") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specified:
❏ Colors: ❏ White ❏ Black
❏ Faucet*:
❏ Gooseneck Spout: 7522.055
❏ Faucet Finish:
❏ Knee Action Mixer: 7676.029
❏ Double Pedal Valve: 7679.012 (wall mounted)
❏ Grid Drain: 2411.015
❏ Trap:
❏ Nipple:
❏ Bracket Support (by others):
❏ Flex Tempered Supply (by others):
❏ Concealed Arms Support (by others):
❏ 6065161.002 Selectronic Valve (1.6 GPF Toilet)
* See faucet section for additional models available
© 2008 AS America Inc.
WALL-HUNG LAVATORY
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-
LINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Top of front rim mounted 864mm (34") from finished floor.
M23
LUCERNE™
VITREOUS CHINA
Revised 8/05

Advertisement

loading

Summary of Contents for American Standard Lucerne Wall Hung Lavatory 0356.066

  • Page 1 BARRIER FREE LUCERNE™ WALL-HUNG LAVATORY • Wall-hung sink • Vitreous china • Front overflow • “D” shaped bowl • Self-draining deck area with contoured back and side splash shields • Faucet ledge Both shown with 1340.000 metering faucet (not included) Single faucet hole on right: ❏...
  • Page 2 BARRIER FREE FINISHED WALL 13mm x 51mm BRACKET (1/2 x 2) SLOTS 44 mm 102 mm (1-3/4) 79 mm (3-1/8) 38 mm (1-1/2) DIA. ANCHOR SCREW HOLES (1-1/16 x 5/16) SLOTS NOTES: PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. CONCEALED ARMS SUPPORT AND EXPOSED BRACKET SUPPORT AS REQUIRED TO BE FURNISHED BY OTHERS.

This manual is also suitable for:

Lucerne 0356.439