Summary of Contents for Heat Controller HFC13XX-0A Series
Page 1
HEAT CONTROLLER, INC Installation, Operation and Maintenance Manual HFC13XX-0A Series Fan Coil Air Handling Units HEAT CONTROLLER, INC. 1900 Wellworth Ave., Jackson, Michigan 49203 Ph. 517-787-2100 Fax 517-787-9341 www.heatcontroller.com THE QUALITY LEADER IN CONDITIONING AIR HFCIOM062606...
A. Introduction 9. Cabinet insulation is rated for R=4.2 (standard). Heat Controller Air Handlers come in a variety of Some jurisdictions require R=6.0 on installations in models and sizes for upflow or horizontal use and non-conditioned space. Add insulation 1” thick to...
Page 3
made prior to installing these lines). For left to required to make the transition between the line set and the coil connector. The evaporator coil has right applications. 1. Remove and set aside front panels. sweat copper connections. The suction line is a swaged solder cup connection.
would provide the occupant a warning if the primary drain is blocked. K. AIR FILTER Air handlers are factory equipped with an air filter. If the return grille has its own filter, the filter installed in the air handler should be removed. Air filter should be inspected and cleaned or replaced as often as is necessary to prevent restriction of air flow (minimum...