Alg_Pop3; Alg_Pptp - D-Link NetDefend DFL-210 Cli Reference Manual

3.4.4. ALG_POP3

3.4.4. ALG_POP3
Description
Use an POP3 Application Layer Gateway to manage POP3 traffic through the system.
Properties
Name
BlockUserPass
HideUser
AllowUnknownCommands
FileListType
FailModeBehavior
File
VerifyContentMimetype
Antivirus
ScanExclude
CompressionRatio
CompressionRatioAction
AllowEncryptedZip
ZDEnabled
ZDNetwork
Comments

3.4.5. ALG_PPTP

Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
Specifies a symbolic name for the ALG. (Identifier)
Block clients from sending USER and PASS command.
(Default: No)
Prevent server from revealing that a user name do not exist.
(Default: No)
Allow unknown commands. (Default: No)
Specifies if the file list contains files to allow or deny. (Default:
Block)
Standard behaviour on error: Allow or Deny. (Default: Deny)
List of file types to allow or deny. (Optional)
Verify that file extentions correspond to the MIME type.
(Default: No)
Disabled, Audit or Protect. (Default: Disabled)
List of files to exclude from antivirus scanning. (Optional)
A compression ratio higher than this value will trigger the ac-
tion in Compression Ratio Action, a value of zero will disable
all compression checks. (Default: 20)
The action to take when high compression threshold is viol-
ated, all actions are logged. (Default: Drop)
Allow encrypted zip files, even though the contents can not be
scanned. (Default: No)
Enable ZoneDefense Block. (Default: No)
Hosts within this network will be blocked at switches if a virus
is found.
Text describing the current object. (Optional)
Chapter 3. Configuration Reference
94