Services - D-Link NetDefend DFL-210 Cli Reference Manual

Network security firewall
Hide thumbs Also See for NetDefend DFL-210:
Table of Contents

Advertisement

2.2.60. services

Run burn-in tests for a set of sub tests. If no sub tests are specified the following are included: -
memory, -ping, -traffic, -cryptoaccel.
selftest -abort
Abort a running self test.
selftest
Show the status of a running test.
Options
-abort
-burnin
-cryptoaccel
-hours[=<Integer>]
-interfaces=<Interface>
-mac
-media
-memory
-minutes[=<Integer>]
-num=<Integer>
-ping
-size=<Integer>
-throughput
-traffic
2.2.60. services
Show runtime values of configured services.
Description
Shows the runtime values of all configured services.
Note
Requires Administrator privilege.
Abort a running self test.
Run burn-in tests for a selected set of sub tests.
Verify the correct functioning of available crypto accelerator
cards.
Test duration in hours. (Default: 48)
Ethernet interface(s).
Check if there are MAC address collisions on the interfaces.
Check the sanity of the disk drive.
Check the sanity of the RAM.
Test duration in minutes. (Default: 0)
Number of times to execute the test. (Default: 1)
Run a ping test over the interfaces.
Size of media space to utilize in the test. Set in MB. (Default:
1)
Run a throughput test over the interfaces. This will show the
maximal achievable interface throughput.
Run a traffic test over the interfaces. The traffic test uses
mixed frame sizes and verifies the content of each received
frame.
67
Chapter 2. Command Reference

Advertisement

Table of Contents
loading

Table of Contents