Statesettings - D-Link NetDefend DFL-210 Cli Reference Manual

3.55.21. StateSettings

_RC4_56_SHA1
TLS_RSA_EXPORT512_WITH_
RC4_40_MD5
TLS_RSA_EXPORT512_WITH_
RC2_40_MD5
TLS_RSA_EXPORT_WITH_NU
LL_SHA1
TLS_RSA_EXPORT_WITH_NU
LL_MD5
3.55.21. StateSettings
Description
Parameters for the state engine in the system.
Properties
ConnReplace
LogOpenFails
LogReverseOpens
LogStateViolations
LogConnections
LogConnectionUsage
MaxConnections_Dynamic
MaxConnections
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
What to do when the connection table is full. (Default: Re-
placeLog)
Log packets that are neither part of open connections nor valid
new connections. (Default: Yes)
Log reverse connection attempts through an established con-
nection. (Default: Yes)
Log packets that violate stateful tracking rules; for instance,
TCP connect sequences. (Default: Yes)
Log connections opening and closing. (Default: Log)
Log for every packet that passes through a connection.
(Default: No)
Allocate the Max Connection value dynamically. (Default:
Yes)
Maximum number of simultaneous connections. (Default:
8192)
Enable
TLS_RSA_EXPORT1024_WITH_RC4_56_SHA1. (Default:
Yes)
Enable
TLS_RSA_EXPORT1024_WITH_RC4_40_MD5. (Default:
No)
Enable
TLS_RSA_EXPORT1024_WITH_RC2_40_MD5. (Default:
No)
Enable cipher TLS_RSA_EXPORT_WITH_NULL_SHA1
(no encryption, just message validation). (Default: No)
Enable cipher TLS_RSA_EXPORT_WITH_NULL_MD5 (no
encryption, just message validation). (Default: No)
201
Chapter 3. Configuration Reference
cipher
cipher
cipher