L2Tpserversettings; Lengthlimsettings - D-Link NetDefend DFL-210 Cli Reference Manual

3.55.12. L2TPServerSettings

IPOPT_TS
IPOPT_RTRALT
IPOPT_OTHER
DirectedBroadcasts
IPRF
StripDFOnSmall
MulticastIPEnetOnMismatch
TTLMinBroadcast
TTLOnLowBroadcast
3.55.12. L2TPServerSettings
Description
PPTP/L2TP server settings.
Properties
L2TPBeforeRules
PPTPBeforeRules
PPP_MaxResends

3.55.13. LengthLimSettings

Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Pass L2TP connections sent to the security gateway directly to the L2TP
engine without consulting the ruleset. (Default: Yes)
Pass PPTP connections sent to the security gateway directly to the PPTP
engine without consulting the ruleset. (Default: Yes)
The maximum number of PPP layer resends. (Default: 10)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
How to handle IP packets with contained Timestamps.
(Default: DropLog)
How to handle IP packets with contained route alert. (Default:
ValidateLogBad)
How to handle IP options not specified above. (Default:
DropLog)
How to handle directed broadcasts being passed from one in-
terface to another. (Default: DropLog)
How to handle the IP Reserved Flag, if set; it should never be.
(Default: DropLog)
Strip the "DontFragment" flag for packets of this size or smal-
ler. (Default: 65535)
What action to take when ethernet and IP multicast addresses
do not match. (Default: DropLog)
The shortest IP broadcast Time-To-Live value accepted on re-
ceipt. (Default: 1)
What action to take on too low broadcast TTL values.
(Default: DropLog)
194
Chapter 3. Configuration Reference