Remotemgmtsnmp; Remotemgmtssh - D-Link NetDefend DFL-210 Cli Reference Manual

3.48.3. RemoteMgmtSNMP

3.48.3. RemoteMgmtSNMP
Description
Configure SNMP management to enable SNMP polling.
Properties
Name
Interface
SNMPGetCommunity
Network
Comments

3.48.4. RemoteMgmtSSH

Description
Configure a Secure Shell (SSH) Server to enable remote management access to the system.
Properties
Name
Interface
Port
AllowAuthMethodPassword
AllowAuthMethodPublicKey
AllowHostKeyDSA
AllowHostKeyRSA
AllowKexDH14
AllowKexDH1
AllowAES128
AllowAES192
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Specifies a symbolic name for the object. (Identifier)
Specifies the interface for which remote access is granted.
Specifies the name of the community to be granted rights to remotely
monitor the security gateway.
Specifies the network for which remote access is granted.
Text describing the current object. (Optional)
Specifies a symbolic name for the SSH server. (Identifier)
Specifies the interface for which remote access is granted.
The listening port for the SSH server. (Default: 22)
Allow password client authentication. (Default: Yes)
Allow public key client authentication. (Default: Yes)
Allow DSA public key algorithm. (Default: Yes)
Allow RSA public key algorithm. (Default: Yes)
Allow Diffie-Hellman Group 1 key exchange algorithm.
(Default: Yes)
Allow Diffie-Hellman Group 14 key exchange algorithm.
(Default: Yes)
Allow AES-128 encryption algorithm. (Default: Yes)
Allow AES-192 encryption algorithm. (Default: Yes)
174
Chapter 3. Configuration Reference