Remotemanagement; Remotemgmthttp; Remotemgmtnetcon - D-Link NetDefend DFL-210 Cli Reference Manual

3.48. RemoteManagement

3.48. RemoteManagement
This is a category that groups the following object types.

3.48.1. RemoteMgmtHTTP

Description
Configure HTTP/HTTPS management to enable remote management to the system.
Properties
Name
Interface
AccessLevel
LocalUserDatabase
HTTP
HTTPS
Network
Comments

3.48.2. RemoteMgmtNetcon

Description
Configure Netcon management to enable remote management to the system.
Properties
Name
Interface
Mode
IdleTimeout
Key
Network
Comments
Specifies a symbolic name for the object. (Identifier)
Specifies the interface for which remote access is granted.
The access level to grant the user that logs in. (Default: Admin)
Specifies the local user database to use for login.
Enable remote management via HTTP. (Default: No)
Enable remote management via HTTPS. (Default: No)
Specifies the network for which remote access is granted.
Text describing the current object. (Optional)
Specifies a symbolic name for the object. (Default: NetconMgmt)
Specifies the interface for which remote access is granted.
Configure, Console or Uptimepoll. (Default: Configure)
Number of seconds of inactivity until the Netcon console user is automatically
logged out. (Default: 900)
64 byte Netcon PSK.
Specifies the network for which remote access is granted.
Text describing the current object. (Optional)
173
Chapter 3. Configuration Reference