Henny Penny Heated Merchandisers HMR-103 Specifications

PROJECT
Heated merchandisers
Full-serve, self-serve, or combination
Bidding Specifications
• Provide specified model (HMR-103, HMR-
104, HMR-105, HMR-106, HMR-107)
Henny Penny HMR Heated Merchandiser in
full-serve, self-serve or selected
configuration of full and self-serve modules.
See model Data Sheet(s) for available
configurations.
• Full-serve unit includes full-front lift-up glass
and adjustable stainless steel pan supports
to accept (1) full-size steam table pan and
(1) third-size steam table pan, up to 4 in.
(102 mm) deep, for each well.
• Self-serve unit includes partial front glass
and flat stainless steel insert.
• Materials—interior and exterior of stainless
steel and tempered glass.
• Merchandiser bases are not included. See
separate specifications sheet.
• Unit shall have rear-mounted control panel
above wells with LED digital display. Upper
and lower heat are controlled
independently, with separate upper radiant
heat control for each well.
• Unit shall feature humidified operation, with
water pan included and Low-Water
warning.
APPROVED APPROVED AS NOTED
AUTHORIZED SIGNATURE
© 2006 Henny Penny Corporation, Eaton, OH 45320 USA Revised10/02/08
QUANTITY
• Customer shall select from four available
front glass profiles, standard.
• Mirrored side glass panels and sliding glass
rear doors are standard, except for CE units
which are clear.
• Unit shall feature proprietary Therma-Vec
Even Heat Process for maintaining precise
food temperatures evenly throughout the
case.
• Food probes shipped with unit.
RESUBMIT
DATE
ITEM NO
MODEL
®
Henny Penny Corporation
PO Box 60 Eaton OH 45320 USA
+1 937 456.8400
+1 937 456.8434 Fax
www.hennypenny.com
HMR-103
HMR-104
HMR-105
HMR-106
HMR-107
800 417.8417
800 417.8434 Fax