Safety Precautions The following safety precautions must be taken into account when using this product. Do not install this product in places where it will come into contact with WARNING combustible gases such as sulfuric gas, hydrogen gas, methane gas, etc. Do not install this product in places that are exposed to direct sunlight, near heating equipments and wet places.
View of the Unit Main Unit Air outlet Air flow direction blade Remote control case Control panel Dust sensor Odor sensor Filter box Power plug Front panel 11 Step Cleaning System Replacement Filter Washable Filter Section Fixed Filter Section Section Pre-filter Ionizer Electrostatic Metal...
Page 5
Control Panel Anion Indicator Operating Mode Indicator Indicator Clean level Indicator Contamination Level Indicator Remote Control Sensor Filter Reset Button & Indicator Power Button Anion Button Clean Level Selection Button Operating Mode Selection Button Indicator Displays the Clean Level by differing its blinking speed. If the air cleaner is operating at the Pollen Mode, the Indicator shows the image of big dust particles by blinking.
etting Started You have just purchased an air cleaner and it has to be installed according to the safety precautions of page 2. This manual contains important information concerning the use of your air cleaner. Please take some time to read this booklet as it will help you take full advantage of the product's features.
Inserting the Battery into the Remote Control You must insert or replace the remote control battery when: You purchase the air cleaner. The remote control does not work properly. Always direct the remote control towards the Remote Control Sensor on the air cleaner when operating it from a distance. When you press a button on the remote control and the air cleaner makes a ringing sound, it means the function has been chosen.
Page 9
This chapter indicates how to operate your air cleaner with the buttons on the control panel.
Selecting the Automatic Mode In the Automatic Mode, the air cleaner automatically adjusts the clean level according to the signal of the more contaminated level after comparing the dusts and motes contamination level with the odor contamination level in the indoor air. Anions are generated into an air automatically and the air flow blade does not move.
Selecting the Pollen Mode The Pollen Mode can eliminate pollen and dust particles effectively in the indoor air. In this operating mode, the air cleaner automatically adjusts the clean level according to the dusts or motes contamination level without the odor contamination level in the indoor air.
Selecting the Sleep Mode If you wish the air cleaner to clean the air in your room quietly, select the Sleep Mode. In this operating mode, the air cleaner runs in "Low Speed" which is the quietest clean level setting. Anions are generated into an air automatically and the air flow blade does not move.
Selecting the Odor Mode If you select the Odor Mode, the air cleaner can eliminate airborne contaminants and harmful smells effectively in the indoor air. In this operating mode, the air cleaner automatically adjusts the clean level according to the signal of the odor contamination level without the dusts and motes contamination level in the indoor air.
Generating Anions The Anion Generator generates anions, which are beneficial to the human body. Use this function if you want to feel refreshed both physically and mentally, just as if you were in the midst of a forest. If the air cleaner is turned on, anions are generated automatically. If necessary, press the (Power) button.
Adjusting the Clean Level (Fan Speed) The air cleaner automatically adjusts the clean level according to the contamination levels of the indoor air. It is also possible for you to manually select the clean level. If necessary, press the (Power) button. Result: The Power indicator on the display comes on.
Page 16
This chapter indicates how to operate your air cleaner with a remote control.
Adjusting the Air Flow Direction The movement of the air flow blade changes according to the operating modes. The air flow blade swings automatically in the Pollen and Odor mode, but it is fixed in one position in the Auto and Sleep mode. The air flow blade can only be controlled with the remote control.
Adjusting the Display Brightness You can adjust the brightness of the display of the air cleaner according to your desire. The brightness can only be controlled with a remote control. If necessary, press the (Power) button. Result: The Power indicator on the display comes on. The air cleaner runs in the Auto Mode.
Adjusting the Clean Level (Fan Speed) The air cleaner automatically adjusts the clean level according to the contamination levels of the indoor air. It is also possible for you to manually select the clean levels. If necessary, press the (Power) button. Result: The Power indicator on the display comes on.
Selecting the Operating Mode You can select the operating mode with a remote control among the Auto, Pollen, Sleep and Odor mode. If necessary, press the (Power) button. Result: The Power indicator on the display comes on. The air cleaner runs in the Auto Mode. The air cleaner makes a ringing sound.
Generating Anions The Anion Generator generates anions, which are beneficial to the human body. Use this function if you want to feel refreshed both physically and mentally, just as if you were in the midst of a forest. If the air cleaner is turned on, anions are generated automatically. If necessary, press the (Power) button.
Operating Recommendations Here are a few recommendations that you should follow when using your air cleaner. Topic Recommendation Wash indicator If the light on the "Wash" indicator comes on, the washable filters must be cleaned. The washable filters must be cleaned more often in environments that include large amounts of dust in the air.
Cleaning the Air Cleaner Cleaning the Lens of the Dust Sensor To get the best possible result from your air cleaner, you must clean the lens of the dust sensor regularly. The dust sensor is responsible for sensing the accumulation level of small and big dust particles in the air in your room.
Page 24
Cleaning the Air Cleaner (cont.) Cleaning the Washable Filters Washable Filters are responsible for eliminating fine particles of dust, molds and mites in the air that are as small as 0.5 microns. It also has the function of sterilizing virus or bacteria in the air in your room. You must clean the Washable Filters every 3 months or whenever the Wash Indicator comes on.
Page 25
Replacing the Replacement Filter The Replacement Filter eliminate finer particles of dust, molds and mites in the air in your room that are as small as 0.3 microns. Open the Filter Box and pull out the Replacement Filter Section towards the direction of the arrow.
Solving Common Problems Before contacting the after-sales service, perform the following simple checks. This may prevent you from making an unnecessary call and wasting your time and money. Problem Explanation/Solution The air cleaner does not Check for a power failure. operate.