Insignia NS-PCS20 Quick Setup Manual

Congratulations on your purchase of a
high-quality Insignia product. Your
NS-PCS20 is designed for reliable and
trouble-free performance.

Package contents

• Stereo speakers (2)
• AC adapter
• Quick Setup Guide
Before using your new product, please read these
instructions to prevent any damage.
Features
1 Power button Press to turn on your speaker
system. Press again to turn off
your speaker system.
2 Headphone Connect your favorite
output jack headphones to this jack. They
will mute the speaker system
automatically. The master
volume control can then be
used to turn up or down the
volume to your headphones.
3 Master volume Rotate clockwise to turn the
control volume up or
counterclockwise to turn the
volume down.
Quick Setup Guide I NS-PCS20 2.0 computer speakers
Setting up your speaker system
Positioning your speaker system
• Place the speakers on the opposite sides of the
device they are connected to and as far apart as
possible.
Connecting to a computer
1 Make sure that the computer and your speaker
system are turned off and unplugged from the
power outlet.
2 Plug the cable with the green plug on the right
speaker into the audio out jack on the computer
(this jack is usually green).
3 Plug the black plug from the AC adapter into the
back of the right speaker and the other end into a
wall outlet or power strip.
4 Turn on the computer and your speaker system.
Connecting to portable audio devices
1 Make sure the portable audio device and your
speaker system are turned off and unplugged.
2 Plug the green audio cable attached to the speaker
into your audio device.
3 Plug the black plug from the AC adapter into the
back of the right speaker and the other end into a
wall outlet or power strip.
4 Turn on the portable audio device and your
speaker system.