Cleaning The Outside Of The Machine; Cleaning The Scanner Glass - Brother FAX-2840 Basic User's Manual

Cleaning the outside of the
machine
a
Turn off the machine. Unplug the
telephone line cord first, disconnect all
cables, and then unplug the power cord
from the electrical socket.
Note
(For FAX-2840 and FAX-2845) 
To prevent you from losing any important
messages, see Transferring your faxes or
Fax Journal report uu page 67.
b
Pull the paper tray completely out of the
machine.
c
Wipe the outside of the machine with a
dry, lint-free soft cloth to remove dust.
50
d
Remove any paper that is in the paper
tray.
A
e
Wipe the inside and the outside of the
paper tray with a dry, lint-free soft cloth
to remove dust.
f
Re-load the paper and put the paper tray
firmly back in the machine.
g
Plug the machine's power cord back into
the electrical socket first, connect all
cables, and then plug in the telephone
line cord. Turn on the machine.

Cleaning the scanner glass

a
Turn off the machine's power switch.
Unplug the telephone line cord first,
disconnect all cables, and then unplug
the power cord from the AC power
outlet.
Note
(For FAX-2840 and FAX-2845) 
To prevent you from losing any important
messages, see Transferring your faxes or
Fax Journal report uu page 67.
b
Lift the control panel cover (1).
Carefully remove dirt from the glass strip
(2) and the white bar (3) above it with a
soft lint-free cloth moistened with water.
A