Download Print this page
American Standard 9441.000.020 - 9441.000.020 Standard Collection Washstand Specification Sheet
American Standard 9441.000.020 - 9441.000.020 Standard Collection Washstand Specification Sheet

American Standard 9441.000.020 - 9441.000.020 Standard Collection Washstand Specification Sheet

American standard washstand specification sheet

Advertisement

Quick Links

Standard Collection
Standard Collection
• Period reproduction of classic dry sink washstand
• Turned leg detailing with lower drawer storage
includes chrome hardware (installed) extra satin
hardware included
• Washstand available in White or Warm
Walnut finishes
• Console/pedestal top with faucet holes on
8" (203mm) centers
• Recommended design-matched 8" spread faucet
#2881 available in chrome or satin finish
• Right Height™ for greater comfort during use
• Design matched to Standard Collection
Separate Components:
0283.008 Washstand/Pedestal top
8" (203mm) centers
9441.000.020 Washstand Only (White)
9441.000.329 Washstand Only (Warm Walnut)
Nominal Dimensions with sink:
26-3/4" x 20" x 36"
(679 x 508 x 914mm)
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.9M for Non-Vitreous
Ceramic Fixtures
• CAN/CSA B45 Series
To Be Specified:
❏ Color:
❏ Pedestal Top: 020 White or 222 Linen
❏ Washstand: 020 White or 329 Warm Walnut
❏ Recommended Faucet: 8" spread No. 2881
❏ Faucet Finish: Chrome or Satin
❏ Supplies:
❏ 1-1/4" Trap: 752683-495
❏ P-Trap Finish:
Warm Walnut
White
© 2008 AS America Inc.
®
WASHSTAND with
®
Oval Pedestal Top
toilet
®
Standard Collection
FINISHED WALL
(260mm)
FINISHED
WALL
SUPPLIES AS
36"
1-1/4" O.D.
(914mm)
8-1/2 "
(216mm)
17-15/16 "
(456mm)
FINISHED
FLOOR
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P"
TRAP ARE SUGGESTED.
- FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No
responsibility is assumed for use of superseded or voided pages.
I27
WASHSTAND
FIRE CLAY/WOOD
13"
(330mm)
8"
(203mm)
10-1/4"
1-3/4" DIA.
STD. DRAIN
OUTLET
26-3/4"
(680mm)
REQUIRED
WASTE
8"
(203mm)
(559mm)
22-5/8 "
(575mm)
Revised 2/08
®
3-7/8"
(98mm)
3/4"
(19mm)
20"
(508mm)
7-1/2"
(191mm)
28-1/2"
(724mm)
22"
24"
(610mm)

Advertisement

loading

This manual is also suitable for:

Fire clay/wood 9441.000.329Retrospect collection csa b45 seriesStandard collection console table 0283.008Clay/ 9441.000.020