Remington smooth & silky WDF-1250 Use And Care Manual

smooth silky
WDF-1250
Use and
Care Guide
Register Your New Product Today!
By registering your new Remington ® product you will receive these important benefits:
Proof of ownership • Product protection • Product registration • Special offers
Register online at: www.remington-products.com
Product Features
Congratulations on your purchase of a Remington ® brand
Smooth & Silky ® wet/dry shaver. The model you have purchased
can be used in or out of the shower and is designed to hug the
curves of a woman's body for a close, fast shave.
(A)
Shaver Parts
A. Screens
B. Head release button
(only on one side)
(C)
C. Floating trimmer
D. ON/OFF button
(B)
E. Battery compartment release
F. Head Guard
(F)
(D)
(E)
Power System
n Battery operated shaver takes 2 AA batteries (included).
Floating Trimmer
n Floating trimmers flex in response to how much pressure
you apply to give you the closest most comfortable shave.
How To Use
Inserting Batteries Into Your WDF-1250
Before using your battery-operated shaver, you will need to
insert 2 AA alkaline batteries. We recommend Rayovac brand
®
alkaline batteries.
1. Turn the bottom tip of the shaver counter clockwise and
pull. The bottom third of the shaver should easily pull
away, exposing the battery compartment.
2. Align the (+) and (-) symbols and insert 2 AA alkaline
batteries into the compartment.
3. Return the bottom of the shaver to its original position and
turn the bottom tip clockwise to lock it in place.
Operating Your Shaver
n Remove the protective head
guard before shaving.
n Press the ON/ OFF button to
turn the shaver on.
n Hold the shaver so both screens touch your skin at the
same time. This allows the shaver to work the way it was
designed for the closest shave and minimum wear. Avoid
holding the shaver at an angle so only one screen touches
the skin at a time. This can distort the screen and could
cause skin irritation.
n After shaving, press the ON/OFF button again to turn the
shaver off.
n Rinse the shaver head and replace the protective head
guard.
Wet/Dry Use
All Smooth & Silky ® shavers give you a great, close shave wet or
dry. Your Smooth & Silky shaver is fully submersible in water,
®
so you can shave with foam or soapy lather, in the shower or
the tub. Dry use is great for a quick, close shave when you're in
a hurry; no special preparation is necessary. After shaving, wet
or dry, simply run the shaver under cold water to clean it. (See
"Cleaning & Maintenance' section for details.)
Wet/Dry Cautions
n Always use cold or warm water to rinse your shaver. Very
hot water, sea water, or cleanser could damage it.
n Do not leave the shaver submerged in water.
Operating The Trimmer
All Smooth & Silky ® shavers are equipped with a trimmer
that works with the foils to give you an extra close and
comfortable shave.